Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   DENG Qingfang <dqfext@gmail.com>
To:     Ansuel Smith <ansuelsmth@gmail.com>
Cc:     Florian Fainelli <f.fainelli@gmail.com>,
        Andrew Lunn <andrew@lunn.ch>,
        Heiner Kallweit <hkallweit1@gmail.com>,
        Russell King <linux@armlinux.org.uk>,
        "David S. Miller" <davem@davemloft.net>,
        Jakub Kicinski <kuba@kernel.org>, linux-kernel@vger.kernel.org,
        netdev@vger.kernel.org
Subject: Re: [RFC PATCH net-next v4 28/28] net: phy: add qca8k driver for qca8k switch internal PHY
Date:   Sat,  8 May 2021 12:35:35 +0800
Message-Id: <20210508043535.18520-1-dqfext@gmail.com>
In-Reply-To: <20210508002920.19945-28-ansuelsmth@gmail.com>
References: <20210508002920.19945-1-ansuelsmth@gmail.com> <20210508002920.19945-28-ansuelsmth@gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
Precedence: bulk

On Sat, May 08, 2021 at 02:29:18AM +0200, Ansuel Smith wrote:
> Add initial support for qca8k internal PHYs. The internal PHYs requires
> special mmd and debug values to be set based on the switch revision
> passwd using the dev_flags. Supports output of idle, receive and eee_wake
> errors stats.
> Some debug values sets can't be translated as the documentation lacks any
> reference about them.

I think this can be merged into at803x.c, as they have almost the same
registers, and some features such as interrupt handler and cable test
can be reused.

> 
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> ---