Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Oleksij Rempel <o.rempel@pengutronix.de>
To:     Woojung Huh <woojung.huh@microchip.com>,
        UNGLinuxDriver@microchip.com, Andrew Lunn <andrew@lunn.ch>,
        Florian Fainelli <f.fainelli@gmail.com>,
        Vivien Didelot <vivien.didelot@gmail.com>,
        Vladimir Oltean <olteanv@gmail.com>,
        "David S. Miller" <davem@davemloft.net>,
        Jakub Kicinski <kuba@kernel.org>
Cc:     Oleksij Rempel <o.rempel@pengutronix.de>, kernel@pengutronix.de,
        netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
        Russell King <linux@armlinux.org.uk>,
        Michael Grzeschik <m.grzeschik@pengutronix.de>
Subject: [PATCH net-next v3 3/9] net: phy: micrel: use consistent indention after define
Date:   Wed, 26 May 2021 06:30:31 +0200
Message-Id: <20210526043037.9830-4-o.rempel@pengutronix.de>
In-Reply-To: <20210526043037.9830-1-o.rempel@pengutronix.de>
References: <20210526043037.9830-1-o.rempel@pengutronix.de>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

This patch changes the indention to one space between "#define" and the
macro.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/phy/micrel.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index a14a00328fa3..227d88db7d27 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -38,15 +38,15 @@
 
 /* general Interrupt control/status reg in vendor specific block. */
 #define MII_KSZPHY_INTCS			0x1B
-#define	KSZPHY_INTCS_JABBER			BIT(15)
-#define	KSZPHY_INTCS_RECEIVE_ERR		BIT(14)
-#define	KSZPHY_INTCS_PAGE_RECEIVE		BIT(13)
-#define	KSZPHY_INTCS_PARELLEL			BIT(12)
-#define	KSZPHY_INTCS_LINK_PARTNER_ACK		BIT(11)
-#define	KSZPHY_INTCS_LINK_DOWN			BIT(10)
-#define	KSZPHY_INTCS_REMOTE_FAULT		BIT(9)
-#define	KSZPHY_INTCS_LINK_UP			BIT(8)
-#define	KSZPHY_INTCS_ALL			(KSZPHY_INTCS_LINK_UP |\
+#define KSZPHY_INTCS_JABBER			BIT(15)
+#define KSZPHY_INTCS_RECEIVE_ERR		BIT(14)
+#define KSZPHY_INTCS_PAGE_RECEIVE		BIT(13)
+#define KSZPHY_INTCS_PARELLEL			BIT(12)
+#define KSZPHY_INTCS_LINK_PARTNER_ACK		BIT(11)
+#define KSZPHY_INTCS_LINK_DOWN			BIT(10)
+#define KSZPHY_INTCS_REMOTE_FAULT		BIT(9)
+#define KSZPHY_INTCS_LINK_UP			BIT(8)
+#define KSZPHY_INTCS_ALL			(KSZPHY_INTCS_LINK_UP |\
 						KSZPHY_INTCS_LINK_DOWN)
 #define	KSZPHY_INTCS_LINK_DOWN_STATUS		BIT(2)
 #define	KSZPHY_INTCS_LINK_UP_STATUS		BIT(0)
@@ -54,11 +54,11 @@
 						 KSZPHY_INTCS_LINK_UP_STATUS)
 
 /* PHY Control 1 */
-#define	MII_KSZPHY_CTRL_1			0x1e
+#define MII_KSZPHY_CTRL_1			0x1e
 
 /* PHY Control 2 / PHY Control (if no PHY Control 1) */
-#define	MII_KSZPHY_CTRL_2			0x1f
-#define	MII_KSZPHY_CTRL				MII_KSZPHY_CTRL_2
+#define MII_KSZPHY_CTRL_2			0x1f
+#define MII_KSZPHY_CTRL				MII_KSZPHY_CTRL_2
 /* bitmap of PHY register to set interrupt mode */
 #define KSZPHY_CTRL_INT_ACTIVE_HIGH		BIT(9)
 #define KSZPHY_RMII_REF_CLK_SEL			BIT(7)
-- 
2.29.2