Received: by 2002:a05:6a10:206:0:0:0:0 with SMTP id 6csp1967037pxj; Sat, 22 May 2021 07:07:10 -0700 (PDT) X-Google-Smtp-Source: ABdhPJxKwBqF8FA013tHleSKt+2w+SZgMgMthPPIDdiKepnST6oWFjia2WbfnGOKFJCXB1POoLvN X-Received: by 2002:aa7:d9d0:: with SMTP id v16mr16611547eds.293.1621692429978; Sat, 22 May 2021 07:07:09 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1621692429; cv=none; d=google.com; s=arc-20160816; b=u6991UXIanwNmYn3qNthKAPxUejppQCe7o5g+rUaFXhOwH8PU+5BvEqq5Uw/L+Uurn kvrbhyxYRWTFdeo3LDG9QfgwS8VS2i81m9/TO+9P3gSrkracGU9/7Y/QqmqQHn2PvOkR WQL6SVNaSSj/Ox8NkOMRiFIj40cT3tcmkZ6Y/Ke8OBm4E4nAToKGO+9HyR2N5qkgHgTA jly+ehpqaX5DXrhWubJRmFiOSkb83zbGKKsAQJbA3r2/bWtIy2nWXA29QMiXWto9GK7a Zg/Zri6KVEX/BhnU9XcFBVYV+kaVkF9M8d3TyeoNxxZHpc4rzF5ai6J+aGh3QIZFjRcf T15g== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:user-agent:in-reply-to:content-transfer-encoding :content-disposition:mime-version:references:message-id:subject:cc :to:from:date:dkim-signature; bh=7HRgIFQPUP56MKuO8AUNS9V7iufeOnWcpnwjXW4YiDg=; b=GoIbdN3uHJIsTK10VALxuAew97rjnb4YVwwsTTM7PEVew7a+OerQFvc2v6V88DCXQF CbPLyCuVF07eMzxdGExFn5Z0O2KW2TJEhskp9pmwB2XZkCpcZs08JK3tW7ZlOBBHKL7S JIgUCD5wexj5F6eXEqiv44pvlW0f4sKwXAXKMXQfKXtLeG/n09lE94p5GEPKQRKS4Y4q hWkHui0jgOn7Wwm83yViffhASAuTsi8SfFioTtL8hadb+6lZWiWxKCgLj/kdSY2as2dd 9uyEbHGSWUnceVXdUUV/QNZwdRImkHQXjbA1Is0vfLfLOliPPvNQZ1EuJpk5KUx0KjQH UUgg== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@kernel.org header.s=k20201202 header.b=RZvhOMVE; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=kernel.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id t18si7702176eju.604.2021.05.22.07.06.45; Sat, 22 May 2021 07:07:09 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; dkim=pass header.i=@kernel.org header.s=k20201202 header.b=RZvhOMVE; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231142AbhEVOFv (ORCPT + 99 others); Sat, 22 May 2021 10:05:51 -0400 Received: from mail.kernel.org ([198.145.29.99]:46726 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230301AbhEVOFu (ORCPT ); Sat, 22 May 2021 10:05:50 -0400 Received: by mail.kernel.org (Postfix) with ESMTPSA id 46EE161164; Sat, 22 May 2021 14:04:18 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1621692262; bh=RzG7rXSfCiMQoKs6IyW9Xa43Cw7RMz3iXDYHbLHmoGs=; h=Date:From:To:Cc:Subject:References:In-Reply-To:From; b=RZvhOMVEZ4ellYIdvEM8bpzjYn5Hf1Pm5+Ar8RYBMjkBW/qYZgh8TZFFZs+LETGuV ttH4p/mO6dBpNaWkxLuh6sox011Pb1siv6Nt6VfKRXG9KJljiQMBFcxrJbWj5eldeS 7uazWlSZT5dCZ6MoCNth07O+72sH1z5kOJ/qM21QrMVKMYM+rD7e13UNTc39Jf/RfK BbIIOP75z/Vn4LYrad3mo/PW+YSO7KHmVW16X5cEMeEBvM6oUB6+Jz5hUJkZgyWYbH ApOPXBCMhyNhsUUz8nFEA8Ni9yPXolLmoEezy6ck/G24RImneC+VRUWSsEW+Hkedgm nTmR6vyGf6MKw== Date: Sat, 22 May 2021 22:04:14 +0800 From: Shawn Guo To: Sebastian Reichel Cc: Philipp Zabel , Sascha Hauer , Pengutronix Kernel Team , Fabio Estevam , NXP Linux Team , Rob Herring , Alexandre Belloni , Alessandro Zummo , David Airlie , Daniel Vetter , Miquel Raynal , Saravana Kannan , devicetree@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-rtc@vger.kernel.org, linux-mtd@lists.infradead.org, kernel@collabora.com Subject: Re: [PATCHv2 5/5] ARM: dts: imx6: Add GE B1x5v2 Message-ID: <20210522140412.GC8194@dragon> References: <20210428222953.235280-1-sebastian.reichel@collabora.com> <20210428222953.235280-6-sebastian.reichel@collabora.com> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <20210428222953.235280-6-sebastian.reichel@collabora.com> User-Agent: Mutt/1.9.4 (2018-02-28) Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Thu, Apr 29, 2021 at 12:29:53AM +0200, Sebastian Reichel wrote: > This adds device tree files for the General Electric Healthcare > (GEHC) B1x5v2 series. All models make use of Congatec's QMX6 module, > which is described in its own device tree include, so that it can > also be used by other boards. > > Signed-off-by: Sebastian Reichel > --- > arch/arm/boot/dts/Makefile | 5 + > arch/arm/boot/dts/imx6dl-b105pv2.dts | 35 ++ > arch/arm/boot/dts/imx6dl-b105v2.dts | 35 ++ > arch/arm/boot/dts/imx6dl-b125pv2.dts | 33 ++ > arch/arm/boot/dts/imx6dl-b125v2.dts | 33 ++ > arch/arm/boot/dts/imx6dl-b155v2.dts | 36 ++ > arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi | 434 ++++++++++++++++++ > arch/arm/boot/dts/imx6dl-b1x5v2.dtsi | 61 +++ > arch/arm/boot/dts/imx6dl-qmx6.dtsi | 624 ++++++++++++++++++++++++++ > 9 files changed, 1296 insertions(+) > create mode 100644 arch/arm/boot/dts/imx6dl-b105pv2.dts > create mode 100644 arch/arm/boot/dts/imx6dl-b105v2.dts > create mode 100644 arch/arm/boot/dts/imx6dl-b125pv2.dts > create mode 100644 arch/arm/boot/dts/imx6dl-b125v2.dts > create mode 100644 arch/arm/boot/dts/imx6dl-b155v2.dts > create mode 100644 arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi > create mode 100644 arch/arm/boot/dts/imx6dl-b1x5v2.dtsi > create mode 100644 arch/arm/boot/dts/imx6dl-qmx6.dtsi > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index f8f09c5066e7..811f22ed1e37 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -515,6 +515,11 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ > imx6q-dms-ba16.dtb \ > imx6q-emcon-avari.dtb \ > imx6q-evi.dtb \ > + imx6dl-b105v2.dtb \ > + imx6dl-b105pv2.dtb \ 'p' goes before 'v'. > + imx6dl-b125v2.dtb \ > + imx6dl-b125pv2.dtb \ > + imx6dl-b155v2.dtb \ > imx6q-gk802.dtb \ > imx6q-gw51xx.dtb \ > imx6q-gw52xx.dtb \ > diff --git a/arch/arm/boot/dts/imx6dl-b105pv2.dts b/arch/arm/boot/dts/imx6dl-b105pv2.dts > new file mode 100644 > index 000000000000..0d5be2f9471f > --- /dev/null > +++ b/arch/arm/boot/dts/imx6dl-b105pv2.dts > @@ -0,0 +1,35 @@ > +// SPDX-License-Identifier: GPL-2.0 or MIT > +// > +// Device Tree Source for General Electric B105Pv2 > +// > +// Copyright 2018-2021 General Electric Company > +// Copyright 2018-2021 Collabora > + > +/dts-v1/; > +#include "imx6dl-b1x5pv2.dtsi" > + > +/ { > + model = "General Electric B105Pv2"; > + compatible = "ge,imx6dl-b105pv2", "congatec,qmx6", "fsl,imx6dl"; > + > + panel { > + compatible = "auo,g101evn010"; > + status = "okay"; Unneeded okay status. > + }; > +}; > + > +&i2c3 { > + touchscreen@41 { > + reg = <0x41>; We generally start property list with 'compatible'. > + compatible = "ilitek,ili251x"; > + In general, we do not use newline in middle of property list. > + pinctrl-names = "default"; > + pinctrl-0 =<&pinctrl_q7_gpio0>; > + interrupt-parent = <&gpio5>; > + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; > + reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>; > + > + touchscreen-size-x = <1280>; > + touchscreen-size-y = <800>; > + }; > +}; > diff --git a/arch/arm/boot/dts/imx6dl-b105v2.dts b/arch/arm/boot/dts/imx6dl-b105v2.dts > new file mode 100644 > index 000000000000..72a085348304 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6dl-b105v2.dts > @@ -0,0 +1,35 @@ > +// SPDX-License-Identifier: GPL-2.0 or MIT > +// > +// Device Tree Source for General Electric B105v2 > +// > +// Copyright 2018-2021 General Electric Company > +// Copyright 2018-2021 Collabora > + > +/dts-v1/; > +#include "imx6dl-b1x5v2.dtsi" > + > +/ { > + model = "General Electric B105v2"; > + compatible = "ge,imx6dl-b105v2", "congatec,qmx6", "fsl,imx6dl"; > + > + panel { > + compatible = "auo,g101evn010"; > + status = "okay"; > + }; > +}; > + > +&i2c3 { > + touchscreen@41 { > + reg = <0x41>; > + compatible = "ilitek,ili251x"; > + > + pinctrl-names = "default"; > + pinctrl-0 =<&pinctrl_q7_gpio0>; > + interrupt-parent = <&gpio5>; > + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; > + reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>; > + > + touchscreen-size-x = <1280>; > + touchscreen-size-y = <800>; > + }; > +}; > diff --git a/arch/arm/boot/dts/imx6dl-b125pv2.dts b/arch/arm/boot/dts/imx6dl-b125pv2.dts > new file mode 100644 > index 000000000000..8fd6c8ed6750 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6dl-b125pv2.dts > @@ -0,0 +1,33 @@ > +// SPDX-License-Identifier: GPL-2.0 or MIT > +// > +// Device Tree Source for General Electric B125Pv2 > +// > +// Copyright 2018-2021 General Electric Company > +// Copyright 2018-2021 Collabora > + > +/dts-v1/; > +#include "imx6dl-b1x5pv2.dtsi" > + > +/ { > + model = "General Electric B125Pv2"; > + compatible = "ge,imx6dl-b125pv2", "congatec,qmx6", "fsl,imx6dl"; > + > + panel { > + compatible = "auo,g121ean01"; > + status = "okay"; > + }; > +}; > + > +&i2c3 { > + touchscreen@2a { > + reg = <0x2a>; > + compatible = "eeti,exc80h60"; > + > + pinctrl-names = "default"; > + pinctrl-0 =<&pinctrl_q7_gpio0>; > + interrupt-parent = <&gpio5>; > + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; > + > + reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>; > + }; > +}; > diff --git a/arch/arm/boot/dts/imx6dl-b125v2.dts b/arch/arm/boot/dts/imx6dl-b125v2.dts > new file mode 100644 > index 000000000000..eb26ffde9f72 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6dl-b125v2.dts > @@ -0,0 +1,33 @@ > +// SPDX-License-Identifier: GPL-2.0 or MIT > +// > +// Device Tree Source for General Electric B125v2 > +// > +// Copyright 2018-2021 General Electric Company > +// Copyright 2018-2021 Collabora > + > +/dts-v1/; > +#include "imx6dl-b1x5v2.dtsi" > + > +/ { > + model = "General Electric B125v2"; > + compatible = "ge,imx6dl-b125v2", "congatec,qmx6", "fsl,imx6dl"; > + > + panel { > + compatible = "auo,g121ean01"; > + status = "okay"; > + }; > +}; > + > +&i2c3 { > + touchscreen@2a { > + reg = <0x2a>; > + compatible = "eeti,exc80h60"; > + > + pinctrl-names = "default"; > + pinctrl-0 =<&pinctrl_q7_gpio0>; > + interrupt-parent = <&gpio5>; > + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; > + > + reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>; > + }; > +}; > diff --git a/arch/arm/boot/dts/imx6dl-b155v2.dts b/arch/arm/boot/dts/imx6dl-b155v2.dts > new file mode 100644 > index 000000000000..620cd6f9da82 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6dl-b155v2.dts > @@ -0,0 +1,36 @@ > +// SPDX-License-Identifier: GPL-2.0 or MIT > +// > +// Device Tree Source for General Electric B155v2 > +// > +// Copyright 2018-2021 General Electric Company > +// Copyright 2018-2021 Collabora > + > +/dts-v1/; > +#include "imx6dl-b1x5v2.dtsi" > + > +/ { > + model = "General Electric B155v2"; > + compatible = "ge,imx6dl-b155v2", "congatec,qmx6", "fsl,imx6dl"; > + > + panel { > + compatible = "auo,g156xtn01"; > + status = "okay"; > + }; > +}; > + > +&i2c3 { > + touchscreen@2a { > + reg = <0x2a>; > + compatible = "eeti,exc80h84"; > + > + pinctrl-names = "default"; > + pinctrl-0 =<&pinctrl_q7_gpio0>; > + interrupt-parent = <&gpio5>; > + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; > + > + touchscreen-inverted-x; > + touchscreen-inverted-y; > + > + reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>; > + }; > +}; > diff --git a/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi b/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi > new file mode 100644 > index 000000000000..1f9e66e1afc0 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi > @@ -0,0 +1,434 @@ > +// SPDX-License-Identifier: GPL-2.0 or MIT > +// > +// Device Tree Source for General Electric B1x5v2 > +// > +// Copyright 2018-2021 General Electric Company > +// Copyright 2018-2021 Collabora > + > +#include > +#include "imx6dl-qmx6.dtsi" > + > +/ { > + chosen { > + stdout-path = &uart3; > + }; > + > + /* Do not allow frequencies above 800MHz */ > + cpus { > + cpu@0 { > + operating-points = < > + /* kHz uV */ > + 792000 1175000 > + 396000 1150000 > + >; > + fsl,soc-operating-points = < > + /* ARM kHz SOC-PU uV */ > + 792000 1175000 > + 396000 1175000 > + >; > + }; > + > + cpu@1 { > + operating-points = < > + /* kHz uV */ > + 792000 1175000 > + 396000 1150000 > + >; > + fsl,soc-operating-points = < > + /* ARM kHz SOC-PU uV */ > + 792000 1175000 > + 396000 1175000 > + >; > + }; > + }; > + > + reg_syspwr: regulator-12v { > + compatible = "regulator-fixed"; > + regulator-name = "SYS_PWR"; > + regulator-min-microvolt = <12000000>; > + regulator-max-microvolt = <12000000>; > + regulator-always-on; always-on is meaningless for a regulator that doesn't have on/off control. > + }; > + > + reg_5v_pmc: regulator-5v-pmc { > + compatible = "regulator-fixed"; > + regulator-name = "5V PMC"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-always-on; > + vin-supply = <®_syspwr>; > + }; > + > + reg_5v: regulator-5v { > + compatible = "regulator-fixed"; > + regulator-name = "5V"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-always-on; > + vin-supply = <®_syspwr>; > + }; > + > + reg_3v3: regulator-3v3 { > + compatible = "regulator-fixed"; > + regulator-name = "3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + vin-supply = <®_syspwr>; > + }; > + > + reg_5v0_audio: regulator-5v0-audio { > + compatible = "regulator-fixed"; > + regulator-name = "5V0_AUDIO"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <®_5v>; > + Unneeded newline. > + gpio = <&tca6424a 16 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + Ditto > + /* > + * This must be always-on for da7212, which has some not > + * properly documented dependencies for it's speaker supply > + * pin. The issue manifests as speaker volume being very low. > + */ > + regulator-always-on; > + }; > + > + > + reg_3v3_audio: regulator-3v3-audio { > + compatible = "regulator-fixed"; > + regulator-name = "3V3_AUDIO"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + vin-supply = <®_3v3>; > + > + pinctrl-0 = <&pinctrl_q7_hda_rst>; > + pinctrl-names = "default"; > + gpio = <&gpio6 8 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > + > + reg_2v5_audio: regulator-2v5-audio { > + compatible = "regulator-fixed"; > + regulator-name = "2V5_AUDIO"; > + regulator-min-microvolt = <2500000>; > + regulator-max-microvolt = <2500000>; > + regulator-always-on; > + vin-supply = <®_3v3_audio>; > + > + }; > + > + reg_wlan: regulator-wlan { > + compatible = "regulator-fixed"; > + regulator-name = "WLAN"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + vin-supply = <®_3v3>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_q7_sdio_pwr>; > + gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>; > + > + startup-delay-us = <70000>; > + enable-active-high; Put it right after GPIO_ACTIVE_HIGH line. > + }; > + > + reg_bl: regulator-backlight { > + compatible = "regulator-fixed"; > + regulator-name = "LED_VCC"; > + regulator-min-microvolt = <12000000>; > + regulator-max-microvolt = <12000000>; > + vin-supply = <®_syspwr>; > + > + pinctrl-0 = <&pinctrl_q7_lcd_power>; > + pinctrl-names = "default"; > + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > + > + reg_lcd: regulator-lcd { > + compatible = "regulator-fixed"; > + regulator-name = "LCD_5V"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <®_5v>; > + }; > + > + usb_power: regulator-usb-power { > + compatible = "regulator-fixed"; > + regulator-name = "USB POWER"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <®_5v>; > + }; > + > + charger: battery-charger { > + compatible = "gpio-charger"; /* ti,bq24172 */ > + > + charger-type = "mains"; > + gpios = <&tca6424a 3 GPIO_ACTIVE_LOW>; > + charge-current-limit-gpios = <&tca6424a 11 GPIO_ACTIVE_HIGH>, > + <&tca6424a 12 GPIO_ACTIVE_HIGH>; > + charge-current-limit-mapping = <1300000 0x0>, > + <700000 0x1>, > + <0 0x2>; > + > + charge-status-gpios = <&tca6424a 6 GPIO_ACTIVE_HIGH>; > + }; > + > + poweroff { > + compatible = "gpio-poweroff"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_q7_spi_cs1>; > + gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; > + }; > + > + power-button-key { > + compatible = "gpio-keys"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_q7_slp_btn>; > + > + power-button { > + label = "power button"; > + gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; > + linux,code = ; > + }; > + }; > + > + rotary-encoder-key { > + compatible = "gpio-keys"; > + > + rotary-encoder-press { > + label = "rotary-encoder press"; > + gpios = <&tca6424a 0 GPIO_ACTIVE_HIGH>; > + linux,code = ; > + linux,can-disable; > + }; > + }; > + > + rotary-encoder { > + compatible = "rotary-encoder"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_q7_gpio2 &pinctrl_q7_gpio4>; > + gpios = <&gpio4 26 GPIO_ACTIVE_LOW>, <&gpio1 0 GPIO_ACTIVE_LOW>; > + rotary-encoder,relative-axis; > + rotary-encoder,steps-per-period = <2>; > + wakeup-source; > + }; > + > + leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_q7_gpio1 &pinctrl_q7_gpio3 &pinctrl_q7_gpio5>; > + > + alarm1 { > + label = "alarm:red"; > + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; > + }; > + > + alarm2 { > + label = "alarm:yellow"; > + gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>; > + }; > + > + alarm3 { > + label = "alarm:blue"; > + gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>; > + }; > + }; > + > + backlight: backlight { > + compatible = "pwm-backlight"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_q7_backlight_enable>; > + power-supply = <®_bl>; > + pwms = <&pwm4 0 5000000 0>; > + brightness-levels = <0 255>; > + num-interpolated-steps = <255>; > + default-brightness-level = <179>; > + enable-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; > + status = "okay"; Unneeded okay status. > + }; > + > + panel { > + backlight = <&backlight>; > + power-supply = <®_lcd>; > + > + port { > + panel_in: endpoint { > + remote-endpoint = <&lvds0_out>; > + }; > + }; > + }; > + > + sound { > + compatible = "simple-audio-card"; > + simple-audio-card,name = "audio-card"; > + simple-audio-card,format = "i2s"; > + simple-audio-card,bitclock-master = <&dailink_master>; > + simple-audio-card,frame-master = <&dailink_master>; > + > + simple-audio-card,widgets = "Speaker", "Ext Spk"; > + simple-audio-card,audio-routing = "Ext Spk", "LINE"; > + > + simple-audio-card,cpu { > + sound-dai = <&ssi1>; > + }; > + > + dailink_master: simple-audio-card,codec { > + sound-dai = <&codec>; > + }; > + }; > + > + clk_ext_audio_codec: clock-codec { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <12288000>; > + }; > +}; > + > +&i2c1 { > + battery: battery@b { > + compatible = "ti,bq20z65", "sbs,sbs-battery"; > + reg = <0x0b>; > + > + sbs,battery-detect-gpios = <&tca6424a 5 GPIO_ACTIVE_LOW>; > + sbs,i2c-retry-count = <5>; > + > + power-supplies = <&charger>; > + }; > + > + codec: audio-codec@1a { > + compatible = "dlg,da7212"; > + reg = <0x1a>; > + #sound-dai-cells = <0>; > + VDDA-supply = <®_2v5_audio>; > + VDDSP-supply = <®_5v0_audio>; > + VDDMIC-supply = <®_3v3_audio>; > + VDDIO-supply = <®_3v3_audio>; > + clocks = <&clk_ext_audio_codec>; > + clock-names = "mclk"; > + }; > +}; > + > +&i2c5 { > + tmp75: temperature-sensor@48 { > + compatible = "ti,tmp75"; > + reg = <0x48>; > + vs-supply = <®_3v3>; > + interrupt-parent = <&tca6424a>; > + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; > + }; > + > + tca6424a: gpio-controller@22 { > + compatible = "ti,tca6424"; > + reg = <0x22>; > + gpio-controller; > + #gpio-cells = <2>; > + vcc-supply = <®_3v3>; > + > + interrupt-parent = <&gpio7>; > + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_q7_gpio6>; > + interrupt-controller; > + #interrupt-cells = <2>; > + > + gpio-line-names = "GPIO_ROTOR#", "ACM_IO_INT", "TMP_SENSOR_IRQ", "AC_IN", > + "TF_S", "BATT_T", "LED_INC_CHAR", "ACM1_OCF", > + "ACM2_OCF", "ACM_IO_RST", "USB1_POWER_EN", "EGPIO_CC_CTL0", > + "EGPIO_CC_CTL1", "12V_OEMNBP_EN", "CP2105_RST", "", > + "SPEAKER_PA_EN", "ARM7_UPI_RESET", "ARM7_PWR_RST", "NURSE_CALL", > + "MARKER_EN", "EGPIO_TOUCH_RST", "PRESSURE_INT1", "PRESSURE_INT2"; > + > + }; > +}; > + > +&fec { > + status = "okay"; > +}; > + > +&hdmi { > + status = "okay"; > +}; > + > +&audmux { Sort them alphabetically. > + status = "okay"; > +}; > + > +&ssi1 { > + fsl,mode = "i2s-slave"; > + status = "okay"; > +}; > + > +&usbotg { > + vbus-supply = <&usb_power>; > + disable-over-current; > + dr_mode = "host"; > + status = "okay"; > + > + /* > + * TPS2051BDGN fault-gpio is connected to Q7[86] USB_0_1_OC_N. > + * On QMX6 this is not connceted to the i.MX6, but to the USB Hub > + * from &usbh1. This means, that we cannot easily detect and handle > + * over-current events. Fortunately the regulator limits the current > + * automatically, so the hardware is still protected. > + */ > +}; > + > +&pwm4 { > + status = "okay"; > +}; > + > +&ldb { > + status = "okay"; > + > + lvds0: lvds-channel@0 { > + status = "okay"; We generally end property list with 'status'. > + fsl,data-mapping = "spwg"; > + fsl,data-width = <24>; > + > + port@4 { > + reg = <4>; Have a newline between property list and child node. > + lvds0_out: endpoint { > + remote-endpoint = <&panel_in>; > + }; > + }; > + }; > +}; > + > +&usdhc4 { > + /* WiFi module */ > + status = "okay"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc4>; > + > + bus-width = <4>; > + no-1-8-v; > + non-removable; > + wakeup-source; > + keep-power-in-suspend; > + cap-power-off-card; > + max-frequency = <25000000>; > + vmmc-supply = <®_wlan>; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + wlcore: wlcore@2 { > + compatible = "ti,wl1837"; > + reg = <2>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_q7_gpio7>; > + > + interrupt-parent = <&gpio4>; > + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; > + > + tcxo-clock-frequency = <26000000>; > + }; > + Unneeded newline. > +}; > diff --git a/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi b/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi > new file mode 100644 > index 000000000000..b4c6fbd802fb > --- /dev/null > +++ b/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi > @@ -0,0 +1,61 @@ > +// SPDX-License-Identifier: GPL-2.0 or MIT > +// > +// Device Tree Source for General Electric B1x5v2 > +// > +// Copyright 2018-2021 General Electric Company > +// Copyright 2018-2021 Collabora > + > +#include > +#include "imx6dl-b1x5pv2.dtsi" > + > +/ { > + reg_3v3_acm: regulator-3v3-acm { > + compatible = "regulator-fixed"; > + regulator-name = "3V3 ACM"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + vin-supply = <®_3v3>; > + }; > +}; > + > +&i2c1 { > + tca6416: gpio-controller@21 { > + compatible = "ti,tca6416"; > + reg = <0x21>; > + gpio-controller; > + #gpio-cells = <2>; > + vcc-supply = <®_3v3_acm>; > + > + /* > + * TCA6424 cannot handle low type interrupts at the moment and > + * it cannot be added without quite a few hacks. Since this > + * controller does not have any input type GPIOs, pretend that > + * the interrupt pin is unconnected. > + */ > + //interrupt-parent = <&tca6424a>; > + //interrupts = <1 IRQ_TYPE_LEVEL_LOW>; > + //interrupt-controller; > + //#interrupt-cells = <2>; Maintain commented code out-of-tree please. > + > + reset-gpios = <&tca6424a 9 GPIO_ACTIVE_LOW>; > + > + gpio-line-names = "ACM1_EN", "ACM1_CL0", "ACM1_CL1", "ACM1_CL2", > + "", "ACM2_EN", "ACM2_CL0", "ACM2_CL1", > + "ACM2_CL2", "", "", "", > + "", "", "", ""; > + }; > +}; > + > +&i2c5 { > + mpl3115a2: pressure-sensor@60 { > + compatible = "fsl,mpl3115"; > + reg = <0x60>; > + > + vcc-supply = <®_3v3_acm>; > + > + /* The MPL3115 binding does not yet support interrupts */ > + //interrupt-parent = <&tca6424a>; > + //interrupts = <22 IRQ_TYPE_EDGE_RISING 23 IRQ_TYPE_EDGE_RISING>; > + }; > +}; > diff --git a/arch/arm/boot/dts/imx6dl-qmx6.dtsi b/arch/arm/boot/dts/imx6dl-qmx6.dtsi > new file mode 100644 > index 000000000000..575dad47bf72 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6dl-qmx6.dtsi > @@ -0,0 +1,624 @@ > +// SPDX-License-Identifier: GPL-2.0 or MIT > +// > +// Device Tree Source for i.MX6DL based congatec QMX6 > +// > +// Copyright 2018-2021 General Electric Company > +// Copyright 2018-2021 Collabora > +// Copyright 2016 congatec AG > + > +#include "imx6dl.dtsi" > +#include > +#include > + > +/ { > + memory@10000000 { > + reg = <0x10000000 0x40000000>; > + }; > + > + reg_3p3v: 3p3v { > + compatible = "regulator-fixed"; > + regulator-name = "3P3V"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + i2cmux { > + compatible = "i2c-mux-gpio"; > + #address-cells = <1>; > + #size-cells = <0>; > + mux-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; > + i2c-parent = <&i2c2>; > + > + i2c5: i2c@0 { > + reg = <0>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + > + i2c6: i2c@1 { > + reg = <1>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + }; > +}; > + > +&ecspi1 { > + fsl,spi-num-chipselects = <1>; Is it supported? > + cs-gpios = <&gpio3 19 0>; Use define for polarity. > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_ecspi1>; > + status = "okay"; > + > + flash@0 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "sst,sst25vf032b", "jedec,spi-nor"; > + spi-max-frequency = <20000000>; > + reg = <0>; > + > + partition@0 { > + label = "bootloader"; > + reg = <0x0000000 0x100000>; > + }; > + > + partition@100000 { > + label = "user"; > + reg = <0x0100000 0x2fc000>; > + }; > + > + partition@3fc000 { > + label = "reserved"; > + reg = <0x03fc000 0x4000>; > + read-only; > + }; > + }; > +}; > + > +&fec { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_enet &pinctrl_phy_reset>; > + phy-mode = "rgmii-id"; > + phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; > + fsl,magic-packet; > + phy-handle = <&phy0>; > + > + mdio { > + #address-cells = <1>; > + #size-cells = <0>; > + > + phy0: ethernet-phy@6 { > + reg = <6>; > + qca,clk-out-frequency = <125000000>; > + }; > + }; > +}; > + > +&i2c6 { > + pmic@8 { > + compatible = "fsl,pfuze100"; > + reg = <0x08>; > + > + regulators { > + sw1a_reg: sw1ab { > + regulator-min-microvolt = <300000>; > + regulator-max-microvolt = <1875000>; > + regulator-boot-on; > + regulator-always-on; > + regulator-ramp-delay = <6250>; > + }; > + > + sw1c_reg: sw1c { > + regulator-min-microvolt = <300000>; > + regulator-max-microvolt = <1875000>; > + regulator-boot-on; > + regulator-always-on; > + regulator-ramp-delay = <6250>; > + }; > + > + sw2_reg: sw2 { > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + sw3a_reg: sw3a { > + regulator-min-microvolt = <400000>; > + regulator-max-microvolt = <1975000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + sw3b_reg: sw3b { > + regulator-min-microvolt = <400000>; > + regulator-max-microvolt = <1975000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + sw4_reg: sw4 { > + regulator-min-microvolt = <675000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + swbst_reg: swbst { > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5150000>; > + }; > + > + snvs_reg: vsnvs { > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <3000000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + vref_reg: vrefddr { > + regulator-boot-on; > + regulator-always-on; > + }; > + > + /* > + * keep VGEN3, VGEN4 and VGEN5 enabled in order to > + * maintain backward compatibility with hw-rev. A.0 > + */ > + vgen3_reg: vgen3 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + vgen4_reg: vgen4 { > + regulator-min-microvolt = <2500000>; > + regulator-max-microvolt = <2500000>; > + regulator-always-on; > + }; > + > + vgen5_reg: vgen5 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + /* supply voltage for eMMC */ > + vgen6_reg: vgen6 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + }; > + }; > +}; > + > +&pcie { > + reset-gpio = <&gpio1 20 0>; > +}; > + > +&audmux { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_audmux>; > + > + audmux_ssi1 { > + fsl,audmux-port = ; > + fsl,port-config = < > + (IMX_AUDMUX_V2_PTCR_TFSDIR | > + IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT6) | > + IMX_AUDMUX_V2_PTCR_TCLKDIR | > + IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT6) | > + IMX_AUDMUX_V2_PTCR_SYN) > + IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT6) > + >; > + }; > + > + audmux_aud6 { > + fsl,audmux-port = ; > + fsl,port-config = < > + IMX_AUDMUX_V2_PTCR_SYN > + IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0) > + >; > + }; > +}; > + > +&clks { > + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, > + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; > + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL2_PFD0_352M>, > + <&clks IMX6QDL_CLK_PLL2_PFD0_352M>; > +}; > + > +&i2c1 { > + clock-frequency = <100000>; > + pinctrl-names = "default", "gpio"; > + pinctrl-0 = <&pinctrl_i2c1>; > + pinctrl-1 = <&pinctrl_i2c1_gpio>; > + scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; > + sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; > + status = "okay"; > +}; > + > +&i2c2 { > + clock-frequency = <100000>; > + pinctrl-names = "default", "gpio"; > + pinctrl-0 = <&pinctrl_i2c2>; > + pinctrl-1 = <&pinctrl_i2c2_gpio>; > + scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; > + sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; > + status = "okay"; > +}; > + > +&i2c3 { > + clock-frequency = <100000>; > + pinctrl-names = "default", "gpio"; > + pinctrl-0 = <&pinctrl_i2c3>; > + pinctrl-1 = <&pinctrl_i2c3_gpio>; > + scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; > + sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; > + > + status = "okay"; > + > + rtc: m41t62@68 { > + compatible = "st,m41t62"; > + reg = <0x68>; > + > + rtc_sqw: clock { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <32768>; > + }; > + }; > +}; > + > +&clks { > + clocks = <&rtc_sqw>; > + clock-names = "ckil"; > +}; > + > +&pwm4 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm4>; > +}; > + > +®_arm { > + vin-supply = <&sw1a_reg>; > +}; > + > +®_pu { > + vin-supply = <&sw1c_reg>; > +}; > + > +®_soc { > + vin-supply = <&sw1c_reg>; > +}; > + > +&snvs_poweroff { > + status = "okay"; > +}; > + > +&uart2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart2>; > + status = "okay"; > +}; > + > +&uart3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart3>; > + status = "okay"; > +}; > + > +&usdhc2 { > + /* MicroSD card slot */ > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc2>; > + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; > + no-1-8-v; > + keep-power-in-suspend; > + wakeup-source; > + vmmc-supply = <®_3p3v>; > + status = "okay"; > +}; > + > +&usdhc3 { > + /* eMMC module */ > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc3>; > + non-removable; > + bus-width = <8>; > + no-1-8-v; > + keep-power-in-suspend; > + wakeup-source; > + vmmc-supply = <®_3p3v>; > + status = "okay"; > +}; > + > +&usbh1 { > + /* Connected to USB-Hub SMSC USB2514, provides P0, P2, P3, P4 on Qseven connector */ > + vbus-supply = <®_5v>; > + status = "okay"; > +}; > + > +&usbotg { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usbotg>; > +}; > + > +&wdog1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_wdog>; > + fsl,ext-reset-output; > +}; > + > +&iomuxc { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_hog>; > + > + qmx6mux: imx6qdl-qmx6 { > + }; What is this for? > +}; > + > +&qmx6mux { > + pinctrl_hog: hoggrp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* PCIE_WAKE_B */ > + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x80000000 /* I2C multiplexer */ > + MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x80000000 /* SD4_CD# */ > + MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x80000000 /* SD4_WP */ > + MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x80000000 /* Camera MCLK */ > + >; > + }; > + > + /* Watchdog output signal */ > + pinctrl_wdog: wdoggrp { Sort pinctrl nodes alphabetically. Shawn > + fsl,pins = < > + MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 > + >; > + }; > + > + pinctrl_q7_hda_rst: hdarstgrp { > + fsl,pins = < > + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x1b0b0 /* Q7[61] HDA_RST_N */ > + >; > + }; > + > + pinctrl_q7_backlight_enable: blengrp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 /* Q7[112] LVDS_BLEN */ > + >; > + }; > + > + pinctrl_audmux: audmuxgrp { > + fsl,pins = < > + MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x110b0 /* Q7[67] HDA_SDO */ > + MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x130b0 /* Q7[59] HDA_SYNC */ > + MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x130b0 /* Q7[65] HDA_SDI */ > + MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x130b0 /* Q7[63] HDA_BITCLK */ > + >; > + }; > + > + /* SPI bus does not leave System on Module */ > + pinctrl_ecspi1: ecspi1grp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 > + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 > + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 > + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 > + >; > + }; > + > + /* PHY is on System on Module, Q7[3-15] have Ethernet lines */ > + pinctrl_enet: enetgrp { > + fsl,pins = < > + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 > + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 > + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 > + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 > + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 > + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 > + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 > + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 > + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 > + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 > + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 > + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 > + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 > + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 > + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 > + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 > + >; > + }; > + > + /* RGMII Phy Reset */ > + pinctrl_phy_reset: phyrstgrp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0 > + >; > + }; > + > + pinctrl_i2c1: i2c1grp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 /* Q7[66] I2C_CLK */ > + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 /* Q7[68] I2C_DAT */ > + >; > + }; > + > + pinctrl_i2c1_gpio: i2c1gpiogrp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x1b0b0 /* Q7[66] I2C_CLK */ > + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x1b0b0 /* Q7[68] I2C_DAT */ > + >; > + }; > + > + > + pinctrl_i2c2: i2c2grp { > + fsl,pins = < > + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 /* Q7[152] SDVO_CTRL_CLK */ > + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 /* Q7[150] SDVO_CTRL_DAT */ > + >; > + }; > + > + pinctrl_i2c2_gpio: i2c2gpiogrp { > + fsl,pins = < > + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x1b0b0 /* Q7[152] SDVO_CTRL_CLK */ > + MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x1b0b0 /* Q7[150] SDVO_CTRL_DAT */ > + >; > + }; > + > + pinctrl_i2c3: i2c3grp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 /* Q7[60] SMB_CLK */ > + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 /* Q7[62] SMB_DAT */ > + >; > + }; > + > + pinctrl_i2c3_gpio: i2c3gpiogrp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x1b0b0 /* Q7[60] SMB_CLK */ > + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 /* Q7[62] SMB_DAT */ > + >; > + }; > + > + pinctrl_pwm4: pwm4grp { > + fsl,pins = < > + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 /* Q7[123] LVDS_BLT_CTRL */ > + >; > + }; > + > + /* Debug connector on Q7 module */ > + pinctrl_uart2: uart2grp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 > + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 > + >; > + }; > + > + pinctrl_uart3: uart3grp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 /* Q7[177] UART0_RX */ > + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 /* Q7[171] UART0_TX */ > + >; > + }; > + > + /* ?SD card slot on Q7 module */ > + pinctrl_usdhc2: usdhc2grp { > + fsl,pins = < > + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 > + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 > + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 > + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 > + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 > + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 > + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 /* SD2_CD */ > + >; > + }; > + > + /* eMMC module on Q7 module */ > + pinctrl_usdhc3: usdhc3grp { > + fsl,pins = < > + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 > + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 > + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 > + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 > + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 > + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 > + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 > + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 > + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 > + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 > + >; > + }; > + > + > + pinctrl_usdhc4: usdhc4grp { > + fsl,pins = < > + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 /* Q7[45] SDIO_CMD */ > + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x17059 /* Q7[42] SDIO_CLK */ > + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 /* Q7[48] SDIO_DAT1 */ > + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 /* Q7[49] SDIO_DAT0 */ > + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 /* Q7[50] SDIO_DAT3 */ > + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 /* Q7[51] SDIO_DAT2 */ > + >; > + }; > + > + pinctrl_q7_slp_btn: q7slpbtngrp { > + fsl,pins = < > + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 /* Q7[21] SLP_BTN# */ > + >; > + }; > + > + pinctrl_q7_sdio_pwr: q7sdiopwrgrp { > + fsl,pins = < > + MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0 /* Q7[47] SDIO_PWR# */ > + >; > + }; > + > + pinctrl_q7_gpio0: q7gpio0grp { > + fsl,pins = < > + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 /* Q7[185] GPIO0 */ > + >; > + }; > + > + pinctrl_q7_gpio1: q7gpio1grp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 /* Q7[186] GPIO1 */ > + >; > + }; > + > + pinctrl_q7_gpio2: q7gpio2grp { > + fsl,pins = < > + MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0 /* Q7[187] GPIO2 */ > + >; > + }; > + > + pinctrl_q7_gpio3: q7gpio3grp { > + fsl,pins = < > + MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x1b0b0 /* Q7[188] GPIO3 */ > + >; > + }; > + > + pinctrl_q7_gpio4: q7gpio4grp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* Q7[189] GPIO4 */ > + >; > + }; > + > + pinctrl_q7_gpio5: q7gpio5grp { > + fsl,pins = < > + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 /* Q7[190] GPIO5 */ > + >; > + }; > + > + pinctrl_q7_gpio6: q7gpio6grp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x1b0b0 /* Q7[191] GPIO6 */ > + >; > + }; > + > + pinctrl_q7_gpio7: q7gpio7grp { > + fsl,pins = < > + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* Q7[192] GPIO7 */ > + >; > + }; > + > + pinctrl_usbotg: usbotggrp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 /* Q7[92] USB_ID */ > + >; > + }; > + > + pinctrl_q7_lcd_power: lcdpwrgrp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 /* Q7[111] LVDS_PPEN */ > + >; > + }; > + > + pinctrl_q7_spi_cs1: spics1grp { > + fsl,pins = < > + MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x1b0b0 /* Q7[202] SPI_CS1# */ > + >; > + }; > +}; > -- > 2.30.2 >