Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Mark Kettenis <mark.kettenis@xs4all.nl>
To:     devicetree@vger.kernel.org
Cc:     Mark Kettenis <kettenis@openbsd.org>,
        Hector Martin <marcan@marcan.st>,
        Linus Walleij <linus.walleij@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        linux-arm-kernel@lists.infradead.org, linux-gpio@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: [PATCH 0/2] Apple M1 pinctrl DT bindings
Date:   Sun, 16 May 2021 20:32:16 +0200
Message-Id: <20210516183221.93686-1-mark.kettenis@xs4all.nl>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Mark Kettenis <kettenis@openbsd.org>

This small series adds bindings for the pin and GPIO controller found
on the Apple M1 SoC.

At this point, the primary consumer for these bindings is U-Boot.
With the help of these bindings U-Boot can bring up the PCIe root
complex into a state where the OS use it without having to deal with
the GPIO pins.  A Linux driver may be implemented later to support
power management and/or other devices that need GPIO control.  Since
the binding is based on standard pinmux node bindings this should be
relatively easy.

Changelog:

v2: - Fix typo in DT schema


Mark Kettenis (2):
  dt-bindings: pinctrl: Add DT bindings for apple,pinctrl
  arm64: apple: Add pinctrl nodes

 .../bindings/pinctrl/apple,pinctrl.yaml       | 103 ++++++++++++++++++
 MAINTAINERS                                   |   2 +
 arch/arm64/boot/dts/apple/t8103.dtsi          |  83 ++++++++++++++
 include/dt-bindings/pinctrl/apple.h           |  13 +++
 4 files changed, 201 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
 create mode 100644 include/dt-bindings/pinctrl/apple.h

-- 
2.31.1