Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
To:     Linux Doc Mailing List <linux-doc@vger.kernel.org>,
        Jonathan Corbet <corbet@lwn.net>
Cc:     Mauro Carvalho Chehab <mchehab+huawei@kernel.org>,
        "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>,
        Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
        Bartosz Golaszewski <bgolaszewski@baylibre.com>,
        Charles Keepax <ckeepax@opensource.cirrus.com>,
        Dan Williams <dan.j.williams@intel.com>,
        Drew Fustini <drew@beagleboard.org>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Heikki Krogerus <heikki.krogerus@linux.intel.com>,
        Lee Jones <lee.jones@linaro.org>,
        Linus Walleij <linus.walleij@linaro.org>,
        Randy Dunlap <rdunlap@infradead.org>,
        Richard Fitzgerald <rf@opensource.cirrus.com>,
        Saravana Kannan <saravanak@google.com>,
        alsa-devel@alsa-project.org, linux-gpio@vger.kernel.org,
        linux-kernel@vger.kernel.org, patches@opensource.cirrus.com
Subject: [PATCH 05/10] docs: update pin-control.rst references
Date:   Wed, 19 May 2021 10:51:42 +0200
Message-Id: <46ac2e918c7c4a4b701d54870f167b78466ec578.1621413933.git.mchehab+huawei@kernel.org>
In-Reply-To: <cover.1621413933.git.mchehab+huawei@kernel.org>
References: <cover.1621413933.git.mchehab+huawei@kernel.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: Mauro Carvalho Chehab <mchehab@kernel.org>
Precedence: bulk

Changeset 5513b411ea5b ("Documentation: rename pinctl to pin-control")
renamed: Documentation/driver-api/pinctl.rst
to: Documentation/driver-api/pin-control.rst.

Update the cross-references accordingly.

Fixes: 5513b411ea5b ("Documentation: rename pinctl to pin-control")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 include/linux/device.h                  | 2 +-
 include/linux/mfd/madera/pdata.h        | 2 +-
 include/linux/pinctrl/pinconf-generic.h | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/include/linux/device.h b/include/linux/device.h
index 38a2071cf776..d1183cfdc8fb 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -399,7 +399,7 @@ struct dev_links_info {
  * 		along with subsystem-level and driver-level callbacks.
  * @em_pd:	device's energy model performance domain
  * @pins:	For device pin management.
- *		See Documentation/driver-api/pinctl.rst for details.
+ *		See Documentation/driver-api/pin-control.rst for details.
  * @msi_list:	Hosts MSI descriptors
  * @msi_domain: The generic MSI domain this device is using.
  * @numa_node:	NUMA node this device is close to.
diff --git a/include/linux/mfd/madera/pdata.h b/include/linux/mfd/madera/pdata.h
index 601cbbc10370..32e3470708ed 100644
--- a/include/linux/mfd/madera/pdata.h
+++ b/include/linux/mfd/madera/pdata.h
@@ -31,7 +31,7 @@ struct pinctrl_map;
  * @irq_flags:	    Mode for primary IRQ (defaults to active low)
  * @gpio_base:	    Base GPIO number
  * @gpio_configs:   Array of GPIO configurations (See
- *		    Documentation/driver-api/pinctl.rst)
+ *		    Documentation/driver-api/pin-control.rst)
  * @n_gpio_configs: Number of entries in gpio_configs
  * @gpsw:	    General purpose switch mode setting. Depends on the external
  *		    hardware connected to the switch. (See the SW1_MODE field
diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h
index e18ab3d5908f..5a96602a3316 100644
--- a/include/linux/pinctrl/pinconf-generic.h
+++ b/include/linux/pinctrl/pinconf-generic.h
@@ -89,7 +89,7 @@ struct pinctrl_map;
  * 	it.
  * @PIN_CONFIG_OUTPUT: this will configure the pin as an output and drive a
  * 	value on the line. Use argument 1 to indicate high level, argument 0 to
- *	indicate low level. (Please see Documentation/driver-api/pinctl.rst,
+ *	indicate low level. (Please see Documentation/driver-api/pin-control.rst,
  *	section "GPIO mode pitfalls" for a discussion around this parameter.)
  * @PIN_CONFIG_PERSIST_STATE: retain pin state across sleep or controller reset
  * @PIN_CONFIG_POWER_SOURCE: if the pin can select between different power
-- 
2.31.1