Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Rob Herring <robh@kernel.org>
To:     Doug Zobel <dougdev334@gmail.com>
Cc:     Rob Herring <robh+dt@kernel.org>, devicetree@vger.kernel.org,
        Jacek Anaszewski <jacek.anaszewski@gmail.com>,
        linux-kernel@vger.kernel.org, linux-leds@vger.kernel.org,
        Pavel Machek <pavel@ucw.cz>
In-Reply-To: <20210511204834.2675271-3-dougdev334@gmail.com>
References: <20210511204834.2675271-1-dougdev334@gmail.com> <20210511204834.2675271-3-dougdev334@gmail.com>
Subject: Re: [PATCH 2/2] dt: bindings: lp55xx: Add predefined LED pattern
Date:   Wed, 12 May 2021 13:35:16 -0500
Message-Id: <1620844516.492214.204079.nullmailer@robh.at.kernel.org>
Precedence: bulk

On Tue, 11 May 2021 15:48:34 -0500, Doug Zobel wrote:
> Add a new device tree object for LP5562 predfined led patterns.
> 
> Signed-off-by: Doug Zobel <dougdev334@gmail.com>
> ---
>  .../devicetree/bindings/leds/leds-lp55xx.yaml | 103 +++++++++++++++++-
>  1 file changed, 102 insertions(+), 1 deletion(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/leds/leds-lp55xx.example.dts:159.28-172.20: Warning (unit_address_vs_reg): /example-0/i2c/led-controller@30/pattern@1: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/leds/leds-lp55xx.example.dts:174.28-209.20: Warning (unit_address_vs_reg): /example-0/i2c/led-controller@30/pattern@2: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/leds/leds-lp55xx.example.dts:147.24-151.20: Warning (unique_unit_address): /example-0/i2c/led-controller@30/led@1: duplicate unit-address (also used in node /example-0/i2c/led-controller@30/pattern@1)
Documentation/devicetree/bindings/leds/leds-lp55xx.example.dts:153.24-157.20: Warning (unique_unit_address): /example-0/i2c/led-controller@30/led@2: duplicate unit-address (also used in node /example-0/i2c/led-controller@30/pattern@2)

See https://patchwork.ozlabs.org/patch/1477300

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.