Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753860AbWKGXOK (ORCPT ); Tue, 7 Nov 2006 18:14:10 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1753866AbWKGXOK (ORCPT ); Tue, 7 Nov 2006 18:14:10 -0500 Received: from py-out-1112.google.com ([64.233.166.177]:6644 "EHLO py-out-1112.google.com") by vger.kernel.org with ESMTP id S1753860AbWKGXOJ (ORCPT ); Tue, 7 Nov 2006 18:14:09 -0500 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:date:from:x-x-sender:to:cc:subject:message-id:mime-version:content-type; b=JrLJMQw9qbj91ZFlwhFkTSRLm86KZ4VPeUY1crdt4R+0YclLiyStQHxSgMEwL0FO6GuIaVcPN8wDYdvwmZD4gubzE+/tFFkpJqCnzGhunvi2EyRKUnKrs6r1wHK5A2Du+KlagIA99tTIpeLo0QmofLvkTiw6662trO8aSC7AnlA= Date: Wed, 8 Nov 2006 07:13:32 +0800 (SGT) From: Jeff Chua X-X-Sender: root@silvia.corp.fedex.com To: Aaron Durbin cc: Matthew Wilcox , Linux Kernel Subject: Re: [PATCH] i386: Update MMCONFIG resource insertion to check against e820 map. Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 20003 Lines: 422 On 11/8/06, Aaron Durbin wrote: > Do you mind posting your dmesg from the machine that originally didn't > work? I would like to take a look it. Aaron, Here's the bad one again ... Linux version 2.6.19-rc4 (root@indiana.corp.fedex.com) (gcc version 3.4.5) #1 SMP PREEMPT Sun Nov 5 17:18:48 SGT 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000df686c00 (usable) BIOS-e820: 00000000df686c00 - 00000000df688c00 (ACPI NVS) BIOS-e820: 00000000df688c00 - 00000000df68ac00 (ACPI data) BIOS-e820: 00000000df68ac00 - 00000000e0000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 2678MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000fe710 Entering add_active_range(0, 0, 915078) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 915078 early_node_map[1] active PFN ranges 0: 0 -> 915078 On node 0 totalpages: 915078 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 5357 pages used for memmap HighMem zone: 680345 pages, LIFO batch:31 DMI 2.3 present. ACPI: RSDP (v002 DELL ) @ 0x000feb00 ACPI: XSDT (v001 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd253 ACPI: FADT (v003 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd34b ACPI: SSDT (v001 DELL st_ex 0x00001000 INTL 0x20050309) @ 0xfffd6996 ACPI: MADT (v001 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd43f ACPI: BOOT (v001 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd4b1 ACPI: ASF! (v016 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd4d9 ACPI: MCFG (v001 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd540 ACPI: HPET (v001 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd57e ACPI: SSDT (v001 DpgPmm Cpu0Ist 0x00000011 INTL 0x20050309) @ 0xdf686c40 ACPI: SSDT (v001 DpgPmm Cpu1Ist 0x00000011 INTL 0x20050309) @ 0xdf687049 ACPI: SSDT (v001 DpgPmm CpuPm 0x00000010 INTL 0x20050309) @ 0xdf687452 ACPI: DSDT (v001 DELL dt_ex 0x00001000 INTL 0x20050309) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled) ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at e1000000 (gap: e0000000:10000000) Detected 2992.724 MHz processor. Built 1 zonelists. Total pages: 907929 Kernel command line: BOOT_IMAGE=(hd0,1)/linux/bzc1 root=/dev/sda2 resume=/dev/sda3 testing_only="this is got to be good. Now I can send in a very long line just like 2.4 and need not worry about the line being too long. What a great way to start a great year!!! Cool!" mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 3625948k/3660312k available (2402k kernel code, 33292k reserved, 848k data, 200k init, 2742808k highmem) virtual kernel memory layout: fixmap : 0xfff4f000 - 0xfffff000 ( 704 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0433000 - 0xc0465000 ( 200 kB) .data : 0xc0358928 - 0xc042cab4 ( 848 kB) .text : 0xc0100000 - 0xc0358928 (2402 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Using HPET for base-timer Calibrating delay using timer specific routine.. 5990.52 BogoMIPS (lpj=11981048) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000649d 00000000 00000001 Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20060707 CPU0: Intel(R) Pentium(R) D CPU 3.00GHz stepping 07 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5985.35 BogoMIPS (lpj=11970701) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000001 monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000649d 00000000 00000001 CPU1: Intel(R) Pentium(R) D CPU 3.00GHz stepping 07 Total of 2 processors activated (11975.87 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=327 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Boot video device is 0000:00:02.0 PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 0880-08bf claimed by ICH6 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15) ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 10 devices SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 8 of bridge 0000:00:01.0 PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0 PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1 PCI: Cannot allocate resource region 0 of device 0000:00:02.0 PCI: Cannot allocate resource region 3 of device 0000:00:02.0 PCI: Cannot allocate resource region 0 of device 0000:00:02.1 PCI: Cannot allocate resource region 0 of device 0000:00:1d.7 PCI: Cannot allocate resource region 2 of device 0000:00:1e.2 PCI: Cannot allocate resource region 3 of device 0000:00:1e.2 PCI: Cannot allocate resource region 0 of device 0000:02:00.0 NET: Registered protocol family 23 pnp: 00:01: ioport range 0x800-0x85f could not be reserved pnp: 00:01: ioport range 0xc00-0xc7f has been reserved pnp: 00:01: ioport range 0x860-0x8ff could not be reserved pnp: 00:09: ioport range 0x100-0x1fe has been reserved pnp: 00:09: ioport range 0x200-0x277 has been reserved pnp: 00:09: ioport range 0x280-0x2e7 has been reserved pnp: 00:09: ioport range 0x2f0-0x2f7 has been reserved pnp: 00:09: ioport range 0x300-0x377 has been reserved pnp: 00:09: ioport range 0x380-0x3bb has been reserved pnp: 00:09: ioport range 0x3c0-0x3e7 could not be reserved pnp: 00:09: ioport range 0x3f6-0x3f7 has been reserved PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Failed to allocate mem resource #8:100000@e1000000 for 0000:00:1c.0 PCI: Failed to allocate mem resource #0:80000@e1000000 for 0000:00:02.0 PCI: Failed to allocate mem resource #0:80000@e1000000 for 0000:00:02.1 PCI: Failed to allocate mem resource #3:40000@e1000000 for 0000:00:02.0 PCI: Failed to allocate mem resource #0:400@e1000000 for 0000:00:1d.7 PCI: Failed to allocate mem resource #2:200@e1000000 for 0000:00:1e.2 PCI: Failed to allocate mem resource #3:100@e1000000 for 0000:00:1e.2 PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Failed to allocate mem resource #0:10000@0 for 0000:02:00.0 PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 262144 (order: 9, 3145728 bytes) TCP bind hash table entries: 65536 (order: 7, 786432 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered Simple Boot Flag at 0x7a set to 0x1 apm: disabled - APM is not SMP safe. highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] Allocate Port Service[0000:00:01.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] Allocate Port Service[0000:00:1c.1:pcie03] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp_glue: can't get bus number, assuming 0 acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed pciehp: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0 Evaluate _OSC Set fails. Status = 0x0005 Evaluate _OSC Set fails. Status = 0x0005 pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.0 pciehp: HPC vendor_id 8086 device_id 27d2 ss_vid 0 ss_did 0 Evaluate _OSC Set fails. Status = 0x0005 Evaluate _OSC Set fails. Status = 0x0005 pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.1 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [VBTN] ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x3 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x4 ibm_acpi: ec object not found Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 945G Chipset. agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xe0000000 [drm] Initialized drm 1.0.1 20051102 RAMDISK driver initialized: 16 RAM disks of 20480K size 1024 blocksize loop: loaded (max 8 devices) HP CISS Driver (v 3.6.10) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH7: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 ICH7: chipset revision 1 ICH7: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio Probing IDE interface ide0... hda: HL-DT-ST DVD+/-RW GWA4164B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006) megasas: 00.00.03.05 Mon Oct 02 11:21:32 PDT 2006 libata version 2.00 loaded. ata_piix 0000:00:1f.2: version 2.00ac6 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEA0 irq 18 ata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEA8 irq 18 scsi0 : ata_piix ata1.00: ATA-7, max UDMA/133, 488281250 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 8 ata1.01: ATA-7, max UDMA/133, 488281250 sectors: LBA48 NCQ (depth 0/32) ata1.01: ata1: dev 1 multi count 8 ata1.00: configured for UDMA/133 ata1.01: configured for UDMA/133 scsi1 : ata_piix ata2: port is slow to respond, please be patient (Status 0xff) ata2: port failed to respond (30 secs, Status 0xff) ata2: SRST failed (status 0xFF) ata2: SRST failed (err_mask=0x100) ata2: softreset failed, retrying in 5 secs ata2: SRST failed (status 0xFF) ata2: SRST failed (err_mask=0x100) ata2: softreset failed, retrying in 5 secs ata2: SRST failed (status 0xFF) ata2: SRST failed (err_mask=0x100) ata2: reset failed, giving up scsi 0:0:0:0: Direct-Access ATA WDC WD2500JS-75N 10.0 PQ: 0 ANSI: 5 SCSI device sda: 488281250 512-byte hdwr sectors (250000 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 488281250 512-byte hdwr sectors (250000 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 > sd 0:0:0:0: Attached scsi disk sda scsi 0:0:1:0: Direct-Access ATA WDC WD2500JS-75N 10.0 PQ: 0 ANSI: 5 SCSI device sdb: 488281250 512-byte hdwr sectors (250000 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back SCSI device sdb: 488281250 512-byte hdwr sectors (250000 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back sdb: sd 0:0:1:0: Attached scsi disk sdb usbmon: debugfs is not available ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 19 ACPI: PCI interrupt for device 0000:00:1d.7 disabled ehci_hcd 0000:00:1d.7: init 0000:00:1d.7 fail, -16 ehci_hcd: probe of 0000:00:1d.7 failed with error -16 USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000ff80 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000ff60 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000ff40 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 22, io base 0x0000ff20 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 3-1: new low speed USB device using uhci_hcd and address 2 usb 3-1: configuration #1 chosen from 1 choice usb 3-2: new low speed USB device using uhci_hcd and address 3 usb 3-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Dell Dell USB Keyboard as /class/input/input0 input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.2-1 input: USB Optical Mouse as /class/input/input1 input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.2-2 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com EDAC MC: Ver: 2.0.1 Nov 5 2006 TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Starting balanced_irq Using IPI No-Shortcut mode Time: tsc clocksource has been installed. ACPI: (supports S0 S1 S3 S4 S5) VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 200k freed Adding 7823644k swap on /dev/sda3. Priority:-1 extents:1 across:7823644k tg3.c:v3.67 (October 18, 2006) ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 tg3: Cannot find proper PCI device base address, aborting. ACPI: PCI interrupt for device 0000:02:00.0 disabled ip_tables: (C) 2000-2006 Netfilter Core Team ip_conntrack version 2.4 (8192 buckets, 65536 max) - 228 bytes per conntrack Thanks, Jeff - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/