Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Grygorii Strashko <grygorii.strashko@ti.com>
To:     Tony Lindgren <tony@atomide.com>
CC:     Lokesh Vutla <lokeshvutla@ti.com>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>,
        Vignesh Raghavendra <vigneshr@ti.com>,
        <linux-omap@vger.kernel.org>,
        Grygorii Strashko <grygorii.strashko@ti.com>,
        Yegor Yefremov <yegorslists@googlemail.com>,
        Christina Quast <cquast@hanoverdisplays.com>
Subject: [PATCH next 01/15] ARM: dts: am335x-baltos: switch to new cpsw switch drv
Date:   Sat, 12 Jun 2021 04:14:22 +0300
Message-ID: <20210612011436.10437-2-grygorii.strashko@ti.com>
In-Reply-To: <20210612011436.10437-1-grygorii.strashko@ti.com>
References: <20210612011436.10437-1-grygorii.strashko@ti.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.

So, switch OnRISC Baltos and NetCom/Cam boards to use new cpsw switch
driver. Those boards have or 2 Ext. port wired and configured in dual_mac
mode by default, or only 1 Ext. port.

Cc: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Christina Quast <cquast@hanoverdisplays.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
 arch/arm/boot/dts/am335x-baltos-ir2110.dts   | 10 +++++-----
 arch/arm/boot/dts/am335x-baltos-ir3220.dts   |  8 ++++----
 arch/arm/boot/dts/am335x-baltos-ir5221.dts   |  8 ++++----
 arch/arm/boot/dts/am335x-baltos.dtsi         |  5 ++---
 arch/arm/boot/dts/am335x-netcan-plus-1xx.dts | 10 +++++-----
 arch/arm/boot/dts/am335x-netcom-plus-2xx.dts | 10 +++++-----
 arch/arm/boot/dts/am335x-netcom-plus-8xx.dts | 10 +++++-----
 7 files changed, 30 insertions(+), 31 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-baltos-ir2110.dts b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
index 56915b6d818d..daf4cb398070 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir2110.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
@@ -58,21 +58,21 @@
 	dr_mode = "host";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	phy0: ethernet-phy@0 {
 		reg = <1>;
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 	phy-handle = <&phy0>;
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-mode = "rgmii-id";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 	phy-handle = <&phy1>;
 };
 
diff --git a/arch/arm/boot/dts/am335x-baltos-ir3220.dts b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
index d8d60398d803..2123bd589484 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir3220.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
@@ -103,18 +103,18 @@
 	dr_mode = "host";
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 	fixed-link {
 		speed = <100>;
 		full-duplex;
 	};
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-mode = "rgmii-id";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 	phy-handle = <&phy1>;
 };
 
diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
index 8096d459b93f..2f3872dbf4f4 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
@@ -120,18 +120,18 @@
 	dr_mode = "host";
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 	fixed-link {
 		speed = <100>;
 		full-duplex;
 	};
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-mode = "rgmii-id";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 	phy-handle = <&phy1>;
 };
 
diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi
index 1103a2cb836f..366702630290 100644
--- a/arch/arm/boot/dts/am335x-baltos.dtsi
+++ b/arch/arm/boot/dts/am335x-baltos.dtsi
@@ -339,16 +339,15 @@
 	};
 };
 
-&mac {
+&mac_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
-	dual_emac = <1>;
 
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	status = "okay";
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
diff --git a/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts
index 8303b832aa50..57e756b0f192 100644
--- a/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts
+++ b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts
@@ -61,21 +61,21 @@
 	dr_mode = "host";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	phy0: ethernet-phy@0 {
 		reg = <1>;
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 	phy-handle = <&phy0>;
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-mode = "rgmii-id";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 	phy-handle = <&phy1>;
 };
 
diff --git a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
index f8e0e95a751f..c6cc1c6218a9 100644
--- a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
+++ b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
@@ -76,20 +76,20 @@
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	phy0: ethernet-phy@0 {
 		reg = <1>;
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 	phy-handle = <&phy0>;
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-mode = "rgmii-id";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 	phy-handle = <&phy1>;
 };
diff --git a/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
index a4e137527215..96dffd3ffd85 100644
--- a/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
+++ b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
@@ -96,20 +96,20 @@
 	};
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	phy0: ethernet-phy@0 {
 		reg = <1>;
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 	phy-handle = <&phy0>;
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-mode = "rgmii-id";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 	phy-handle = <&phy1>;
 };
-- 
2.17.1