Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Adam Ford <aford173@gmail.com>
To:     linux-arm-kernel@lists.infradead.org
Cc:     aford@beaconembedded.com, Adam Ford <aford173@gmail.com>,
        Rob Herring <robh+dt@kernel.org>,
        Shawn Guo <shawnguo@kernel.org>,
        Sascha Hauer <s.hauer@pengutronix.de>,
        Pengutronix Kernel Team <kernel@pengutronix.de>,
        Fabio Estevam <festevam@gmail.com>,
        NXP Linux Team <linux-imx@nxp.com>,
        Andrey Smirnov <andrew.smirnov@gmail.com>,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 4/5] arm64: dts: imx8mn: Add power-domain reference in USB controller
Date:   Mon, 24 May 2021 20:07:31 -0500
Message-Id: <20210525010732.115562-5-aford173@gmail.com>
In-Reply-To: <20210525010732.115562-1-aford173@gmail.com>
References: <20210525010732.115562-1-aford173@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The USB OTG controller cannot be used until the power-domain is enabled
unless it was started in the bootloader.

Adding the power-domain reference to the OTG node allows the OTG
controller to operate.

Signed-off-by: Adam Ford <aford173@gmail.com>

diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 0eb64b59c8e3..8b1fb83cb893 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -1009,6 +1009,7 @@ usbotg1: usb@32e40000 {
 				assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>;
 				fsl,usbphy = <&usbphynop1>;
 				fsl,usbmisc = <&usbmisc1 0>;
+				power-domains = <&pgc_otg1>;
 				status = "disabled";
 			};
 
-- 
2.25.1