Received: by 2002:a05:6a10:206:0:0:0:0 with SMTP id 6csp2845994pxj; Mon, 14 Jun 2021 08:27:28 -0700 (PDT) X-Google-Smtp-Source: ABdhPJyZwo6UOIddxcqUorFdov13xrU2IkU5faZDVzpdcz0vP8Y6GEMuZcpFS/VxSwx1f5+Qque8 X-Received: by 2002:a05:6402:1cad:: with SMTP id cz13mr16320896edb.67.1623684448049; Mon, 14 Jun 2021 08:27:28 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1623684448; cv=none; d=google.com; s=arc-20160816; b=BM2fhMkWovyIvUh/OkcnBpjD6dmUogvBnKL3rkj5DFm3b9pW9DIv7aIrsm7KADtJDm bw1HTKXXYtpXkn2wPjQY6retmq5UQ4eeXJDFUi0q6Cz8Qx53D2tiApssrmnkyOYfk6Vp hp+PdlsjXCgKvCWkVI0APb1Yn51QakSkGycrFBF7iA/SvxD6620+YqUADAjYUb3o8gAu FuofvVNhdSEbHwrnfl1fLFrfBufCDzH0HGrcZ+h8y6K39vltyVymDbJ50sw3sl14jnHn UobIJ56B+mHL37at/A7eYrslItaFTI/RtKWdkDnqqv+GiaRXDo+G0HTkYrid03LtdSLw ws6g== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from:sender :dkim-signature; bh=mVp2vdhh4RAmyJm3DKsG3NC6mTldWx3CxYZSdDKTnJI=; b=OvtthGnu3leaXCkYk/je6zlIrmLDQiixumdHxj5tI+l7Meo8qH6SrqX7iDABzHZzBX 4wV2+0g+DkqQCn0zVe+ABP91oGJ2dCpk3TC+xcVEPI8Oe9KxznLm7imyKC76Jie4EBvO CYBYvbk4DE2tC3IWxbYJkWgIqveiHaK9vtbl4fjNfA51/8ISCWLRgZkRg/5XEFx4x00d vrva2ROq8OC3mI1X8ggbEVcnfeK3WMZ2fi9PkTbciuQThS0wgPpaxm/T5FMRrZP5Wwv+ wJdypUPSiu1aLBV6otYAPyeBqfnzQzLyA9yXG4wItb6JWzcuyX8FaDLJy9FwQAEetoz7 2EJA== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@monstr-eu.20150623.gappssmtp.com header.s=20150623 header.b=l0asTT7o; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=xilinx.com Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id b8si11740965ejl.368.2021.06.14.08.27.04; Mon, 14 Jun 2021 08:27:28 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; dkim=pass header.i=@monstr-eu.20150623.gappssmtp.com header.s=20150623 header.b=l0asTT7o; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=xilinx.com Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233352AbhFNP17 (ORCPT + 99 others); Mon, 14 Jun 2021 11:27:59 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:40504 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233288AbhFNP16 (ORCPT ); Mon, 14 Jun 2021 11:27:58 -0400 Received: from mail-ej1-x62e.google.com (mail-ej1-x62e.google.com [IPv6:2a00:1450:4864:20::62e]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 90312C0613A3 for ; Mon, 14 Jun 2021 08:25:54 -0700 (PDT) Received: by mail-ej1-x62e.google.com with SMTP id k25so17347977eja.9 for ; Mon, 14 Jun 2021 08:25:54 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=monstr-eu.20150623.gappssmtp.com; s=20150623; h=sender:from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=mVp2vdhh4RAmyJm3DKsG3NC6mTldWx3CxYZSdDKTnJI=; b=l0asTT7oPy1f+I8X4oPMb3QkX0Cxg0dMDPkX8tYzTO5y7iSREB0/pf1jcZ+rDoyri9 2vbSpB8KTdSBfLQwAAVWtC4FVjI+4xiQ5OJtUU/IYCGahqI68LV6PyU0YixtjMTi5z9f PdBQyAXmUJEciAgcj9YH0vX6HEcJtjS4afM0iiXnN+jBtYE273uoz7pI3stj6Z3xFd+1 KPytBJQLOLltZfgyWfYWsBI1Puzwzk6ZjhGvQPWqa7hWDdaLBP9wCKoDSUY1qV7Iwr0R IKKmIF69HzMv3QpFBGieqy47f5sE26iElD+GvHp+6tMzIHNo4J0ieEMbqKfcj0gdS1hP LWzg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:sender:from:to:cc:subject:date:message-id :in-reply-to:references:mime-version:content-transfer-encoding; bh=mVp2vdhh4RAmyJm3DKsG3NC6mTldWx3CxYZSdDKTnJI=; b=ebKTVteccjyQB070DigbZv4hhDIijdzhxgBSdnJ72nx51SuXjM3LicHPkWCKnkl6/M BLaifV6mGvNihuU4MKWolj54TO2QKf8e7CTU0yO2yOdKmy1ZV87chW4HZFlwh8FXJ0h6 M7HnQL4EuxBoh60IyqXcpexOD/Ig0xTo5fBl9QT01oSzbeqBvBbQHTKPJ/mgPNOljSBV deAOmzJErzD7Nr0DqSVpYz22pknxpyFfoOsAEo9spV8SpFDnvOF8p3oJ1SNfhvIXBuD6 oUQRm1wOO9CfEwXJRwLIek2YKuZv7B5Mz2/y4PzuCdSseWjUAJo2eSvT+2s2b+/HwaLy fGOA== X-Gm-Message-State: AOAM530L086iU1iYnPQFQee7r5gmyyhlMbWBJRNGYd24qQUij7sbZhsz 0y9QkVs/fxAVpC0F4sOv0IxpahX2zeSiktFg X-Received: by 2002:a17:906:80cd:: with SMTP id a13mr15889371ejx.421.1623684350889; Mon, 14 Jun 2021 08:25:50 -0700 (PDT) Received: from localhost ([2a02:768:2307:40d6:f666:9af6:3fed:e53b]) by smtp.gmail.com with ESMTPSA id f8sm7521987ejw.75.2021.06.14.08.25.50 (version=TLS1_2 cipher=ECDHE-ECDSA-CHACHA20-POLY1305 bits=256/256); Mon, 14 Jun 2021 08:25:50 -0700 (PDT) Sender: Michal Simek From: Michal Simek To: linux-kernel@vger.kernel.org, monstr@monstr.eu, michal.simek@xilinx.com, git@xilinx.com, Viresh Kumar Cc: Amit Kumar Mahapatra , Krzysztof Kozlowski , Laurent Pinchart , Quanyang Wang , Rob Herring , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 05/33] arm64: zynqmp: Add pinctrl description for all boards Date: Mon, 14 Jun 2021 17:25:13 +0200 Message-Id: X-Mailer: git-send-email 2.32.0 In-Reply-To: References: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The commit 1dccb5ec0123 ("dt-bindings: pinctrl: Add binding for ZynqMP pinctrl driver") and commit 8b242ca700f8 ("pinctrl: Add Xilinx ZynqMP pinctrl driver support") add support for Xilinx ZynqMP pinctrl driver that's why describe pins configuration for current boards. Signed-off-by: Michal Simek --- Changes in v2: None .../dts/xilinx/zynqmp-zc1751-xm015-dc1.dts | 230 +++++++++++- .../dts/xilinx/zynqmp-zc1751-xm016-dc2.dts | 303 +++++++++++++++- .../dts/xilinx/zynqmp-zc1751-xm019-dc5.dts | 329 +++++++++++++++++- .../boot/dts/xilinx/zynqmp-zcu100-revC.dts | 241 ++++++++++++- .../boot/dts/xilinx/zynqmp-zcu102-revA.dts | 290 ++++++++++++++- .../boot/dts/xilinx/zynqmp-zcu104-revA.dts | 218 +++++++++++- .../boot/dts/xilinx/zynqmp-zcu104-revC.dts | 218 +++++++++++- .../boot/dts/xilinx/zynqmp-zcu106-revA.dts | 290 ++++++++++++++- .../boot/dts/xilinx/zynqmp-zcu111-revA.dts | 227 +++++++++++- arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 5 + 10 files changed, 2340 insertions(+), 11 deletions(-) diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts index 69f6e4610739..5b258129c7ef 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP zc1751-xm015-dc1 * - * (C) Copyright 2015 - 2019, Xilinx, Inc. + * (C) Copyright 2015 - 2021, Xilinx, Inc. * * Michal Simek */ @@ -12,6 +12,7 @@ #include "zynqmp.dtsi" #include "zynqmp-clk-ccf.dtsi" #include +#include / { model = "ZynqMP zc1751-xm015-dc1 RevA"; @@ -73,6 +74,8 @@ &gem3 { status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem3_default>; phy0: ethernet-phy@0 { reg = <0>; }; @@ -80,12 +83,19 @@ phy0: ethernet-phy@0 { &gpio { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_default>; }; &i2c1 { status = "okay"; clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 36 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; eeprom: eeprom@55 { compatible = "atmel,24c64"; /* 24AA64 */ @@ -93,6 +103,216 @@ eeprom: eeprom@55 { }; }; +&pinctrl0 { + status = "okay"; + pinctrl_i2c1_default: i2c1-default { + mux { + groups = "i2c1_9_grp"; + function = "i2c1"; + }; + + conf { + groups = "i2c1_9_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + mux { + groups = "gpio0_36_grp", "gpio0_37_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_36_grp", "gpio0_37_grp"; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_uart0_default: uart0-default { + mux { + groups = "uart0_8_grp"; + function = "uart0"; + }; + + conf { + groups = "uart0_8_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO34"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO35"; + bias-disable; + }; + }; + + pinctrl_usb0_default: usb0-default { + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + + conf { + groups = "usb0_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO52", "MIO53", "MIO55"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", + "MIO60", "MIO61", "MIO62", "MIO63"; + bias-disable; + }; + }; + + pinctrl_gem3_default: gem3-default { + mux { + function = "ethernet3"; + groups = "ethernet3_0_grp"; + }; + + conf { + groups = "ethernet3_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74", + "MIO75"; + bias-high-impedance; + low-power-disable; + }; + + conf-tx { + pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68", + "MIO69"; + bias-disable; + low-power-enable; + }; + + mux-mdio { + function = "mdio3"; + groups = "mdio3_0_grp"; + }; + + conf-mdio { + groups = "mdio3_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + }; + + pinctrl_sdhci0_default: sdhci0-default { + mux { + groups = "sdio0_0_grp"; + function = "sdio0"; + }; + + conf { + groups = "sdio0_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + + mux-cd { + groups = "sdio0_cd_0_grp"; + function = "sdio0_cd"; + }; + + conf-cd { + groups = "sdio0_cd_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + + mux-wp { + groups = "sdio0_wp_0_grp"; + function = "sdio0_wp"; + }; + + conf-wp { + groups = "sdio0_wp_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_sdhci1_default: sdhci1-default { + mux { + groups = "sdio1_0_grp"; + function = "sdio1"; + }; + + conf { + groups = "sdio1_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + + mux-cd { + groups = "sdio1_cd_0_grp"; + function = "sdio1_cd"; + }; + + conf-cd { + groups = "sdio1_cd_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + + mux-wp { + groups = "sdio1_wp_0_grp"; + function = "sdio1_wp"; + }; + + conf-wp { + groups = "sdio1_wp_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_gpio_default: gpio-default { + mux { + function = "gpio0"; + groups = "gpio0_38_grp"; + }; + + conf { + groups = "gpio0_38_grp"; + bias-disable; + slew-rate = ; + power-source = ; + }; + }; +}; + &rtc { status = "okay"; }; @@ -113,20 +333,28 @@ &sata { /* eMMC */ &sdhci0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci0_default>; bus-width = <8>; }; /* SD1 with level shifter */ &sdhci1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci1_default>; }; &uart0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0_default>; }; /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; dr_mode = "host"; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts index f7124e15f0ff..1ac105a82e1b 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP zc1751-xm016-dc2 * - * (C) Copyright 2015 - 2019, Xilinx, Inc. + * (C) Copyright 2015 - 2021, Xilinx, Inc. * * Michal Simek */ @@ -12,6 +12,7 @@ #include "zynqmp.dtsi" #include "zynqmp-clk-ccf.dtsi" #include +#include / { model = "ZynqMP zc1751-xm016-dc2 RevA"; @@ -42,10 +43,14 @@ memory@0 { &can0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can0_default>; }; &can1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_default>; }; &fpd_dma_chan1 { @@ -84,6 +89,8 @@ &gem2 { status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem2_default>; phy0: ethernet-phy@5 { reg = <5>; ti,rx-internal-delay = <0x8>; @@ -100,6 +107,11 @@ &gpio { &i2c0 { status = "okay"; clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c0_default>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + scl-gpios = <&gpio 6 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; tca6416_u26: gpio@20 { compatible = "ti,tca6416"; @@ -115,6 +127,285 @@ rtc@68 { }; }; +&pinctrl0 { + status = "okay"; + pinctrl_can0_default: can0-default { + mux { + function = "can0"; + groups = "can0_9_grp"; + }; + + conf { + groups = "can0_9_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO38"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO39"; + bias-disable; + }; + }; + + pinctrl_can1_default: can1-default { + mux { + function = "can1"; + groups = "can1_8_grp"; + }; + + conf { + groups = "can1_8_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO33"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO32"; + bias-disable; + }; + }; + + pinctrl_i2c0_default: i2c0-default { + mux { + groups = "i2c0_1_grp"; + function = "i2c0"; + }; + + conf { + groups = "i2c0_1_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_i2c0_gpio: i2c0-gpio { + mux { + groups = "gpio0_6_grp", "gpio0_7_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_6_grp", "gpio0_7_grp"; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_uart0_default: uart0-default { + mux { + groups = "uart0_10_grp"; + function = "uart0"; + }; + + conf { + groups = "uart0_10_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO42"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO43"; + bias-disable; + }; + }; + + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart1_10_grp"; + function = "uart1"; + }; + + conf { + groups = "uart1_10_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO41"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO40"; + bias-disable; + }; + }; + + pinctrl_usb1_default: usb1-default { + mux { + groups = "usb1_0_grp"; + function = "usb1"; + }; + + conf { + groups = "usb1_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO64", "MIO65", "MIO67"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71", + "MIO72", "MIO73", "MIO74", "MIO75"; + bias-disable; + }; + }; + + pinctrl_gem2_default: gem2-default { + mux { + function = "ethernet2"; + groups = "ethernet2_0_grp"; + }; + + conf { + groups = "ethernet2_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO58", "MIO59", "MIO60", "MIO61", "MIO62", + "MIO63"; + bias-high-impedance; + low-power-disable; + }; + + conf-tx { + pins = "MIO52", "MIO53", "MIO54", "MIO55", "MIO56", + "MIO57"; + bias-disable; + low-power-enable; + }; + + mux-mdio { + function = "mdio2"; + groups = "mdio2_0_grp"; + }; + + conf-mdio { + groups = "mdio2_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + }; + + pinctrl_nand0_default: nand0-default { + mux { + groups = "nand0_0_grp"; + function = "nand0"; + }; + + conf { + groups = "nand0_0_grp"; + bias-pull-up; + }; + + mux-ce { + groups = "nand0_ce_0_grp"; + function = "nand0_ce"; + }; + + conf-ce { + groups = "nand0_ce_0_grp"; + bias-pull-up; + }; + + mux-rb { + groups = "nand0_rb_0_grp"; + function = "nand0_rb"; + }; + + conf-rb { + groups = "nand0_rb_0_grp"; + bias-pull-up; + }; + + mux-dqs { + groups = "nand0_dqs_0_grp"; + function = "nand0_dqs"; + }; + + conf-dqs { + groups = "nand0_dqs_0_grp"; + bias-pull-up; + }; + }; + + pinctrl_spi0_default: spi0-default { + mux { + groups = "spi0_0_grp"; + function = "spi0"; + }; + + conf { + groups = "spi0_0_grp"; + bias-disable; + slew-rate = ; + power-source = ; + }; + + mux-cs { + groups = "spi0_ss_0_grp", "spi0_ss_1_grp", + "spi0_ss_2_grp"; + function = "spi0_ss"; + }; + + conf-cs { + groups = "spi0_ss_0_grp", "spi0_ss_1_grp", + "spi0_ss_2_grp"; + bias-disable; + }; + }; + + pinctrl_spi1_default: spi1-default { + mux { + groups = "spi1_3_grp"; + function = "spi1"; + }; + + conf { + groups = "spi1_3_grp"; + bias-disable; + slew-rate = ; + power-source = ; + }; + + mux-cs { + groups = "spi1_ss_9_grp", "spi1_ss_10_grp", + "spi1_ss_11_grp"; + function = "spi1_ss"; + }; + + conf-cs { + groups = "spi1_ss_9_grp", "spi1_ss_10_grp", + "spi1_ss_11_grp"; + bias-disable; + }; + }; +}; + &rtc { status = "okay"; }; @@ -122,6 +413,8 @@ &rtc { &spi0 { status = "okay"; num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0_default>; spi0_flash0: flash@0 { #address-cells = <1>; @@ -140,6 +433,8 @@ partition@0 { &spi1 { status = "okay"; num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; spi1_flash0: flash@0 { #address-cells = <1>; @@ -158,13 +453,19 @@ partition@0 { /* ULPI SMSC USB3320 */ &usb1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_default>; dr_mode = "host"; }; &uart0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0_default>; }; &uart1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts index 41934e3525c6..6c9460a0707c 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP zc1751-xm019-dc5 * - * (C) Copyright 2015 - 2019, Xilinx, Inc. + * (C) Copyright 2015 - 2021, Xilinx, Inc. * * Siva Durga Prasad * Michal Simek @@ -13,6 +13,7 @@ #include "zynqmp.dtsi" #include "zynqmp-clk-ccf.dtsi" #include +#include / { model = "ZynqMP zc1751-xm019-dc5 RevA"; @@ -74,6 +75,8 @@ &gem1 { status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem1_default>; phy0: ethernet-phy@0 { reg = <0>; }; @@ -85,41 +88,365 @@ &gpio { &i2c0 { status = "okay"; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c0_default>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + scl-gpios = <&gpio 74 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 75 GPIO_ACTIVE_HIGH>; }; &i2c1 { status = "okay"; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 76 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 77 GPIO_ACTIVE_HIGH>; + +}; + +&pinctrl0 { + status = "okay"; + pinctrl_i2c0_default: i2c0-default { + mux { + groups = "i2c0_18_grp"; + function = "i2c0"; + }; + + conf { + groups = "i2c0_18_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_i2c0_gpio: i2c0-gpio { + mux { + groups = "gpio0_74_grp", "gpio0_75_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_74_grp", "gpio0_75_grp"; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_i2c1_default: i2c1-default { + mux { + groups = "i2c1_19_grp"; + function = "i2c1"; + }; + + conf { + groups = "i2c1_19_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + mux { + groups = "gpio0_76_grp", "gpio0_77_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_76_grp", "gpio0_77_grp"; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_uart0_default: uart0-default { + mux { + groups = "uart0_17_grp"; + function = "uart0"; + }; + + conf { + groups = "uart0_17_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO70"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO71"; + bias-disable; + }; + }; + + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart1_18_grp"; + function = "uart1"; + }; + + conf { + groups = "uart1_18_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO73"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO72"; + bias-disable; + }; + }; + + pinctrl_gem1_default: gem1-default { + mux { + function = "ethernet1"; + groups = "ethernet1_0_grp"; + }; + + conf { + groups = "ethernet1_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO44", "MIO45", "MIO46", "MIO47", "MIO48", + "MIO49"; + bias-high-impedance; + low-power-disable; + }; + + conf-tx { + pins = "MIO38", "MIO39", "MIO40", "MIO41", "MIO42", + "MIO43"; + bias-disable; + low-power-enable; + }; + + mux-mdio { + function = "mdio1"; + groups = "mdio1_0_grp"; + }; + + conf-mdio { + groups = "mdio1_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + }; + + pinctrl_sdhci0_default: sdhci0-default { + mux { + groups = "sdio0_0_grp"; + function = "sdio0"; + }; + + conf { + groups = "sdio0_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + + mux-cd { + groups = "sdio0_cd_0_grp"; + function = "sdio0_cd"; + }; + + conf-cd { + groups = "sdio0_cd_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + + mux-wp { + groups = "sdio0_wp_0_grp"; + function = "sdio0_wp"; + }; + + conf-wp { + groups = "sdio0_wp_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_watchdog0_default: watchdog0-default { + mux-clk { + groups = "swdt0_clk_1_grp"; + function = "swdt0_clk"; + }; + + conf-clk { + groups = "swdt0_clk_1_grp"; + bias-pull-up; + }; + + mux-rst { + groups = "swdt0_rst_1_grp"; + function = "swdt0_rst"; + }; + + conf-rst { + groups = "swdt0_rst_1_grp"; + bias-disable; + slew-rate = ; + }; + }; + + pinctrl_ttc0_default: ttc0-default { + mux-clk { + groups = "ttc0_clk_0_grp"; + function = "ttc0_clk"; + }; + + conf-clk { + groups = "ttc0_clk_0_grp"; + bias-pull-up; + }; + + mux-wav { + groups = "ttc0_wav_0_grp"; + function = "ttc0_wav"; + }; + + conf-wav { + groups = "ttc0_wav_0_grp"; + bias-disable; + slew-rate = ; + }; + }; + + pinctrl_ttc1_default: ttc1-default { + mux-clk { + groups = "ttc1_clk_0_grp"; + function = "ttc1_clk"; + }; + + conf-clk { + groups = "ttc1_clk_0_grp"; + bias-pull-up; + }; + + mux-wav { + groups = "ttc1_wav_0_grp"; + function = "ttc1_wav"; + }; + + conf-wav { + groups = "ttc1_wav_0_grp"; + bias-disable; + slew-rate = ; + }; + }; + + pinctrl_ttc2_default: ttc2-default { + mux-clk { + groups = "ttc2_clk_0_grp"; + function = "ttc2_clk"; + }; + + conf-clk { + groups = "ttc2_clk_0_grp"; + bias-pull-up; + }; + + mux-wav { + groups = "ttc2_wav_0_grp"; + function = "ttc2_wav"; + }; + + conf-wav { + groups = "ttc2_wav_0_grp"; + bias-disable; + slew-rate = ; + }; + }; + + pinctrl_ttc3_default: ttc3-default { + mux-clk { + groups = "ttc3_clk_0_grp"; + function = "ttc3_clk"; + }; + + conf-clk { + groups = "ttc3_clk_0_grp"; + bias-pull-up; + }; + + mux-wav { + groups = "ttc3_wav_0_grp"; + function = "ttc3_wav"; + }; + + conf-wav { + groups = "ttc3_wav_0_grp"; + bias-disable; + slew-rate = ; + }; + }; }; &sdhci0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci0_default>; no-1-8-v; }; &ttc0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ttc0_default>; }; &ttc1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ttc1_default>; }; &ttc2 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ttc2_default>; }; &ttc3 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ttc3_default>; }; &uart0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0_default>; }; &uart1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; }; &watchdog0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_watchdog0_default>; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts index a53598c3624b..9c40c6552c32 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU100 revC * - * (C) Copyright 2016 - 2019, Xilinx, Inc. + * (C) Copyright 2016 - 2021, Xilinx, Inc. * * Michal Simek * Nathalie Chan King Choy @@ -15,6 +15,7 @@ #include #include #include +#include #include / { @@ -160,6 +161,11 @@ &gpio { &i2c1 { status = "okay"; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 4 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; clock-frequency = <100000>; i2c-mux@75 { /* u11 */ compatible = "nxp,pca9548"; @@ -237,8 +243,222 @@ i2csw_7: i2c@7 { }; }; -&psgtr { +&pinctrl0 { status = "okay"; + pinctrl_i2c1_default: i2c1-default { + mux { + groups = "i2c1_1_grp"; + function = "i2c1"; + }; + + conf { + groups = "i2c1_1_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + mux { + groups = "gpio0_4_grp", "gpio0_5_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_4_grp", "gpio0_5_grp"; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_sdhci0_default: sdhci0-default { + mux { + groups = "sdio0_3_grp"; + function = "sdio0"; + }; + + conf { + groups = "sdio0_3_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + + mux-cd { + groups = "sdio0_cd_0_grp"; + function = "sdio0_cd"; + }; + + conf-cd { + groups = "sdio0_cd_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_sdhci1_default: sdhci1-default { + mux { + groups = "sdio1_2_grp"; + function = "sdio1"; + }; + + conf { + groups = "sdio1_2_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + }; + + pinctrl_spi0_default: spi0-default { + mux { + groups = "spi0_3_grp"; + function = "spi0"; + }; + + conf { + groups = "spi0_3_grp"; + bias-disable; + slew-rate = ; + power-source = ; + }; + + mux-cs { + groups = "spi0_ss_9_grp"; + function = "spi0_ss"; + }; + + conf-cs { + groups = "spi0_ss_9_grp"; + bias-disable; + }; + + }; + + pinctrl_spi1_default: spi1-default { + mux { + groups = "spi1_0_grp"; + function = "spi1"; + }; + + conf { + groups = "spi1_0_grp"; + bias-disable; + slew-rate = ; + power-source = ; + }; + + mux-cs { + groups = "spi1_ss_0_grp"; + function = "spi1_ss"; + }; + + conf-cs { + groups = "spi1_ss_0_grp"; + bias-disable; + }; + + }; + + pinctrl_uart0_default: uart0-default { + mux { + groups = "uart0_0_grp"; + function = "uart0"; + }; + + conf { + groups = "uart0_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO3"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO2"; + bias-disable; + }; + }; + + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart1_0_grp"; + function = "uart1"; + }; + + conf { + groups = "uart1_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO1"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO0"; + bias-disable; + }; + }; + + pinctrl_usb0_default: usb0-default { + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + + conf { + groups = "usb0_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO52", "MIO53", "MIO55"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", + "MIO60", "MIO61", "MIO62", "MIO63"; + bias-disable; + }; + }; + + pinctrl_usb1_default: usb1-default { + mux { + groups = "usb1_0_grp"; + function = "usb1"; + }; + + conf { + groups = "usb1_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO64", "MIO65", "MIO67"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71", + "MIO72", "MIO73", "MIO74", "MIO75"; + bias-disable; + }; + }; +}; + +&psgtr { /* usb3, dps */ clocks = <&si5335a_0>, <&si5335a_1>; clock-names = "ref0", "ref1"; @@ -253,12 +473,16 @@ &sdhci0 { status = "okay"; no-1-8-v; disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci0_default>; xlnx,mio-bank = <0>; }; &sdhci1 { status = "okay"; bus-width = <0x4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci1_default>; xlnx,mio-bank = <0>; non-removable; disable-wp; @@ -279,16 +503,22 @@ &spi0 { /* Low Speed connector */ status = "okay"; label = "LS-SPI0"; num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0_default>; }; &spi1 { /* High Speed connector */ status = "okay"; label = "HS-SPI1"; num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; }; &uart0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0_default>; bluetooth { compatible = "ti,wl1831-st"; enable-gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; @@ -297,18 +527,23 @@ bluetooth { &uart1 { status = "okay"; - + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; }; /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; dr_mode = "peripheral"; }; /* ULPI SMSC USB3320 */ &usb1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_default>; dr_mode = "host"; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts index eca6c2de84a7..b37aee2d85b9 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU102 RevA * - * (C) Copyright 2015 - 2019, Xilinx, Inc. + * (C) Copyright 2015 - 2021, Xilinx, Inc. * * Michal Simek */ @@ -13,6 +13,7 @@ #include "zynqmp-clk-ccf.dtsi" #include #include +#include #include / { @@ -150,6 +151,8 @@ refhdmi: refhdmi { &can1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_default>; }; &dcc { @@ -192,6 +195,8 @@ &gem3 { status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem3_default>; phy0: ethernet-phy@21 { reg = <21>; ti,rx-internal-delay = <0x8>; @@ -203,11 +208,18 @@ phy0: ethernet-phy@21 { &gpio { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_default>; }; &i2c0 { status = "okay"; clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c0_default>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; tca6416_u97: gpio@20 { compatible = "ti,tca6416"; @@ -468,6 +480,11 @@ max20751@73 { /* u96 */ &i2c1 { status = "okay"; clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; /* PL i2c via PCA9306 - u45 */ i2c-mux@74 { /* u34 */ @@ -642,6 +659,269 @@ i2c@7 { }; }; +&pinctrl0 { + status = "okay"; + pinctrl_i2c0_default: i2c0-default { + mux { + groups = "i2c0_3_grp"; + function = "i2c0"; + }; + + conf { + groups = "i2c0_3_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_i2c0_gpio: i2c0-gpio { + mux { + groups = "gpio0_14_grp", "gpio0_15_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_14_grp", "gpio0_15_grp"; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_i2c1_default: i2c1-default { + mux { + groups = "i2c1_4_grp"; + function = "i2c1"; + }; + + conf { + groups = "i2c1_4_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + mux { + groups = "gpio0_16_grp", "gpio0_17_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_16_grp", "gpio0_17_grp"; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_uart0_default: uart0-default { + mux { + groups = "uart0_4_grp"; + function = "uart0"; + }; + + conf { + groups = "uart0_4_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO18"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO19"; + bias-disable; + }; + }; + + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart1_5_grp"; + function = "uart1"; + }; + + conf { + groups = "uart1_5_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO21"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO20"; + bias-disable; + }; + }; + + pinctrl_usb0_default: usb0-default { + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + + conf { + groups = "usb0_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO52", "MIO53", "MIO55"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", + "MIO60", "MIO61", "MIO62", "MIO63"; + bias-disable; + }; + }; + + pinctrl_gem3_default: gem3-default { + mux { + function = "ethernet3"; + groups = "ethernet3_0_grp"; + }; + + conf { + groups = "ethernet3_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74", + "MIO75"; + bias-high-impedance; + low-power-disable; + }; + + conf-tx { + pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68", + "MIO69"; + bias-disable; + low-power-enable; + }; + + mux-mdio { + function = "mdio3"; + groups = "mdio3_0_grp"; + }; + + conf-mdio { + groups = "mdio3_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + }; + + pinctrl_can1_default: can1-default { + mux { + function = "can1"; + groups = "can1_6_grp"; + }; + + conf { + groups = "can1_6_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO25"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO24"; + bias-disable; + }; + }; + + pinctrl_sdhci1_default: sdhci1-default { + mux { + groups = "sdio1_0_grp"; + function = "sdio1"; + }; + + conf { + groups = "sdio1_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + + mux-cd { + groups = "sdio1_cd_0_grp"; + function = "sdio1_cd"; + }; + + conf-cd { + groups = "sdio1_cd_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + + mux-wp { + groups = "sdio1_wp_0_grp"; + function = "sdio1_wp"; + }; + + conf-wp { + groups = "sdio1_wp_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_gpio_default: gpio-default { + mux-sw { + function = "gpio0"; + groups = "gpio0_22_grp", "gpio0_23_grp"; + }; + + conf-sw { + groups = "gpio0_22_grp", "gpio0_23_grp"; + slew-rate = ; + power-source = ; + }; + + mux-msp { + function = "gpio0"; + groups = "gpio0_13_grp", "gpio0_38_grp"; + }; + + conf-msp { + groups = "gpio0_13_grp", "gpio0_38_grp"; + slew-rate = ; + power-source = ; + }; + + conf-pull-up { + pins = "MIO22", "MIO23"; + bias-pull-up; + }; + + conf-pull-none { + pins = "MIO13", "MIO38"; + bias-disable; + }; + }; +}; + &pcie { status = "okay"; }; @@ -676,20 +956,28 @@ &sata { &sdhci1 { status = "okay"; no-1-8-v; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci1_default>; xlnx,mio-bank = <1>; }; &uart0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0_default>; }; &uart1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; }; /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; dr_mode = "host"; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts index 5c35edd736aa..7e1b024f71e1 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU104 * - * (C) Copyright 2017 - 2019, Xilinx, Inc. + * (C) Copyright 2017 - 2021, Xilinx, Inc. * * Michal Simek */ @@ -12,6 +12,7 @@ #include "zynqmp.dtsi" #include "zynqmp-clk-ccf.dtsi" #include +#include #include / { @@ -59,6 +60,8 @@ clock_8t49n287_3: clk27 { &can1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_default>; }; &dcc { @@ -101,6 +104,8 @@ &gem3 { status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem3_default>; phy0: ethernet-phy@c { reg = <0xc>; ti,rx-internal-delay = <0x8>; @@ -117,6 +122,11 @@ &gpio { &i2c1 { status = "okay"; clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; /* Another connection to this bus via PL i2c via PCA9306 - u45 */ i2c-mux@74 { /* u34 */ @@ -207,6 +217,204 @@ i2c@7 { }; }; +&pinctrl0 { + status = "okay"; + + pinctrl_can1_default: can1-default { + mux { + function = "can1"; + groups = "can1_6_grp"; + }; + + conf { + groups = "can1_6_grp"; + slew-rate = ; + power-source = ; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO25"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO24"; + bias-disable; + }; + }; + + pinctrl_i2c1_default: i2c1-default { + mux { + groups = "i2c1_4_grp"; + function = "i2c1"; + }; + + conf { + groups = "i2c1_4_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + drive-strength = <12>; + }; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + mux { + groups = "gpio0_16_grp", "gpio0_17_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_16_grp", "gpio0_17_grp"; + slew-rate = ; + power-source = ; + drive-strength = <12>; + }; + }; + + pinctrl_gem3_default: gem3-default { + mux { + function = "ethernet3"; + groups = "ethernet3_0_grp"; + }; + + conf { + groups = "ethernet3_0_grp"; + slew-rate = ; + power-source = ; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74", + "MIO75"; + bias-high-impedance; + low-power-disable; + }; + + conf-tx { + pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68", + "MIO69"; + bias-disable; + low-power-enable; + }; + + mux-mdio { + function = "mdio3"; + groups = "mdio3_0_grp"; + }; + + conf-mdio { + groups = "mdio3_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + }; + + pinctrl_sdhci1_default: sdhci1-default { + mux { + groups = "sdio1_0_grp"; + function = "sdio1"; + }; + + conf { + groups = "sdio1_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + drive-strength = <12>; + }; + + mux-cd { + groups = "sdio1_cd_0_grp"; + function = "sdio1_cd"; + }; + + conf-cd { + groups = "sdio1_cd_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_uart0_default: uart0-default { + mux { + groups = "uart0_4_grp"; + function = "uart0"; + }; + + conf { + groups = "uart0_4_grp"; + slew-rate = ; + power-source = ; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO18"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO19"; + bias-disable; + }; + }; + + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart1_5_grp"; + function = "uart1"; + }; + + conf { + groups = "uart1_5_grp"; + slew-rate = ; + power-source = ; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO21"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO20"; + bias-disable; + }; + }; + + pinctrl_usb0_default: usb0-default { + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + + conf { + groups = "usb0_0_grp"; + slew-rate = ; + power-source = ; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO52", "MIO53", "MIO55"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", + "MIO60", "MIO61", "MIO62", "MIO63"; + bias-disable; + }; + }; +}; + &rtc { status = "okay"; }; @@ -237,21 +445,29 @@ &sata { &sdhci1 { status = "okay"; no-1-8-v; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci1_default>; xlnx,mio-bank = <1>; disable-wp; }; &uart0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0_default>; }; &uart1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; }; /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; dr_mode = "host"; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts index 7f2e32831b05..b140fd2c86aa 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU104 * - * (C) Copyright 2017 - 2020, Xilinx, Inc. + * (C) Copyright 2017 - 2021, Xilinx, Inc. * * Michal Simek */ @@ -12,6 +12,7 @@ #include "zynqmp.dtsi" #include "zynqmp-clk-ccf.dtsi" #include +#include #include / { @@ -64,6 +65,8 @@ clock_8t49n287_3: clk27 { &can1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_default>; }; &dcc { @@ -106,6 +109,8 @@ &gem3 { status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem3_default>; phy0: ethernet-phy@c { reg = <0xc>; ti,rx-internal-delay = <0x8>; @@ -122,6 +127,11 @@ &gpio { &i2c1 { status = "okay"; clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; tca6416_u97: gpio@20 { compatible = "ti,tca6416"; @@ -219,6 +229,204 @@ i2c@7 { }; }; +&pinctrl0 { + status = "okay"; + + pinctrl_can1_default: can1-default { + mux { + function = "can1"; + groups = "can1_6_grp"; + }; + + conf { + groups = "can1_6_grp"; + slew-rate = ; + power-source = ; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO25"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO24"; + bias-disable; + }; + }; + + pinctrl_i2c1_default: i2c1-default { + mux { + groups = "i2c1_4_grp"; + function = "i2c1"; + }; + + conf { + groups = "i2c1_4_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + drive-strength = <12>; + }; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + mux { + groups = "gpio0_16_grp", "gpio0_17_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_16_grp", "gpio0_17_grp"; + slew-rate = ; + power-source = ; + drive-strength = <12>; + }; + }; + + pinctrl_gem3_default: gem3-default { + mux { + function = "ethernet3"; + groups = "ethernet3_0_grp"; + }; + + conf { + groups = "ethernet3_0_grp"; + slew-rate = ; + power-source = ; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74", + "MIO75"; + bias-high-impedance; + low-power-disable; + }; + + conf-tx { + pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68", + "MIO69"; + bias-disable; + low-power-enable; + }; + + mux-mdio { + function = "mdio3"; + groups = "mdio3_0_grp"; + }; + + conf-mdio { + groups = "mdio3_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + }; + + pinctrl_sdhci1_default: sdhci1-default { + mux { + groups = "sdio1_0_grp"; + function = "sdio1"; + }; + + conf { + groups = "sdio1_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + drive-strength = <12>; + }; + + mux-cd { + groups = "sdio1_cd_0_grp"; + function = "sdio1_cd"; + }; + + conf-cd { + groups = "sdio1_cd_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_uart0_default: uart0-default { + mux { + groups = "uart0_4_grp"; + function = "uart0"; + }; + + conf { + groups = "uart0_4_grp"; + slew-rate = ; + power-source = ; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO18"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO19"; + bias-disable; + }; + }; + + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart1_5_grp"; + function = "uart1"; + }; + + conf { + groups = "uart1_5_grp"; + slew-rate = ; + power-source = ; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO21"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO20"; + bias-disable; + }; + }; + + pinctrl_usb0_default: usb0-default { + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + + conf { + groups = "usb0_0_grp"; + slew-rate = ; + power-source = ; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO52", "MIO53", "MIO55"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", + "MIO60", "MIO61", "MIO62", "MIO63"; + bias-disable; + }; + }; +}; + &qspi { status = "okay"; flash@0 { @@ -259,21 +467,29 @@ &sata { &sdhci1 { status = "okay"; no-1-8-v; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci1_default>; xlnx,mio-bank = <1>; disable-wp; }; &uart0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0_default>; }; &uart1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; }; /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; dr_mode = "host"; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts index eff7c6447087..4919cdec835b 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU106 * - * (C) Copyright 2016 - 2019, Xilinx, Inc. + * (C) Copyright 2016 - 2021, Xilinx, Inc. * * Michal Simek */ @@ -13,6 +13,7 @@ #include "zynqmp-clk-ccf.dtsi" #include #include +#include #include / { @@ -150,6 +151,8 @@ refhdmi: refhdmi { &can1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_default>; }; &dcc { @@ -204,6 +207,8 @@ &gem3 { status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem3_default>; phy0: ethernet-phy@c { reg = <0xc>; ti,rx-internal-delay = <0x8>; @@ -215,11 +220,18 @@ phy0: ethernet-phy@c { &gpio { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_default>; }; &i2c0 { status = "okay"; clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c0_default>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; tca6416_u97: gpio@20 { compatible = "ti,tca6416"; @@ -478,6 +490,11 @@ max20751@73 { /* u96 */ &i2c1 { status = "okay"; clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; /* PL i2c via PCA9306 - u45 */ i2c-mux@74 { /* u34 */ @@ -652,6 +669,269 @@ i2c@7 { }; }; +&pinctrl0 { + status = "okay"; + pinctrl_i2c0_default: i2c0-default { + mux { + groups = "i2c0_3_grp"; + function = "i2c0"; + }; + + conf { + groups = "i2c0_3_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_i2c0_gpio: i2c0-gpio { + mux { + groups = "gpio0_14_grp", "gpio0_15_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_14_grp", "gpio0_15_grp"; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_i2c1_default: i2c1-default { + mux { + groups = "i2c1_4_grp"; + function = "i2c1"; + }; + + conf { + groups = "i2c1_4_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + mux { + groups = "gpio0_16_grp", "gpio0_17_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_16_grp", "gpio0_17_grp"; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_uart0_default: uart0-default { + mux { + groups = "uart0_4_grp"; + function = "uart0"; + }; + + conf { + groups = "uart0_4_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO18"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO19"; + bias-disable; + }; + }; + + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart1_5_grp"; + function = "uart1"; + }; + + conf { + groups = "uart1_5_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO21"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO20"; + bias-disable; + }; + }; + + pinctrl_usb0_default: usb0-default { + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + + conf { + groups = "usb0_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO52", "MIO53", "MIO55"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", + "MIO60", "MIO61", "MIO62", "MIO63"; + bias-disable; + }; + }; + + pinctrl_gem3_default: gem3-default { + mux { + function = "ethernet3"; + groups = "ethernet3_0_grp"; + }; + + conf { + groups = "ethernet3_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74", + "MIO75"; + bias-high-impedance; + low-power-disable; + }; + + conf-tx { + pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68", + "MIO69"; + bias-disable; + low-power-enable; + }; + + mux-mdio { + function = "mdio3"; + groups = "mdio3_0_grp"; + }; + + conf-mdio { + groups = "mdio3_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + }; + + pinctrl_can1_default: can1-default { + mux { + function = "can1"; + groups = "can1_6_grp"; + }; + + conf { + groups = "can1_6_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO25"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO24"; + bias-disable; + }; + }; + + pinctrl_sdhci1_default: sdhci1-default { + mux { + groups = "sdio1_0_grp"; + function = "sdio1"; + }; + + conf { + groups = "sdio1_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + + mux-cd { + groups = "sdio1_cd_0_grp"; + function = "sdio1_cd"; + }; + + conf-cd { + groups = "sdio1_cd_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + + mux-wp { + groups = "sdio1_wp_0_grp"; + function = "sdio1_wp"; + }; + + conf-wp { + groups = "sdio1_wp_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_gpio_default: gpio-default { + mux { + function = "gpio0"; + groups = "gpio0_22_grp", "gpio0_23_grp"; + }; + + conf { + groups = "gpio0_22_grp", "gpio0_23_grp"; + slew-rate = ; + power-source = ; + }; + + mux-msp { + function = "gpio0"; + groups = "gpio0_13_grp", "gpio0_38_grp"; + }; + + conf-msp { + groups = "gpio0_13_grp", "gpio0_38_grp"; + slew-rate = ; + power-source = ; + }; + + conf-pull-up { + pins = "MIO22"; + bias-pull-up; + }; + + conf-pull-none { + pins = "MIO13", "MIO23", "MIO38"; + bias-disable; + }; + }; +}; + &psgtr { status = "okay"; /* nc, sata, usb3, dp */ @@ -682,20 +962,28 @@ &sata { &sdhci1 { status = "okay"; no-1-8-v; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci1_default>; xlnx,mio-bank = <1>; }; &uart0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0_default>; }; &uart1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; }; /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; dr_mode = "host"; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts index 68b758e40f80..2e9fe675a718 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU111 * - * (C) Copyright 2017 - 2019, Xilinx, Inc. + * (C) Copyright 2017 - 2021, Xilinx, Inc. * * Michal Simek */ @@ -13,6 +13,7 @@ #include "zynqmp-clk-ccf.dtsi" #include #include +#include #include / { @@ -166,6 +167,8 @@ &gem3 { status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem3_default>; phy0: ethernet-phy@c { reg = <0xc>; ti,rx-internal-delay = <0x8>; @@ -177,11 +180,18 @@ phy0: ethernet-phy@c { &gpio { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_default>; }; &i2c0 { status = "okay"; clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c0_default>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; tca6416_u22: gpio@20 { compatible = "ti,tca6416"; @@ -357,6 +367,11 @@ i2c@3 { &i2c1 { status = "okay"; clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; i2c-mux@74 { /* u26 */ compatible = "nxp,pca9548"; @@ -545,6 +560,210 @@ i2c@7 { }; }; +&pinctrl0 { + status = "okay"; + pinctrl_i2c0_default: i2c0-default { + mux { + groups = "i2c0_3_grp"; + function = "i2c0"; + }; + + conf { + groups = "i2c0_3_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_i2c0_gpio: i2c0-gpio { + mux { + groups = "gpio0_14_grp", "gpio0_15_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_14_grp", "gpio0_15_grp"; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_i2c1_default: i2c1-default { + mux { + groups = "i2c1_4_grp"; + function = "i2c1"; + }; + + conf { + groups = "i2c1_4_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + mux { + groups = "gpio0_16_grp", "gpio0_17_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_16_grp", "gpio0_17_grp"; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_uart0_default: uart0-default { + mux { + groups = "uart0_4_grp"; + function = "uart0"; + }; + + conf { + groups = "uart0_4_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO18"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO19"; + bias-disable; + }; + }; + + pinctrl_usb0_default: usb0-default { + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + + conf { + groups = "usb0_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO52", "MIO53", "MIO55"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", + "MIO60", "MIO61", "MIO62", "MIO63"; + bias-disable; + }; + }; + + pinctrl_gem3_default: gem3-default { + mux { + function = "ethernet3"; + groups = "ethernet3_0_grp"; + }; + + conf { + groups = "ethernet3_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74", + "MIO75"; + bias-high-impedance; + low-power-disable; + }; + + conf-tx { + pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68", + "MIO69"; + bias-disable; + low-power-enable; + }; + + mux-mdio { + function = "mdio3"; + groups = "mdio3_0_grp"; + }; + + conf-mdio { + groups = "mdio3_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + }; + + pinctrl_sdhci1_default: sdhci1-default { + mux { + groups = "sdio1_0_grp"; + function = "sdio1"; + }; + + conf { + groups = "sdio1_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + + mux-cd { + groups = "sdio1_cd_0_grp"; + function = "sdio1_cd"; + }; + + conf-cd { + groups = "sdio1_cd_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_gpio_default: gpio-default { + mux { + function = "gpio0"; + groups = "gpio0_22_grp", "gpio0_23_grp"; + }; + + conf { + groups = "gpio0_22_grp", "gpio0_23_grp"; + slew-rate = ; + power-source = ; + }; + + mux-msp { + function = "gpio0"; + groups = "gpio0_13_grp", "gpio0_38_grp"; + }; + + conf-msp { + groups = "gpio0_13_grp", "gpio0_38_grp"; + slew-rate = ; + power-source = ; + }; + + conf-pull-up { + pins = "MIO22"; + bias-pull-up; + }; + + conf-pull-none { + pins = "MIO13", "MIO23", "MIO38"; + bias-disable; + }; + }; +}; + &psgtr { status = "okay"; /* nc, sata, usb3, dp */ @@ -574,17 +793,23 @@ &sata { /* SD1 with level shifter */ &sdhci1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci1_default>; no-1-8-v; xlnx,mio-bank = <1>; }; &uart0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0_default>; }; /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; dr_mode = "host"; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index 302ca0196c34..f860e90ea2a6 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -193,6 +193,11 @@ zynqmp_reset: reset-controller { compatible = "xlnx,zynqmp-reset"; #reset-cells = <1>; }; + + pinctrl0: pinctrl { + compatible = "xlnx,zynqmp-pinctrl"; + status = "disabled"; + }; }; }; -- 2.32.0