Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Subject: Re: [PATCH 0/3] iio: accel: kxcjk-1013: Add support for KX023-1025
To:     Stephan Gerhold <stephan@gerhold.net>,
        Jonathan Cameron <jic23@kernel.org>
Cc:     Lars-Peter Clausen <lars@metafoo.de>,
        Rob Herring <robh+dt@kernel.org>,
        Robert Yang <decatf@gmail.com>, linux-iio@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        =?UTF-8?B?TWljaGHFgiBNaXJvc8WCYXc=?= <mirq-linux@rere.qmqm.pl>,
        Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>,
        ~postmarketos/upstreaming@lists.sr.ht
References: <20210511095409.9290-1-stephan@gerhold.net>
From:   Hans de Goede <hdegoede@redhat.com>
Message-ID: <91258724-09cc-ed39-2277-6fbcca0c53e9@redhat.com>
Date:   Tue, 11 May 2021 12:44:23 +0200
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101
 Thunderbird/78.8.1
MIME-Version: 1.0
In-Reply-To: <20210511095409.9290-1-stephan@gerhold.net>
Content-Type: text/plain; charset=utf-8
Content-Language: en-US
Content-Transfer-Encoding: 7bit
Precedence: bulk

Hi,

On 5/11/21 11:54 AM, Stephan Gerhold wrote:
> KX023-1025 [1] is another accelerometer from Kionix that has lots
> of additional functionality compared to KXCJK-1013. It combines the
> motion interrupt functionality from KXCJK with the tap detection
> from KXTF9, plus a lot more other functionality.
> 
> This patch set does not add support for any of the extra functionality,
> but makes basic functionality work with the existing kxcjk-1013 driver.
> 
> At first, the register map for the KX023-1025 seems quite different
> from the other accelerometers supported by the kxcjk-1013.
> However, it turns out that at least most of the register bits
> still mean the same for KX023-1025.
> 
> This patch set refactors the kxcjk-1013 driver a little bit
> to get the register addresses from a chip-specific struct.
> The register bits can be re-used for all the different chips.
> 
> The KX023-1025 is used in several smartphones from Huawei.
> I tested these changes on a Huawei Ascend G7, someone else reported
> they also work fine on the Huawei Honor 5X (codename "kiwi").
> 
> [1]: https://kionixfs.azureedge.net/en/datasheet/KX023-1025%20Specifications%20Rev%2012.0.pdf
> 
> Stephan Gerhold (3):
>   dt-bindings: iio: kionix,kxcjk1013: Document kionix,kx023-1025
>   iio: accel: kxcjk-1013: Refactor configuration registers into struct
>   iio: accel: kxcjk-1013: Add support for KX023-1025

Thanks, the entire series looks good to me:

Reviewed-by: Hans de Goede <hdegoede@redhat.com>

for the series.

Regards,

Hans