Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Subject: Re: [PATCH RESEND] ARM: dts: imx6dl-yapp4: Configure the OLED display
 segment offset
To:     Shawn Guo <shawnguo@kernel.org>
Cc:     Rob Herring <robh+dt@kernel.org>,
        Fabio Estevam <festevam@gmail.com>, devicetree@vger.kernel.org,
        Sascha Hauer <s.hauer@pengutronix.de>,
        Pengutronix Kernel Team <kernel@pengutronix.de>,
        NXP Linux Team <linux-imx@nxp.com>,
        linux-kernel@vger.kernel.org
References: <1620813314-30803-1-git-send-email-michal.vokac@ysoft.com>
 <20210523034952.GU8194@dragon>
From:   =?UTF-8?B?TWljaGFsIFZva8OhxI0=?= <michal.vokac@ysoft.com>
Message-ID: <9add872f-0c98-3c11-ea1f-5349f0f0bed2@ysoft.com>
Date:   Mon, 24 May 2021 10:59:14 +0200
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101
 Thunderbird/78.8.1
MIME-Version: 1.0
In-Reply-To: <20210523034952.GU8194@dragon>
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Language: en-US
Content-Transfer-Encoding: 8bit
Precedence: bulk

On 23. 05. 21 5:49, Shawn Guo wrote:
> On Wed, May 12, 2021 at 11:55:14AM +0200, Michal Vokáč wrote:
>> The imx6dl-yapp4 platform uses a GE-LX012864FWPP3N0000 OLED display.
>> The display consist of a 128x64 OLED panel and a SSD1305 controller.
>>
>> The OLED panel resolution is 128x64 but the built-in controller default
>> resolution is 132x64. To display properly a segment offset needs to be
>> configured.
>>
>> Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
> 
> Why are you resending?  Please state reason when you resend.

I can't tell where but a while ago I read in some documentation
that if you do not get any response for aprox. two weeks you
can/should resend the patch in case it fell through the cracks.
I sent these patches in the middle of April, four weeks ago,
and have got no replies since then. So I [RESEND PATCH] these.

I totally understand that you, and all maintainers and reviewers
in general, are very busy so it may take a long time to reply.

AFAIK one does not need to state a reason for RESEND PATCH.
The word RESEND itself should explain the reason. This is not v2,
where I would of course describe what has changed.

Please correct me if my understanding of this part of the submitting
process is incorrect.

Thank you,
Michal