Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Pratyush Yadav <p.yadav@ti.com>
To:     Tudor Ambarus <tudor.ambarus@microchip.com>,
        Michael Walle <michael@walle.cc>,
        Pratyush Yadav <p.yadav@ti.com>,
        Miquel Raynal <miquel.raynal@bootlin.com>,
        Richard Weinberger <richard@nod.at>,
        Vignesh Raghavendra <vigneshr@ti.com>,
        Mark Brown <broonie@kernel.org>,
        <linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
        <linux-spi@vger.kernel.org>
Subject: [PATCH v2 4/6] spi: spi-mem: reject partial cycle transfers in 8D-8D-8D mode
Date:   Mon, 31 May 2021 23:47:55 +0530
Message-ID: <20210531181757.19458-5-p.yadav@ti.com>
In-Reply-To: <20210531181757.19458-1-p.yadav@ti.com>
References: <20210531181757.19458-1-p.yadav@ti.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

In 8D-8D-8D mode two bytes are transferred per cycle. So an odd number
of bytes cannot be transferred because it would leave a residual half
cycle at the end. Consider such a transfer invalid and reject it.

Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Mark Brown <broonie@kernel.org>

---

Changes in v2:
- Add Mark's R-by (spell corrected).

 drivers/spi/spi-mem.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
index 1513553e4080..ab9eefbaa1d9 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -162,7 +162,17 @@ static bool spi_mem_check_buswidth(struct spi_mem *mem,
 bool spi_mem_dtr_supports_op(struct spi_mem *mem,
 			     const struct spi_mem_op *op)
 {
-	if (op->cmd.nbytes != 2)
+	if (op->cmd.buswidth == 8 && op->cmd.nbytes % 2)
+		return false;
+
+	if (op->addr.nbytes && op->addr.buswidth == 8 && op->addr.nbytes % 2)
+		return false;
+
+	if (op->dummy.nbytes && op->dummy.buswidth == 8 && op->dummy.nbytes % 2)
+		return false;
+
+	if (op->data.dir != SPI_MEM_NO_DATA &&
+	    op->dummy.buswidth == 8 && op->data.nbytes % 2)
 		return false;
 
 	return spi_mem_check_buswidth(mem, op);
-- 
2.30.0