Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Subject: Re: [PATCH v4] net: phy: add driver for Motorcomm yt8511 phy
From:   patchwork-bot+netdevbpf@kernel.org
Message-Id: <162162901054.11427.16053858331878438071.git-patchwork-notify@kernel.org>
Date:   Fri, 21 May 2021 20:30:10 +0000
References: <20210520163230.3788942-1-pgwipeout@gmail.com>
In-Reply-To: <20210520163230.3788942-1-pgwipeout@gmail.com>
To:     Peter Geis <pgwipeout@gmail.com>
Cc:     andrew@lunn.ch, hkallweit1@gmail.com, linux@armlinux.org.uk,
        davem@davemloft.net, kuba@kernel.org, linux-kernel@vger.kernel.org,
        netdev@vger.kernel.org, linux-rockchip@lists.infradead.org
Precedence: bulk

Hello:

This patch was applied to netdev/net-next.git (refs/heads/master):

On Thu, 20 May 2021 12:32:30 -0400 you wrote:
> Add a driver for the Motorcomm yt8511 phy that will be used in the
> production Pine64 rk3566-quartz64 development board.
> It supports gigabit transfer speeds, rgmii, and 125mhz clk output.
> 
> Signed-off-by: Peter Geis <pgwipeout@gmail.com>
> ---
> Changes v4:
> - Set fast ethernet delays as well
> - Use __phy_modify for delay setting
> - Enable PLL in sleep instead of disabling sleep
> - Don't set genphy functions that are defaults
> - Tested downshift and duplex detection
> 
> [...]

Here is the summary with links:
  - [v4] net: phy: add driver for Motorcomm yt8511 phy
    https://git.kernel.org/netdev/net-next/c/48e8c6f1612b

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html