Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Thu, 27 May 2021 15:30:17 +0530
From:   Pratyush Yadav <p.yadav@ti.com>
To:     <patrice.chotard@foss.st.com>
CC:     Mark Brown <broonie@kernel.org>,
        Miquel Raynal <miquel.raynal@bootlin.com>,
        Vignesh Raghavendra <vigneshr@ti.com>,
        Boris Brezillon <boris.brezillon@collabora.com>,
        <linux-mtd@lists.infradead.org>,
        Alexandre Torgue <alexandre.torgue@foss.st.com>,
        <linux-spi@vger.kernel.org>,
        <linux-stm32@st-md-mailman.stormreply.com>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>, <christophe.kerello@foss.st.com>
Subject: Re: mtd: spinand: add spi nand mtd resume handler
Message-ID: <20210527100015.abxcroi23zyvcyzk@ti.com>
References: <20210526153016.32653-1-patrice.chotard@foss.st.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Disposition: inline
In-Reply-To: <20210526153016.32653-1-patrice.chotard@foss.st.com>
User-Agent: NeoMutt/20171215
Precedence: bulk

On 26/05/21 05:30PM, patrice.chotard@foss.st.com wrote:
> From: Christophe Kerello <christophe.kerello@foss.st.com>
> 
> After power up, all SPI NAND's blocks are locked. Only read operations
> are allowed, write and erase operations are forbidden.
> The SPI NAND framework unlocks all the blocks during its initialization.
> 
> During a standby low power, the memory is powered down, losing its
> configuration.
> During the resume, the QSPI driver state is restored but the SPI NAND
> framework does not reconfigured the memory.
> 
> This patch adds spi nand mtd PM handlers for resume ops.
> SPI NAND resume op re-initializes SPI NAND flash to its probed state.
> 
> Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
> ---
>  drivers/mtd/nand/spi/core.c | 56 +++++++++++++++++++++++++++++++++++++
>  1 file changed, 56 insertions(+)
> 
> diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
> index 17f63f95f4a2..6abaf874eb3f 100644
> --- a/drivers/mtd/nand/spi/core.c
> +++ b/drivers/mtd/nand/spi/core.c
> @@ -1074,6 +1074,61 @@ static int spinand_detect(struct spinand_device *spinand)
>  	return 0;
>  }
>  
> +static void spinand_mtd_resume(struct mtd_info *mtd)
> +{
> +	struct spinand_device *spinand = mtd_to_spinand(mtd);
> +	struct nand_device *nand = mtd_to_nanddev(mtd);
> +	struct device *dev = &spinand->spimem->spi->dev;
> +	int ret, i;
> +
> +	ret = spinand_reset_op(spinand);
> +	if (ret)
> +		return;
> +
> +	ret = spinand_init_quad_enable(spinand);
> +	if (ret) {
> +		dev_err(dev,
> +			"Failed to initialize the quad part (err = %d)\n",
> +			ret);
> +		return;
> +	}
> +
> +	ret = spinand_upd_cfg(spinand, CFG_OTP_ENABLE, 0);
> +	if (ret) {
> +		dev_err(dev,
> +			"Failed to updtae the OTP (err = %d)\n",
> +			ret);
> +		return;
> +	}

Since you have reset the flash, this cache is invalid. You should reset 
the cache and re-populate it before using it in any way.

> +
> +	ret = spinand_manufacturer_init(spinand);
> +	if (ret) {
> +		dev_err(dev,
> +			"Failed to initialize the SPI NAND chip (err = %d)\n",
> +			ret);
> +		return;
> +	}
> +
> +	/* After power up, all blocks are locked, so unlock them here. */
> +	for (i = 0; i < nand->memorg.ntargets; i++) {
> +		ret = spinand_select_target(spinand, i);
> +		if (ret) {
> +			dev_err(dev,
> +				"Failed to select the target (err = %d)\n",
> +				ret);
> +			return;
> +		}
> +
> +		ret = spinand_lock_block(spinand, BL_ALL_UNLOCKED);
> +		if (ret) {
> +			dev_err(dev,
> +				"Failed to unlock block (err = %d)\n",
> +				ret);
> +			return;
> +		}
> +	}
> +}
> +

Most of these seem to be copied from spinand_init(). I think it is 
better to create a common function that can be called from both 
spinand_init() and spinand_mtd_resume(). This way when someone adds 
something new to the init procedure, like support for some other modes, 
they won't have to remember to update it in two places.

>  static int spinand_init(struct spinand_device *spinand)
>  {
>  	struct device *dev = &spinand->spimem->spi->dev;
> @@ -1167,6 +1222,7 @@ static int spinand_init(struct spinand_device *spinand)
>  	mtd->_block_isreserved = spinand_mtd_block_isreserved;
>  	mtd->_erase = spinand_mtd_erase;
>  	mtd->_max_bad_blocks = nanddev_mtd_max_bad_blocks;
> +	mtd->_resume = spinand_mtd_resume;

Is it possible that the userspace can use this mtd device before the 
resume is finished? Is there a way to temporarily "pause" or unregister 
an mtd device?

>  
>  	if (nand->ecc.engine) {
>  		ret = mtd_ooblayout_count_freebytes(mtd);

-- 
Regards,
Pratyush Yadav
Texas Instruments Inc.