Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1422858AbWJYAVr (ORCPT ); Tue, 24 Oct 2006 20:21:47 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1422859AbWJYAVr (ORCPT ); Tue, 24 Oct 2006 20:21:47 -0400 Received: from ug-out-1314.google.com ([66.249.92.171]:58157 "EHLO ug-out-1314.google.com") by vger.kernel.org with ESMTP id S1422858AbWJYAVq (ORCPT ); Tue, 24 Oct 2006 20:21:46 -0400 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:from:to:cc:subject:date:mime-version:content-type:content-transfer-encoding:x-mailer:in-reply-to:thread-index:x-mimeole:message-id; b=KCXVUngUexiUsyDUVyZhFdIPUb8Wmzhq0reC91m+f+ESfgvmO58tKOea39A/w/oyfCV9204537ft1X7grPHKYiQ9MZiVKG35C99dfAo/LFHqWA7pzXJ0trxzqru3Drmen7MUCKeeZ4GLMRdFsIMn9HsQ6tRapn6GX8JQrdyOmRo= From: "Michael" To: "'Sergio Monteiro Basto'" Cc: Subject: RE: PROBLEM: Oops when doing disk heavy disk I/O Date: Wed, 25 Oct 2006 10:21:30 +1000 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Mailer: Microsoft Office Outlook, Build 11.0.5510 In-Reply-To: <1161710801.1242.6.camel@localhost.localdomain> Thread-Index: Acb3lNgiPNwgvRr2S+W4H06nZq2blAANgY0Q X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2962 Message-ID: <453eae16.5da1afe7.3681.ffffb56e@mx.google.com> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 19920 Lines: 484 > -----Original Message----- > From: Sergio Monteiro Basto [mailto:sergio@sergiomb.no-ip.org] > Sent: Wednesday, 25 October 2006 3:27 AM > > Hi, > please boot with "report_lost_ticks" like > http://marc.theaimsgroup.com/?l=linux-kernel&m=115545986619977&w=2 > and see if you have > time.c: Lost n timer tick(s)! > > and > cat /sys/devices/system/clocksource/clocksource0/ > > cat /sys/devices/system/clocksource/clocksource0/current_clocksource > > Hi, Yep, seems to be losing some ticks -- I'm not sure what that means, but is it bad? :-) [ root @ barbossa : ~ ] # dmesg | grep tick Command line: root=/dev/md1 ro report_lost_ticks Kernel command line: root=/dev/md1 ro report_lost_ticks time.c: Lost 1 timer tick(s)! rip release_console_sem+0x196/0x20c) time.c: Lost 12 timer tick(s)! rip setup_boot_APIC_clock+0x11f/0x121) time.c: Lost 2 timer tick(s)! rip __do_softirq+0x4a/0xc4) (I've put a full dmesg below). Also, for the clocksource: [ root @ barbossa : ~ ] # ls /sys/devices/system/clocksource/clocksource0/ available_clocksource current_clocksource [ root @ barbossa : ~ ] # cat /sys/devices/system/clocksource/clocksource0/ cat: /sys/devices/system/clocksource/clocksource0/: Is a directory [ root @ barbossa : ~ ] # cat /sys/devices/system/clocksource/clocksource0/available_clocksource jiffies [ root @ barbossa : ~ ] # cat /sys/devices/system/clocksource/clocksource0/current_clocksource jiffies Thanks for your help. Cheers, Michael Full dmesg: [ root @ barbossa : ~ ] # dmesg Linux version 2.6.19-rc3 (root@barbossa) (gcc version 4.1.2 20061007 (prerelease) (Debian 4.1.1-16)) #1 SMP Tue Oct 24 22:23:07 EST 2006 Command line: root=/dev/md1 ro report_lost_ticks BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fee0000 (usable) BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS) BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data) BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 524000) 1 entries of 256 used end_pfn_map = 1048576 DMI 2.4 present. ACPI: RSDP (v002 Nvidia ) @ 0x00000000000f7760 ACPI: XSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fee30c0 ACPI: FADT (v003 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007feec380 ACPI: HPET (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000098) @ 0x000000007feec580 ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007feec600 ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007feec4c0 ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000 Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 524000) 1 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 524000 On node 0 totalpages: 523903 DMA zone: 56 pages used for memmap DMA zone: 1737 pages reserved DMA zone: 2206 pages, LIFO batch:0 DMA32 zone: 7108 pages used for memmap DMA32 zone: 512796 pages, LIFO batch:31 Normal zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Setting APIC routing to flat ACPI: HPET id: 0x10de8201 base: 0xfefff000 Using ACPI (MADT) for SMP configuration information Nosave address range: 000000000009f000 - 00000000000a0000 Nosave address range: 00000000000a0000 - 00000000000f0000 Nosave address range: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 7ff00000:70100000) PERCPU: Allocating 33408 bytes of per cpu data Built 1 zonelists. Total pages: 515002 Kernel command line: root=/dev/md1 ro report_lost_ticks Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Console: colour VGA+ 80x25 time.c: Lost 1 timer tick(s)! rip release_console_sem+0x196/0x20c) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... CPU 0: aperture @ c8f4000000 size 32 MB Aperture too small (32 MB) No AGP bridge found Memory: 2045020k/2096000k available (4241k kernel code, 50228k reserved, 1733k data, 272k init) Calibrating delay using timer specific routine.. 4022.98 BogoMIPS (lpj=8045974) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) SMP alternatives: switching to UP code Freeing SMP alternatives: 48k freed ACPI: Core revision 20060707 Using local APIC timer interrupts. result 12559460 Detected 12.559 MHz APIC timer. time.c: Lost 12 timer tick(s)! rip setup_boot_APIC_clock+0x11f/0x121) Brought up 1 CPUs testing NMI watchdog ... OK. time.c: Using 25.000000 MHz WALL HPET GTOD HPET/TSC timer. time.c: Detected 2009.511 MHz processor. checking if image is initramfs... it is Freeing initrd memory: 3210k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:07.0 PCI: Transparent bridge - 0000:00:06.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0, disabled. SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI-DMA: Disabling IOMMU. PCI: Bridge: 0000:00:06.0 IO window: d000-dfff MEM window: fc800000-fd7fffff PREFETCH window: 80000000-800fffff PCI: Bridge: 0000:00:0a.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0b.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0d.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0f.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:06.0 to 64 PCI: Setting latency timer of device 0000:00:0a.0 to 64 PCI: Setting latency timer of device 0000:00:0b.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 PCI: Setting latency timer of device 0000:00:0f.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1161771160.632:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). fuse init (API version 7.7) JFS: nTxBlock = 8192, nTxLock = 65536 SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) time.c: Lost 2 timer tick(s)! rip __do_softirq+0x4a/0xc4) PCI: Setting latency timer of device 0000:00:0a.0 to 64 pcie_portdrv_probe->Dev[0376:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0a.0:pcie00] PCI: Setting latency timer of device 0000:00:0b.0 to 64 pcie_portdrv_probe->Dev[0374:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0b.0:pcie00] PCI: Setting latency timer of device 0000:00:0c.0 to 64 pcie_portdrv_probe->Dev[0374:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0c.0:pcie00] PCI: Setting latency timer of device 0000:00:0d.0 to 64 pcie_portdrv_probe->Dev[0378:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] PCI: Setting latency timer of device 0000:00:0e.0 to 64 pcie_portdrv_probe->Dev[0375:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] PCI: Setting latency timer of device 0000:00:0f.0 to 64 pcie_portdrv_probe->Dev[0377:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0f.0:pcie00] vga16fb: initializing vga16fb: mapped to 0xffff8100000a0000 fb0: VGA16 VGA frame buffer device ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: Fan [FAN] (on) ACPI: Getting cpuindex for acpiid 0x1 ACPI: Thermal Zone [THRM] (40 C) Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize loop: loaded (max 8 devices) forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.57. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:08.0 to 64 forcedeth: using HIGHDMA eth0: forcedeth.c: subsystem: 01043:8239 bound to 0000:00:08.0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE-MCP55: IDE controller at PCI slot 0000:00:04.0 NFORCE-MCP55: chipset revision 161 NFORCE-MCP55: not 100% native mode: will probe irqs later NFORCE-MCP55: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE-MCP55: 0000:00:04.0 (rev a1) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA Probing IDE interface ide0... hda: IC35L040AVVN07-0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hda: max request size: 128KiB hda: 80418240 sectors (41174 MB) w/1863KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 > ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs usbmon: debugfs is not available ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected 116x: driver isp116x-hcd, 03 Nov 2005 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 21, io mem 0xfe02f000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected USB Universal Host Controller Interface driver v3.0 sl811: driver sl811-hcd, 19 May 2005 usbcore: registered new interface driver cdc_acm drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input0 input: AT Translated Set 2 keyboard as /class/input/input1 I2O subsystem v1.325 i2o: max drivers = 8 I2O Configuration OSM v1.323 I2O Bus Adapter OSM v1.317 I2O Block Device OSM v1.325 I2O SCSI Peripheral OSM v1.316 I2O ProcFS OSM v1.316 i2c /dev entries driver i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c40 md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 raid6: int64x1 1847 MB/s raid6: int64x2 2357 MB/s raid6: int64x4 2379 MB/s raid6: int64x8 1679 MB/s raid6: sse2x1 2697 MB/s raid6: sse2x2 3699 MB/s raid6: sse2x4 3815 MB/s raid6: using algorithm sse2x4 (3815 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 raid5: automatically using best checksumming function: generic_sse generic_sse: 6186.000 MB/sec raid5: using function: generic_sse (6186.000 MB/sec) md: multipath personality registered for level -4 md: faulty personality registered for level -5 device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded device-mapper: multipath round-robin: version 1.0.0 loaded device-mapper: multipath emc: version 0.0.3 loaded Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (8192 buckets, 65536 max) - 312 bytes per conntrack ctnetlink v0.90: registering with nfnetlink. ip_conntrack_pptp version 3.1 loaded ip_nat_pptp version 3.0 loaded ip_tables: (C) 2000-2006 Netfilter Core Team ClusterIP Version 0.8 loaded successfully arp_tables: (C) 2002 David S. Miller TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 NET: Registered protocol family 8 NET: Registered protocol family 20 Freeing unused kernel memory: 272k freed md: md0 stopped. md: bind raid1: raid set md0 active with 1 out of 2 mirrors md: md1 stopped. md: bind raid1: raid set md1 active with 1 out of 2 mirrors EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. (fs/jbd/recovery.c, 255): journal_recover: JBD: recovery, exit status 0, recovered transactions 15992 to 16718 (fs/jbd/recovery.c, 257): journal_recover: JBD: Replayed 6324 and revoked 1/4 blocks kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. Adding 1052248k swap on /dev/hda3. Priority:-1 extents:1 across:1052248k EXT3 FS on md1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on md0, internal journal EXT3-fs: mounted filesystem with ordered data mode. eth0: no IPv6 routers present - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/