Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Aswath Govindraju <a-govindraju@ti.com>
CC:     Lokesh Vutla <lokeshvutla@ti.com>,
        Vignesh Raghavendra <vigneshr@ti.com>,
        Kishon Vijay Abraham I <kishon@ti.com>,
        Grygorii Strashko <grygorii.strashko@ti.com>,
        Aswath Govindraju <a-govindraju@ti.com>,
        Linus Walleij <linus.walleij@linaro.org>,
        Bartosz Golaszewski <bgolaszewski@baylibre.com>,
        Rob Herring <robh+dt@kernel.org>, Keerthy <j-keerthy@ti.com>,
        Sekhar Nori <nsekhar@ti.com>,
        David Lechner <david@lechnology.com>,
        <linux-gpio@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v3 1/2] ARM: dts: da850-lego-ev3: align GPIO hog names with dt-schema
Date:   Mon, 24 May 2021 20:49:53 +0530
Message-ID: <20210524151955.8008-2-a-govindraju@ti.com>
In-Reply-To: <20210524151955.8008-1-a-govindraju@ti.com>
References: <20210524151955.8008-1-a-govindraju@ti.com>
MIME-Version: 1.0
Content-Type: text/plain
To:     unlisted-recipients:; (no To-header on input)
Precedence: bulk

The GPIO hog dt-schema node naming convention expect GPIO hogs node names
to end with a 'hog' suffix.

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
---
 arch/arm/boot/dts/da850-lego-ev3.dts | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts
index afd04a423856..1e86cde86406 100644
--- a/arch/arm/boot/dts/da850-lego-ev3.dts
+++ b/arch/arm/boot/dts/da850-lego-ev3.dts
@@ -412,14 +412,14 @@
 	status = "okay";
 
 	/* Don't pull down battery voltage adc io channel */
-	batt_volt_en {
+	batt-volt-en-hog {
 		gpio-hog;
 		gpios = <6 GPIO_ACTIVE_HIGH>;
 		output-high;
 	};
 
 	/* Don't impede Bluetooth clock signal */
-	bt_clock_en {
+	bt-clock-en-hog {
 		gpio-hog;
 		gpios = <5 GPIO_ACTIVE_HIGH>;
 		input;
@@ -433,19 +433,19 @@
 	 * anything, but they are present in the source code from LEGO.
 	 */
 
-	bt_pic_en {
+	bt-pic-en-hog {
 		gpio-hog;
 		gpios = <51 GPIO_ACTIVE_HIGH>;
 		output-low;
 	};
 
-	bt_pic_rst {
+	bt-pic-rst-hog {
 		gpio-hog;
 		gpios = <78 GPIO_ACTIVE_HIGH>;
 		output-high;
 	};
 
-	bt_pic_cts {
+	bt-pic-cts-hog {
 		gpio-hog;
 		gpios = <87 GPIO_ACTIVE_HIGH>;
 		input;
-- 
2.17.1