Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Jamin Lin <jamin_lin@aspeedtech.com>
To:     Rob Herring <robh+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
        "Andrew Jeffery" <andrew@aj.id.au>,
        Brendan Higgins <brendanhiggins@google.com>,
        Benjamin Herrenschmidt <benh@kernel.crashing.org>,
        Rayn Chen <rayn_chen@aspeedtech.com>,
        "open list:I2C SUBSYSTEM HOST DRIVERS" <linux-i2c@vger.kernel.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@vger.kernel.org>,
        "moderated list:ARM/ASPEED MACHINE SUPPORT" 
        <linux-arm-kernel@lists.infradead.org>,
        "moderated list:ARM/ASPEED MACHINE SUPPORT" 
        <linux-aspeed@lists.ozlabs.org>,
        open list <linux-kernel@vger.kernel.org>,
        "moderated list:ARM/ASPEED I2C DRIVER" <openbmc@lists.ozlabs.org>
CC:     <ryan_chen@aspeedtech.com>, <chiawei_wang@aspeedtech.com>,
        <troy_lee@aspeedtech.com>, <steven_lee@aspeedtech.com>,
        <jamin_lin@aspeedtech.com>
Subject: [PATCH 2/3] ARM: dts: aspeed: Add node for AST2600 I2C
Date:   Wed, 19 May 2021 16:04:28 +0800
Message-ID: <20210519080436.18975-3-jamin_lin@aspeedtech.com>
In-Reply-To: <20210519080436.18975-1-jamin_lin@aspeedtech.com>
References: <20210519080436.18975-1-jamin_lin@aspeedtech.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

Add node to get the global register of i2c for AST2600.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
 arch/arm/boot/dts/aspeed-g6.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index f96607b7b4e2..998d55a16c5c 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -674,6 +674,14 @@
 #include "aspeed-g6-pinctrl.dtsi"
 
 &i2c {
+
+	i2c_gr: i2c-global-regs@0 {
+		compatible = "aspeed,ast2600-i2c-global", "syscon";
+		reg = <0x0 0x20>;
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+	};
+
 	i2c0: i2c-bus@80 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-- 
2.17.1