Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Rob Herring <robh@kernel.org>
To:     Rajendra Nayak <rnayak@codeaurora.org>
Cc:     devicetree@vger.kernel.org, ulf.hansson@linaro.org,
        linux-kernel@vger.kernel.org, viresh.kumar@linaro.org,
        bjorn.andersson@linaro.org, swboyd@chromium.org,
        robh+dt@kernel.org, linux-pm@vger.kernel.org, rojay@codeaurora.org,
        linux-arm-msm@vger.kernel.org
In-Reply-To: <1622095949-2014-2-git-send-email-rnayak@codeaurora.org>
References: <1622095949-2014-1-git-send-email-rnayak@codeaurora.org> <1622095949-2014-2-git-send-email-rnayak@codeaurora.org>
Subject: Re: [PATCH v2 1/3] dt-bindings: power: Introduce 'assigned-performance-states' property
Date:   Thu, 27 May 2021 09:23:27 -0500
Message-Id: <1622125407.790558.731791.nullmailer@robh.at.kernel.org>
Precedence: bulk

On Thu, 27 May 2021 11:42:27 +0530, Rajendra Nayak wrote:
> While most devices within power-domains which support performance states,
> scale the performance state dynamically, some devices might want to
> set a static/default performance state while the device is active.
> These devices typically would also run off a fixed clock and not support
> dynamically scaling the device's performance, also known as DVFS techniques.
> Add a property 'assigned-performance-states' which client devices can
> use to set this default performance state on their power-domains.
> 
> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
> ---
>  .../devicetree/bindings/power/power-domain.yaml    | 50 ++++++++++++++++++++++
>  1 file changed, 50 insertions(+)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/power/power-domain.yaml:72:8: [warning] wrong indentation: expected 6 but found 7 (indentation)

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/power/power-domain.example.dt.yaml:0:0: /example-3/power-controller@43210000/opp-table: failed to match any schema with compatible: ['operating-points-v2']

See https://patchwork.ozlabs.org/patch/1484441

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.