Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Jiri Slaby <jslaby@suse.cz>
To:     gregkh@linuxfoundation.org
Cc:     linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org,
        Jiri Slaby <jslaby@suse.cz>, Arnd Bergmann <arnd@arndb.de>,
        David Lin <dtwlin@gmail.com>, Johan Hovold <johan@kernel.org>,
        Alex Elder <elder@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
        Sascha Hauer <s.hauer@pengutronix.de>,
        Andy Gross <agross@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Maxime Coquelin <mcoquelin.stm32@gmail.com>,
        Alexandre Torgue <alexandre.torgue@foss.st.com>,
        Oliver Neukum <oneukum@suse.com>
Subject: [PATCH v3 4/4] tty: make use of tty_get_{char,frame}_size
Date:   Thu, 10 Jun 2021 11:02:47 +0200
Message-Id: <20210610090247.2593-4-jslaby@suse.cz>
In-Reply-To: <20210610090247.2593-1-jslaby@suse.cz>
References: <20210505091928.22010-1-jslaby@suse.cz>
 <20210610090247.2593-1-jslaby@suse.cz>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

In the previous patch, we introduced tty_get_char_size() and
tty_get_frame_size() for computing character and frame sizes,
respectively. Here, we make use of them in various tty drivers where
applicable.

The stats look nice: 12 insertions, 169 deletions.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Lin <dtwlin@gmail.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: Alex Elder <elder@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Oliver Neukum <oneukum@suse.com>
---
[v2] rebase mxs-auart and cypress_m8; drop C_CSIZE from pl2303

 drivers/char/pcmcia/synclink_cs.c           |  8 +-----
 drivers/staging/greybus/uart.c              | 16 +----------
 drivers/tty/serial/cpm_uart/cpm_uart_core.c | 19 +-----------
 drivers/tty/serial/mxs-auart.c              | 22 ++------------
 drivers/tty/serial/qcom_geni_serial.c       | 16 +----------
 drivers/tty/serial/sh-sci.c                 | 20 +------------
 drivers/tty/serial/stm32-usart.c            | 32 +--------------------
 drivers/tty/synclink_gt.c                   |  9 +-----
 drivers/usb/class/cdc-acm.c                 | 17 ++---------
 drivers/usb/serial/belkin_sa.c              | 20 +------------
 drivers/usb/serial/cypress_m8.c             | 19 ++----------
 drivers/usb/serial/pl2303.c                 | 15 +---------
 drivers/usb/serial/whiteheat.c              |  9 +-----
 13 files changed, 16 insertions(+), 206 deletions(-)

diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index 9f7420bc5026..6eaefea0520e 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -1419,13 +1419,7 @@ static void mgslpc_change_params(MGSLPC_INFO *info, struct tty_struct *tty)
 
 	/* byte size and parity */
 
-	switch (cflag & CSIZE) {
-	case CS5: info->params.data_bits = 5; break;
-	case CS6: info->params.data_bits = 6; break;
-	case CS7: info->params.data_bits = 7; break;
-	case CS8: info->params.data_bits = 8; break;
-	default:  info->params.data_bits = 7; break;
-	}
+	info->params.data_bits = tty_get_char_size(cflag);
 
 	if (cflag & CSTOPB)
 		info->params.stop_bits = 2;
diff --git a/drivers/staging/greybus/uart.c b/drivers/staging/greybus/uart.c
index ccfaa0f21b9c..73f01ed1e5b7 100644
--- a/drivers/staging/greybus/uart.c
+++ b/drivers/staging/greybus/uart.c
@@ -494,21 +494,7 @@ static void gb_tty_set_termios(struct tty_struct *tty,
 				(termios->c_cflag & PARODD ? 1 : 2) +
 				(termios->c_cflag & CMSPAR ? 2 : 0) : 0;
 
-	switch (termios->c_cflag & CSIZE) {
-	case CS5:
-		newline.data_bits = 5;
-		break;
-	case CS6:
-		newline.data_bits = 6;
-		break;
-	case CS7:
-		newline.data_bits = 7;
-		break;
-	case CS8:
-	default:
-		newline.data_bits = 8;
-		break;
-	}
+	newline.data_bits = tty_get_char_size(termios->c_cflag);
 
 	/* FIXME: needs to clear unsupported bits in the termios */
 	gb_tty->clocal = ((termios->c_cflag & CLOCAL) != 0);
diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
index 58aaa533203b..c719aa2b1832 100644
--- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
@@ -524,24 +524,7 @@ static void cpm_uart_set_termios(struct uart_port *port,
 	scval = 0;
 
 	/* byte size */
-	switch (termios->c_cflag & CSIZE) {
-	case CS5:
-		bits = 5;
-		break;
-	case CS6:
-		bits = 6;
-		break;
-	case CS7:
-		bits = 7;
-		break;
-	case CS8:
-		bits = 8;
-		break;
-		/* Never happens, but GCC is too dumb to figure it out */
-	default:
-		bits = 8;
-		break;
-	}
+	bits = tty_get_char_size(termios->c_cflag);
 	sbits = bits - 5;
 
 	if (termios->c_cflag & CSTOPB) {
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index 7b4b6bb75424..ac45f3386e97 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -962,7 +962,7 @@ static void mxs_auart_settermios(struct uart_port *u,
 				 struct ktermios *old)
 {
 	struct mxs_auart_port *s = to_auart_port(u);
-	u32 bm, ctrl, ctrl2, div;
+	u32 ctrl, ctrl2, div;
 	unsigned int cflag, baud, baud_min, baud_max;
 
 	cflag = termios->c_cflag;
@@ -970,25 +970,7 @@ static void mxs_auart_settermios(struct uart_port *u,
 	ctrl = AUART_LINECTRL_FEN;
 	ctrl2 = mxs_read(s, REG_CTRL2);
 
-	/* byte size */
-	switch (cflag & CSIZE) {
-	case CS5:
-		bm = 5;
-		break;
-	case CS6:
-		bm = 6;
-		break;
-	case CS7:
-		bm = 7;
-		break;
-	case CS8:
-		bm = 8;
-		break;
-	default:
-		return;
-	}
-
-	ctrl |= AUART_LINECTRL_WLEN(bm);
+	ctrl |= AUART_LINECTRL_WLEN(tty_get_char_size(cflag));
 
 	/* parity */
 	if (cflag & PARENB) {
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 463f84a66f6e..379ab15daa85 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -1050,21 +1050,7 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport,
 	}
 
 	/* bits per char */
-	switch (termios->c_cflag & CSIZE) {
-	case CS5:
-		bits_per_char = 5;
-		break;
-	case CS6:
-		bits_per_char = 6;
-		break;
-	case CS7:
-		bits_per_char = 7;
-		break;
-	case CS8:
-	default:
-		bits_per_char = 8;
-		break;
-	}
+	bits_per_char = tty_get_char_size(termios->c_cflag);
 
 	/* stop bits */
 	if (termios->c_cflag & CSTOPB)
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 92c92df24f5d..3a9379bbcd57 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -2495,25 +2495,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 	uart_update_timeout(port, termios->c_cflag, baud);
 
 	/* byte size and parity */
-	switch (termios->c_cflag & CSIZE) {
-	case CS5:
-		bits = 7;
-		break;
-	case CS6:
-		bits = 8;
-		break;
-	case CS7:
-		bits = 9;
-		break;
-	default:
-		bits = 10;
-		break;
-	}
-
-	if (termios->c_cflag & CSTOPB)
-		bits++;
-	if (termios->c_cflag & PARENB)
-		bits++;
+	bits = tty_get_frame_size(termios->c_cflag);
 
 	if (sci_getreg(port, SEMR)->size)
 		serial_port_out(port, SEMR, 0);
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index bf188bdf9717..f88e6bc4fd91 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -718,36 +718,6 @@ static void stm32_usart_shutdown(struct uart_port *port)
 	free_irq(port->irq, port);
 }
 
-static unsigned int stm32_usart_get_databits(struct ktermios *termios)
-{
-	unsigned int bits;
-
-	tcflag_t cflag = termios->c_cflag;
-
-	switch (cflag & CSIZE) {
-	/*
-	 * CSIZE settings are not necessarily supported in hardware.
-	 * CSIZE unsupported configurations are handled here to set word length
-	 * to 8 bits word as default configuration and to print debug message.
-	 */
-	case CS5:
-		bits = 5;
-		break;
-	case CS6:
-		bits = 6;
-		break;
-	case CS7:
-		bits = 7;
-		break;
-	/* default including CS8 */
-	default:
-		bits = 8;
-		break;
-	}
-
-	return bits;
-}
-
 static void stm32_usart_set_termios(struct uart_port *port,
 				    struct ktermios *termios,
 				    struct ktermios *old)
@@ -805,7 +775,7 @@ static void stm32_usart_set_termios(struct uart_port *port,
 	if (cflag & CSTOPB)
 		cr2 |= USART_CR2_STOP_2B;
 
-	bits = stm32_usart_get_databits(termios);
+	bits = tty_get_char_size(cflag);
 	stm32_port->rdr_mask = (BIT(bits) - 1);
 
 	if (cflag & PARENB) {
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index cf87dc66087b..5bb928b7873e 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -2465,14 +2465,7 @@ static void change_params(struct slgt_info *info)
 
 	/* byte size and parity */
 
-	switch (cflag & CSIZE) {
-	case CS5: info->params.data_bits = 5; break;
-	case CS6: info->params.data_bits = 6; break;
-	case CS7: info->params.data_bits = 7; break;
-	case CS8: info->params.data_bits = 8; break;
-	default:  info->params.data_bits = 7; break;
-	}
-
+	info->params.data_bits = tty_get_char_size(cflag);
 	info->params.stop_bits = (cflag & CSTOPB) ? 2 : 1;
 
 	if (cflag & PARENB)
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 81199efe0312..c9954eb56e00 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1056,21 +1056,8 @@ static void acm_tty_set_termios(struct tty_struct *tty,
 	newline.bParityType = termios->c_cflag & PARENB ?
 				(termios->c_cflag & PARODD ? 1 : 2) +
 				(termios->c_cflag & CMSPAR ? 2 : 0) : 0;
-	switch (termios->c_cflag & CSIZE) {
-	case CS5:
-		newline.bDataBits = 5;
-		break;
-	case CS6:
-		newline.bDataBits = 6;
-		break;
-	case CS7:
-		newline.bDataBits = 7;
-		break;
-	case CS8:
-	default:
-		newline.bDataBits = 8;
-		break;
-	}
+	newline.bDataBits = tty_get_char_size(termios->c_cflag);
+
 	/* FIXME: Needs to clear unsupported bits in the termios */
 	acm->clocal = ((termios->c_cflag & CLOCAL) != 0);
 
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index ed9193f3bb1a..8107e4b5b03b 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -356,25 +356,7 @@ static void belkin_sa_set_termios(struct tty_struct *tty,
 
 	/* set the number of data bits */
 	if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
-		switch (cflag & CSIZE) {
-		case CS5:
-			urb_value = BELKIN_SA_DATA_BITS(5);
-			break;
-		case CS6:
-			urb_value = BELKIN_SA_DATA_BITS(6);
-			break;
-		case CS7:
-			urb_value = BELKIN_SA_DATA_BITS(7);
-			break;
-		case CS8:
-			urb_value = BELKIN_SA_DATA_BITS(8);
-			break;
-		default:
-			dev_dbg(&port->dev,
-				"CSIZE was not CS5-CS8, using default of 8\n");
-			urb_value = BELKIN_SA_DATA_BITS(8);
-			break;
-		}
+		urb_value = BELKIN_SA_DATA_BITS(tty_get_char_size(cflag));
 		if (BSA_USB_CMD(BELKIN_SA_SET_DATA_BITS_REQUEST, urb_value) < 0)
 			dev_err(&port->dev, "Set data bits error\n");
 	}
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index ad8ed5361677..6b18990258c3 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -887,23 +887,8 @@ static void cypress_set_termios(struct tty_struct *tty,
 	} else
 		parity_enable = parity_type = 0;
 
-	switch (cflag & CSIZE) {
-	case CS5:
-		data_bits = 5;
-		break;
-	case CS6:
-		data_bits = 6;
-		break;
-	case CS7:
-		data_bits = 7;
-		break;
-	case CS8:
-		data_bits = 8;
-		break;
-	default:
-		dev_err(dev, "%s - CSIZE was set, but not CS5-CS8\n", __func__);
-		data_bits = 8;
-	}
+	data_bits = tty_get_char_size(cflag);
+
 	spin_lock_irqsave(&priv->lock, flags);
 	oldlines = priv->line_control;
 	if ((cflag & CBAUD) == B0) {
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 940050c31482..2f2f5047452b 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -789,20 +789,7 @@ static void pl2303_set_termios(struct tty_struct *tty,
 
 	pl2303_get_line_request(port, buf);
 
-	switch (C_CSIZE(tty)) {
-	case CS5:
-		buf[6] = 5;
-		break;
-	case CS6:
-		buf[6] = 6;
-		break;
-	case CS7:
-		buf[6] = 7;
-		break;
-	default:
-	case CS8:
-		buf[6] = 8;
-	}
+	buf[6] = tty_get_char_size(tty->termios.c_cflag);
 	dev_dbg(&port->dev, "data bits = %d\n", buf[6]);
 
 	/* For reference buf[0]:buf[3] baud rate value */
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 5116ed9db3eb..da65d14c9ed5 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -625,14 +625,7 @@ static void firm_setup_port(struct tty_struct *tty)
 
 	port_settings.port = port->port_number + 1;
 
-	/* get the byte size */
-	switch (cflag & CSIZE) {
-	case CS5:	port_settings.bits = 5;   break;
-	case CS6:	port_settings.bits = 6;   break;
-	case CS7:	port_settings.bits = 7;   break;
-	default:
-	case CS8:	port_settings.bits = 8;   break;
-	}
+	port_settings.bits = tty_get_char_size(cflag);
 	dev_dbg(dev, "%s - data bits = %d\n", __func__, port_settings.bits);
 
 	/* determine the parity */
-- 
2.32.0