Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Mon, 17 May 2021 17:38:01 -0500
From:   Rob Herring <robh@kernel.org>
To:     Sander Vanheule <sander@svanheule.net>
Cc:     Pavel Machek <pavel@ucw.cz>, Lee Jones <lee.jones@linaro.org>,
        Linus Walleij <linus.walleij@linaro.org>,
        linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
        linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/5] dt-bindings: mfd: Binding for RTL8231
Message-ID: <20210517223801.GA3327704@robh.at.kernel.org>
References: <cover.1620735871.git.sander@svanheule.net>
 <73e017d08117cee1290b9483c23f79f956f41a6d.1620735871.git.sander@svanheule.net>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <73e017d08117cee1290b9483c23f79f956f41a6d.1620735871.git.sander@svanheule.net>
Precedence: bulk

On Tue, May 11, 2021 at 02:25:20PM +0200, Sander Vanheule wrote:
> Add a binding description for the Realtek RTL8231, a GPIO and LED
> expander chip commonly used in ethernet switches based on a Realtek
> switch SoC. These chips can be addressed via an MDIO or SMI bus, or used
> as a plain 36-bit shift register.
> 
> This binding only describes the feature set provided by the MDIO/SMI
> configuration, and covers the GPIO, PWM, and pin control properties. The
> LED properties are defined in a separate binding.
> 
> Signed-off-by: Sander Vanheule <sander@svanheule.net>
> ---
>  .../bindings/mfd/realtek,rtl8231.yaml         | 202 ++++++++++++++++++
>  1 file changed, 202 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/realtek,rtl8231.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mfd/realtek,rtl8231.yaml b/Documentation/devicetree/bindings/mfd/realtek,rtl8231.yaml
> new file mode 100644
> index 000000000000..2023cfa887a3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/realtek,rtl8231.yaml
> @@ -0,0 +1,202 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/realtek,rtl8231.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Realtek RTL8231 GPIO and LED expander.
> +
> +maintainers:
> +  - Sander Vanheule <sander@svanheule.net>
> +
> +description: |
> +  The RTL8231 is a GPIO and LED expander chip, providing up to 37 GPIOs, up to
> +  88 LEDs, and up to one PWM output. This device is frequently used alongside
> +  Realtek switch SoCs, to provide additional I/O capabilities.
> +
> +  To manage the RTL8231's features, its strapping pins can be used to configure
> +  it in one of three modes: shift register, MDIO device, or SMI device. The
> +  shift register mode does not need special support. In MDIO or SMI mode, most
> +  pins can be configured as a GPIO output, LED matrix scan line/column, or as a
> +  PWM output.
> +
> +  The GPIO and pin control are part of the main node. PWM and LED support are
> +  configured as sub-nodes.
> +
> +properties:
> +  compatible:
> +    const: realtek,rtl8231
> +
> +  reg:
> +    description: MDIO or SMI device address.
> +    maxItems: 1
> +
> +  # GPIO support
> +  gpio-controller: true
> +
> +  "#gpio-cells":
> +    const: 2
> +    description: |
> +      The first cell is the pin number and the second cell is used to specify
> +      the gpio active state.
> +
> +  gpio-ranges:
> +    description: |
> +      Must reference itself, and provide a zero-based mapping for 37 pins.
> +    maxItems: 1
> +
> +  # Pin muxing and configuration
> +  realtek,drive-strength:
> +    $ref: /schemas/types.yaml#/definitions/uint32

Use the standard 'drive-strength' property.

> +    description: |
> +      Common drive strength used for all GPIO output pins, must be 4mA or 8mA.
> +      On reset, this value will default to 8mA.
> +    enum: [4, 8]
> +
> +  # LED scanning matrix
> +  leds:
> +    $ref: ../leds/realtek,rtl8231-leds.yaml#
> +
> +  # PWM output
> +  pwm:
> +    type: object
> +    description: |
> +      Subnode describing the PWM peripheral. To use the PWM output, gpio35 must
> +      be muxed to its 'pwm' function. Valid frequency values for consumers are
> +      1200, 1600, 2000, 2400, 2800, 3200, 4000, and 4800.
> +
> +    properties:
> +      "#pwm-cells":
> +        description: |
> +          Twos cells with PWM index (must be 0) and PWM frequency in Hz.
> +        const: 2
> +
> +    required:
> +      - "#pwm-cells"

Just move this to the parent node. No reason for a child node or that 1 
node can't be 2 providers.

> +
> +patternProperties:
> +  "-pins$":
> +    type: object
> +    $ref: ../pinctrl/pinmux-node.yaml#
> +
> +    properties:
> +      pins:
> +        items:
> +          oneOf:

No need for oneOf when there's only 1 entry.

> +            - enum: ["gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6",
> +                     "gpio7", "gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13",
> +                     "gpio14", "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20",
> +                     "gpio21", "gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27",
> +                     "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34",
> +                     "gpio35", "gpio36"]
> +        minItems: 1
> +        maxItems: 37
> +      function:
> +        description: |
> +          Select which function to use. "gpio" is supported for all pins, "led" is supported
> +          for pins 0-34, "pwm" is supported for for pin 35.
> +        enum: ["gpio", "led", "pwm"]
> +
> +    required:
> +      - pins
> +      - function
> +
> +required:
> +  - compatible
> +  - reg
> +  - gpio-controller
> +  - "#gpio-cells"
> +  - gpio-ranges
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    // Minimal example
> +    mdio {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        expander0: expander@0 {
> +            compatible = "realtek,rtl8231";
> +            reg = <0>;
> +
> +            gpio-controller;
> +            #gpio-cells = <2>;
> +            gpio-ranges = <&expander0 0 0 37>;
> +        };
> +    };
> +  - |
> +    // All bells and whistles included
> +    #include <dt-bindings/leds/common.h>
> +    mdio {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        expander1: expander@1 {
> +            compatible = "realtek,rtl8231";
> +            reg = <1>;
> +
> +            gpio-controller;
> +            #gpio-cells = <2>;
> +            gpio-ranges = <&expander1 0 0 37>;
> +
> +            realtek,drive-strength = <4>;
> +
> +            button-pins {
> +                pins = "gpio36";
> +                function = "gpio";
> +                input-debounce = "100000";
> +            };
> +
> +            pwm-pins {
> +                pins = "gpio35";
> +                function = "pwm";
> +            };
> +
> +            led-pins {
> +                pins = "gpio0", "gpio1", "gpio3", "gpio4";
> +                function = "led";
> +            };
> +
> +            pwm {
> +                #pwm-cells = <2>;
> +            };
> +
> +            leds {
> +                compatible = "realtek,rtl8231-leds";
> +                #address-cells = <2>;
> +                #size-cells = <0>;
> +
> +                realtek,led-scan-mode = "single-color";
> +
> +                led@0,0 {
> +                    reg = <0 0>;
> +                    color = <LED_COLOR_ID_GREEN>;
> +                    function = LED_FUNCTION_LAN;
> +                    function-enumerator = <0>;
> +                };
> +
> +                led@0,1 {
> +                    reg = <0 1>;
> +                    color = <LED_COLOR_ID_AMBER>;
> +                    function = LED_FUNCTION_LAN;
> +                    function-enumerator = <0>;
> +                };
> +
> +                led@1,0 {
> +                    reg = <1 0>;
> +                    color = <LED_COLOR_ID_GREEN>;
> +                    function = LED_FUNCTION_LAN;
> +                    function-enumerator = <1>;
> +                };
> +
> +                led@1,1 {
> +                    reg = <1 1>;
> +                    color = <LED_COLOR_ID_AMBER>;
> +                    function = LED_FUNCTION_LAN;
> +                    function-enumerator = <1>;
> +                };
> +            };
> +        };
> +    };
> -- 
> 2.31.1
>