Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751482AbWJ1BFG (ORCPT ); Fri, 27 Oct 2006 21:05:06 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751485AbWJ1BFG (ORCPT ); Fri, 27 Oct 2006 21:05:06 -0400 Received: from wx-out-0506.google.com ([66.249.82.228]:52490 "EHLO wx-out-0506.google.com") by vger.kernel.org with ESMTP id S1751482AbWJ1BFC (ORCPT ); Fri, 27 Oct 2006 21:05:02 -0400 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=tUQTmWlz/XvKFC3s8qARw0U3/W7euuz8/Titnkq1E3dial4kImPqzYtqLnx3BCDocwUkf2Q6uIM+ie0xf1W01bLeTBfxW/Dwm/YbJsIA/ULdUqcWkOVA0T3PWP90XAQ9WSDAcrVzZ1YogJXeD2ivG1BBk4Ge7Vgewgkew1QySRc= Message-ID: Date: Sat, 28 Oct 2006 09:05:01 +0800 From: "Jeff Chua" To: "Adrian Bunk" Subject: Re: linux-2.6.19-rc2 tg3 problem Cc: linux-kernel@vger.kernel.org, "David Miller" In-Reply-To: <20061027203109.GZ27968@stusta.de> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <20061025013022.GG27968@stusta.de> <20061026152455.GI27968@stusta.de> <20061027203109.GZ27968@stusta.de> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 27644 Lines: 652 On 10/28/06, Adrian Bunk wrote: > That's still pretty terse... > If there is anything interesting in the dmesg, it's above this point > (Please send complete "dmesg -s 1000000" for both cases). The working one (2.6.18) ... Linux version 2.6.18 (root@indiana.corp.fedex.com) (gcc version 3.4.5) #3 SMP PR EEMPT Fri Oct 27 14:39:13 SGT 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000df686c00 (usable) BIOS-e820: 00000000df686c00 - 00000000df688c00 (ACPI NVS) BIOS-e820: 00000000df688c00 - 00000000df68ac00 (ACPI data) BIOS-e820: 00000000df68ac00 - 00000000e0000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 2678MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000fe710 On node 0 totalpages: 915078 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 685702 pages, LIFO batch:31 DMI 2.3 present. ACPI: RSDP (v002 DELL ) @ 0x000feb00 ACPI: XSDT (v001 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd253 ACPI: FADT (v003 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd34b ACPI: SSDT (v001 DELL st_ex 0x00001000 INTL 0x20050309) @ 0xfffd6996 ACPI: MADT (v001 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd43f ACPI: BOOT (v001 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd4b1 ACPI: ASF! (v016 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd4d9 ACPI: MCFG (v001 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd540 ACPI: HPET (v001 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd57e ACPI: SSDT (v001 DpgPmm Cpu0Ist 0x00000011 INTL 0x20050309) @ 0xdf686c40 ACPI: SSDT (v001 DpgPmm Cpu1Ist 0x00000011 INTL 0x20050309) @ 0xdf687049 ACPI: SSDT (v001 DpgPmm CpuPm 0x00000010 INTL 0x20050309) @ 0xdf687452 ACPI: DSDT (v001 DELL dt_ex 0x00001000 INTL 0x20050309) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled) ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at e1000000 (gap: e0000000:10000000) Detected 2992.720 MHz processor. Built 1 zonelists. Total pages: 915078 Kernel command line: BOOT_IMAGE=(hd0,1)/linux/bzc1 root=/dev/sda2 resume=/dev/sd a3 pci=routeirq ata2=noprobe mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 3626308k/3660312k available (2077k kernel code, 32932k reserved, 816k da ta, 184k init, 2742808k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Using HPET for base-timer Calibrating delay using timer specific routine.. 5990.39 BogoMIPS (lpj=11980799) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000001 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 0 0000000 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000649d 0000000 0 00000001 Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20060707 CPU0: Intel(R) Pentium(R) D CPU 3.00GHz stepping 07 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5985.38 BogoMIPS (lpj=11970772) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000001 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 0 0000000 00000001 monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000649d 0000000 0 00000001 Total of 2 processors activated (11975.78 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=325 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Boot video device is 0000:00:02.0 PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15) ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 10 devices SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 18 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 19 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20 ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 21 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 18 ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 23 (level, low) -> IRQ 21 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 22 ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17 ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 NET: Registered protocol family 23 pnp: 00:01: ioport range 0x800-0x85f could not be reserved pnp: 00:01: ioport range 0xc00-0xc7f has been reserved pnp: 00:01: ioport range 0x860-0x8ff has been reserved pnp: 00:09: ioport range 0x100-0x1fe has been reserved pnp: 00:09: ioport range 0x200-0x277 has been reserved pnp: 00:09: ioport range 0x280-0x2e7 has been reserved pnp: 00:09: ioport range 0x2f0-0x2f7 has been reserved pnp: 00:09: ioport range 0x300-0x377 has been reserved pnp: 00:09: ioport range 0x380-0x3bb has been reserved pnp: 00:09: ioport range 0x3c0-0x3e7 could not be reserved pnp: 00:09: ioport range 0x3f6-0x3f7 has been reserved PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: fe900000-fe9fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: fe800000-fe8fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: disabled. MEM window: fe700000-fe7fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 262144 (order: 9, 3145728 bytes) TCP bind hash table entries: 65536 (order: 7, 786432 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered Simple Boot Flag at 0x7a set to 0x1 apm: disabled - APM is not SMP safe. highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [VBTN] ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not pres ent [20060707] ACPI: Getting cpuindex for acpiid 0x3 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not pres ent [20060707] ACPI: Getting cpuindex for acpiid 0x4 ibm_acpi: ec object not found Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 945G Chipset. agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xe0000000 [drm] Initialized drm 1.0.1 20051102 RAMDISK driver initialized: 16 RAM disks of 20480K size 1024 blocksize loop: loaded (max 8 devices) HP CISS Driver (v 3.6.10) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH7: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 ICH7: chipset revision 1 ICH7: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio Probing IDE interface ide0... hda: HL-DT-ST DVD+/-RW GWA4164B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006) megasas: 00.00.03.01 Sun May 14 22:49:52 PDT 2006 libata version 2.00 loaded. ata_piix 0000:00:1f.2: version 2.00 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEA0 irq 22 ata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEA8 irq 22 scsi0 : ata_piix ata1.00: ATA-7, max UDMA/133, 488281250 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 8 ata1.01: ATA-7, max UDMA/133, 488281250 sectors: LBA48 NCQ (depth 0/32) ata1.01: ata1: dev 1 multi count 8 ata1.00: configured for UDMA/133 ata1.01: configured for UDMA/133 scsi1 : ata_piix ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: SRST failed (status 0xFF) ata2: SRST failed (err_mask=0x100) ata2: softreset failed, retrying in 5 secs ata2: SRST failed (status 0xFF) ata2: SRST failed (err_mask=0x100) ata2: softreset failed, retrying in 5 secs ata2: SRST failed (status 0xFF) ata2: SRST failed (err_mask=0x100) ata2: reset failed, giving up Vendor: ATA Model: WDC WD2500JS-75N Rev: 10.0 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: WDC WD2500JS-75N Rev: 10.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 488281250 512-byte hdwr sectors (250000 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 488281250 512-byte hdwr sectors (250000 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda 14 sda15 > sd 0:0:0:0: Attached scsi disk sda SCSI device sdb: 488281250 512-byte hdwr sectors (250000 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back SCSI device sdb: 488281250 512-byte hdwr sectors (250000 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back sdb: sd 0:0:1:0: Attached scsi disk sdb usbmon: debugfs is not available ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 18, io mem 0xffa80800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000ff80 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ff60 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000ff40 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 21, io base 0x0000ff20 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 4-1: new low speed USB device using uhci_hcd and address 2 usb 4-1: configuration #1 chosen from 1 choice usb 4-2: new low speed USB device using uhci_hcd and address 3 usb 4-2: configuration #1 chosen from 1 choice usbcore: registered new driver hiddev input: Dell Dell USB Keyboard as /class/input/input0 input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.2-1 input: USB Optical Mouse as /class/input/input1 input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.2-2 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com EDAC MC: Ver: 2.0.1 Oct 27 2006 TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Starting balanced_irq Using IPI No-Shortcut mode Time: tsc clocksource has been installed. ACPI: (supports S0 S1 S3 S4 S5) VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 184k freed Adding 7823644k swap on /dev/sda3. Priority:-1 extents:1 across:7823644k tg3.c:v3.65 (August 07, 2006) ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:02:00.0 to 64 eth0: Tigon3 [partno(BCM5751PKFBG) rev 4001 PHY(5750)] (PCI Express) 10/100/1000 BaseT Ethernet 00:13:72:7b:2a:f0 eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] ip_tables: (C) 2000-2006 Netfilter Core Team ip_conntrack version 2.4 (8192 buckets, 65536 max) - 224 bytes per conntrack tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. The bad one (2.6.19-rc1) "diff" .. # diff dmesg-2.6.18 dmesg-2.6.19-rc1 1c1 < Linux version 2.6.18 (root@indiana.corp.fedex.com) (gcc version 3.4.5) #3 SMP PREEMPT Fri Oct 27 14:39:13 SGT 2006 --- > Linux version 2.6.19-rc1 (root@indiana.corp.fedex.com) (gcc version 3.4.5) #1 SMP PREEMPT Fri Oct 27 15:43:45 SGT 2006 16a17,23 > Entering add_active_range(0, 0, 915078) 0 entries of 256 used > Zone PFN ranges: > DMA 0 -> 4096 > Normal 4096 -> 229376 > HighMem 229376 -> 915078 > early_node_map[1] active PFN ranges > 0: 0 -> 915078 18,20c25,31 < DMA zone: 4096 pages, LIFO batch:0 < Normal zone: 225280 pages, LIFO batch:31 < HighMem zone: 685702 pages, LIFO batch:31 --- > DMA zone: 32 pages used for memmap > DMA zone: 0 pages reserved > DMA zone: 4064 pages, LIFO batch:0 > Normal zone: 1760 pages used for memmap > Normal zone: 223520 pages, LIFO batch:31 > HighMem zone: 5357 pages used for memmap > HighMem zone: 680345 pages, LIFO batch:31 55,56c66,67 < Detected 2992.720 MHz processor. < Built 1 zonelists. Total pages: 915078 --- > Detected 2992.858 MHz processor. > Built 1 zonelists. Total pages: 907929 67c78,86 < Memory: 3626308k/3660312k available (2077k kernel code, 32932k reserved, 816k data, 184k init, 2742808k highmem) --- > Memory: 3626280k/3660312k available (2110k kernel code, 32960k reserved, 828k data, 184k init, 2742808k highmem) > virtual kernel memory layout: > fixmap : 0xfff4f000 - 0xfffff000 ( 704 kB) > pkmap : 0xff800000 - 0xffc00000 (4096 kB) > vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) > lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) > .init : 0xc03e5000 - 0xc0413000 ( 184 kB) > .data : 0xc030fab4 - 0xc03deab4 ( 828 kB) > .text : 0xc0100000 - 0xc030fab4 (2110 kB) 70c89 < Calibrating delay using timer specific routine.. 5990.39 BogoMIPS (lpj=11980799) --- > Calibrating delay using timer specific routine.. 5990.51 BogoMIPS (lpj=11981021) 73d91 < CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000001 89c107 < Calibrating delay using timer specific routine.. 5985.38 BogoMIPS (lpj=11970772) --- > Calibrating delay using timer specific routine.. 5985.38 BogoMIPS (lpj=11970761) 91d108 < CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000001 99c116 < Total of 2 processors activated (11975.78 BogoMIPS). --- > Total of 2 processors activated (11975.89 BogoMIPS). 104c121 < migration_cost=325 --- > migration_cost=327 134,135c151,153 < usbcore: registered new driver usbfs < usbcore: registered new driver hub --- > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb 151a170,179 > PCI: Cannot allocate resource region 8 of bridge 0000:00:01.0 > PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0 > PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1 > PCI: Cannot allocate resource region 0 of device 0000:00:02.0 > PCI: Cannot allocate resource region 3 of device 0000:00:02.0 > PCI: Cannot allocate resource region 0 of device 0000:00:02.1 > PCI: Cannot allocate resource region 0 of device 0000:00:1d.7 > PCI: Cannot allocate resource region 2 of device 0000:00:1e.2 > PCI: Cannot allocate resource region 3 of device 0000:00:1e.2 > PCI: Cannot allocate resource region 0 of device 0000:02:00.0 164a193,199 > PCI: Failed to allocate mem resource #8:100000@e1000000 for 0000:00:1c.0 > PCI: Failed to allocate mem resource #0:80000@e1000000 for 0000:00:02.0 > PCI: Failed to allocate mem resource #0:80000@e1000000 for 0000:00:02.1 > PCI: Failed to allocate mem resource #3:40000@e1000000 for 0000:00:02.0 > PCI: Failed to allocate mem resource #0:400@e1000000 for 0000:00:1d.7 > PCI: Failed to allocate mem resource #2:200@e1000000 for 0000:00:1e.2 > PCI: Failed to allocate mem resource #3:100@e1000000 for 0000:00:1e.2 167c202 < MEM window: fe900000-fe9fffff --- > MEM window: disabled. 168a204 > PCI: Failed to allocate mem resource #0:10000@0 for 0000:02:00.0 171c207 < MEM window: fe800000-fe8fffff --- > MEM window: disabled. 175c211 < MEM window: fe700000-fe7fffff --- > MEM window: disabled. 198d233< Initializing Cryptographic API 233c268 < megasas: 00.00.03.01 Sun May 14 22:49:52 PDT 2006 --- > megasas: 00.00.03.05 Mon Oct 02 11:21:32 PDT 2006 235c270 < ata_piix 0000:00:1f.2: version 2.00 --- > ata_piix 0000:00:1f.2: version 2.00ac6 249,250c284,285 < ata2: port is slow to respond, please be patient < ata2: port failed to respond (30 secs) --- > ata2: port is slow to respond, please be patient (Status 0xff) > ata2: port failed to respond (30 secs, Status 0xff) 260,263c295 < Vendor: ATA Model: WDC WD2500JS-75N Rev: 10.0 < Type: Direct-Access ANSI SCSI revision: 05 < Vendor: ATA Model: WDC WD2500JS-75N Rev: 10.0 < Type: Direct-Access ANSI SCSI revision: 05 --- > scsi 0:0:0:0: Direct-Access ATA WDC WD2500JS-75N 10.0 PQ: 0 ANSI: 5 273a306 > scsi 0:0:1:0: Direct-Access ATA WDC WD2500JS-75N 10.0 PQ: 0 ANSI: 5 286,295c319,321 < PCI: Setting latency timer of device 0000:00:1d.7 to 64 < ehci_hcd 0000:00:1d.7: EHCI Host Controller < ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 < ehci_hcd 0000:00:1d.7: debug port 1 < PCI: cache line size of 128 is not supported by device 0000:00:1d.7 < ehci_hcd 0000:00:1d.7: irq 18, io mem 0xffa80800 < ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 < usb usb1: configuration #1 chosen from 1 choice < hub 1-0:1.0: USB hub found < hub 1-0:1.0: 8 ports detected --- > ACPI: PCI interrupt for device 0000:00:1d.7 disabled > ehci_hcd 0000:00:1d.7: init 0000:00:1d.7 fail, -16 > ehci_hcd: probe of 0000:00:1d.7 failed with error -16 300c326 < uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 --- > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 302,304c328,330 < usb usb2: configuration #1 chosen from 1 choice < hub 2-0:1.0: USB hub found < hub 2-0:1.0: 2 ports detected --- > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 2 ports detected 308c334 < uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 --- > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 310,312c336,338 < usb usb3: configuration #1 chosen from 1 choice < hub 3-0:1.0: USB hub found < hub 3-0:1.0: 2 ports detected --- > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected 316c342 < uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 --- > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 318,320c344,346 < usb usb4: configuration #1 chosen from 1 choice < hub 4-0:1.0: USB hub found < hub 4-0:1.0: 2 ports detected --- > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected 324c350 < uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 --- > uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 326,333c352,359 < usb usb5: configuration #1 chosen from 1 choice < hub 5-0:1.0: USB hub found < hub 5-0:1.0: 2 ports detected < usb 4-1: new low speed USB device using uhci_hcd and address 2 < usb 4-1: configuration #1 chosen from 1 choice < usb 4-2: new low speed USB device using uhci_hcd and address 3 < usb 4-2: configuration #1 chosen from 1 choice < usbcore: registered new driver hiddev --- > usb usb4: configuration #1 chosen from 1 choice > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 2 ports detected > usb 3-1: new low speed USB device using uhci_hcd and address 2 > usb 3-1: configuration #1 chosen from 1 choice > usb 3-2: new low speed USB device using uhci_hcd and address 3 > usb 3-2: configuration #1 chosen from 1 choice > usbcore: registered new interface driver hiddev 338c364 < usbcore: registered new driver usbhid --- > usbcore: registered new interface driver usbhid 341d366 < serio: i8042 AUX port at 0x60,0x64 irq 12 342a368 > serio: i8042 AUX port at 0x60,0x64 irq 12 344c370 < device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com --- > device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com 346c372 < TCP bic registered --- > TCP cubic registered 356c382 < tg3.c:v3.65 (August 07, 2006) --- > tg3.c:v3.66 (September 23, 2006) 358,361c384,385 < PCI: Setting latency timer of device 0000:02:00.0 to 64 < eth0: Tigon3 [partno(BCM5751PKFBG) rev 4001 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:13:72:7b:2a:f0 < eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[1] < eth0: dma_rwctrl[76180000] dma_mask[64-bit] --- > tg3: Cannot find proper PCI device base address, aborting. > ACPI: PCI interrupt for device 0000:02:00.0 disabled 363,365c387 < ip_conntrack version 2.4 (8192 buckets, 65536 max) - 224 bytes per conntrack < tg3: eth0: Link is up at 100 Mbps, full duplex. < tg3: eth0: Flow control is on for TX and on for RX. --- > ip_conntrack version 2.4 (8192 buckets, 65536 max) - 228 bytes per conntrack > If this won't help, the next step will be to bisect for the commit that > broke it for you. Ok, let me know if the above doesn't help ... Thanks, Jeff. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/