Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Dario Binacchi <dariobin@libero.it>
To:     linux-kernel@vger.kernel.org
Cc:     Dario Binacchi <dariobin@libero.it>,
        Tony Lindgren <tony@atomide.com>,
        Drew Fustini <drew@beagleboard.org>,
        Linus Walleij <linus.walleij@linaro.org>,
        Andy Shevchenko <andy.shevchenko@gmail.com>,
        Jonathan Corbet <corbet@lwn.net>, linux-doc@vger.kernel.org,
        linux-gpio@vger.kernel.org
Subject: [PATCH v3 1/3] docs/pinctrl: update `pins' description under debugfs
Date:   Thu, 20 May 2021 22:27:28 +0200
Message-Id: <20210520202730.4444-2-dariobin@libero.it>
In-Reply-To: <20210520202730.4444-1-dariobin@libero.it>
References: <20210520202730.4444-1-dariobin@libero.it>
Precedence: bulk

Optionally the `pins' file created inside the `/sys/kernel/debug/pinctrl'
subdirectory of each pin controller device now allows you to set the
mux register of a pin.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
---

(no changes since v1)

 Documentation/driver-api/pin-control.rst | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/driver-api/pin-control.rst b/Documentation/driver-api/pin-control.rst
index e2474425fb0c..3d8192fa45a3 100644
--- a/Documentation/driver-api/pin-control.rst
+++ b/Documentation/driver-api/pin-control.rst
@@ -1447,6 +1447,9 @@ controller device containing these files:
 
 - ``pins``: prints a line for each pin registered on the pin controller. The
   pinctrl driver may add additional information such as register contents.
+  Optionally writes the mux register for the selected pin.
+  e.g. to write the value 0x73 in the mux register of pin 19:
+  echo 19 0x73 >/sys/kernel/debug/pinctrl/pins
 
 - ``gpio-ranges``: print ranges that map gpio lines to pins on the controller
 
-- 
2.17.1