Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
IronPort-SDR: 7qJUwtA9Uaz5RAzBb2aImJUBNLXn44+KHWVi5VGY2sT7xHWlNhtGN3xmRpZ94sZOEw26+gXrqs
 0gdnHx0GLIwA==
IronPort-SDR: S/3PXjdjnMfHkaMCBcTuZpdrVDUa60Qwuw+4IH4WQBnCWf4UdfvFW/Ppx79wW4Z7aZOLsn3yhF
 mzzIZbTTZznQ==
From:   Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
To:     daniel.lezcano@linaro.org, rui.zhang@intel.com, amitk@kernel.org
Cc:     linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
        Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Subject: [PATCH 2/2] thermal: int340x: processor_thermal: Export additional attributes
Date:   Sun, 16 May 2021 23:14:41 -0700
Message-Id: <20210517061441.1921901-3-srinivas.pandruvada@linux.intel.com>
In-Reply-To: <20210517061441.1921901-1-srinivas.pandruvada@linux.intel.com>
References: <20210517061441.1921901-1-srinivas.pandruvada@linux.intel.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Export additional attributes:

ddr_data_rate (RO) : Show current DDR (Double Data Rate) data rate.
rfi_restriction (RW) : Show or set current state for RFI (Radio
			Frequency Interference) protection.

These attributes use mailbox commands to get/set information. Here
command codes are:
0x0007: Read RFI restriction
0x0107: Read DDR data rate
0x0008: Write RFI restriction

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
---
 .../int340x_thermal/processor_thermal_rfim.c  | 55 +++++++++++++++++++
 1 file changed, 55 insertions(+)

diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_rfim.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_rfim.c
index aef993a813e2..2b8a3235d518 100644
--- a/drivers/thermal/intel/int340x_thermal/processor_thermal_rfim.c
+++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_rfim.c
@@ -190,6 +190,59 @@ static DEVICE_ATTR_RO(ddr_data_rate_point_2);
 static DEVICE_ATTR_RO(ddr_data_rate_point_3);
 static DEVICE_ATTR_RW(rfi_disable);
 
+static ssize_t rfi_restriction_store(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	u16 cmd_id = 0x0008;
+	u32 cmd_resp;
+	u32 input;
+	int ret;
+
+	ret = kstrtou32(buf, 10, &input);
+	if (ret)
+		return ret;
+
+	ret = processor_thermal_send_mbox_cmd(to_pci_dev(dev), cmd_id, input, &cmd_resp);
+	if (ret)
+		return ret;
+
+	return count;
+}
+
+static ssize_t rfi_restriction_show(struct device *dev,
+				    struct device_attribute *attr,
+				    char *buf)
+{
+	u16 cmd_id = 0x0007;
+	u32 cmd_resp;
+	int ret;
+
+	ret = processor_thermal_send_mbox_cmd(to_pci_dev(dev), cmd_id, 0, &cmd_resp);
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "%u\n", cmd_resp);
+}
+
+static ssize_t ddr_data_rate_show(struct device *dev,
+				  struct device_attribute *attr,
+				  char *buf)
+{
+	u16 cmd_id = 0x0107;
+	u32 cmd_resp;
+	int ret;
+
+	ret = processor_thermal_send_mbox_cmd(to_pci_dev(dev), cmd_id, 0, &cmd_resp);
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "%u\n", cmd_resp);
+}
+
+static DEVICE_ATTR_RW(rfi_restriction);
+static DEVICE_ATTR_RO(ddr_data_rate);
+
 static struct attribute *dvfs_attrs[] = {
 	&dev_attr_rfi_restriction_run_busy.attr,
 	&dev_attr_rfi_restriction_err_code.attr,
@@ -199,6 +252,8 @@ static struct attribute *dvfs_attrs[] = {
 	&dev_attr_ddr_data_rate_point_2.attr,
 	&dev_attr_ddr_data_rate_point_3.attr,
 	&dev_attr_rfi_disable.attr,
+	&dev_attr_ddr_data_rate.attr,
+	&dev_attr_rfi_restriction.attr,
 	NULL
 };
 
-- 
2.27.0