Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
MIME-Version: 1.0
References: <20210615074543.26700-1-bhupesh.sharma@linaro.org>
 <20210615074543.26700-11-bhupesh.sharma@linaro.org> <0b012d77-8d61-f852-f455-8b6cceb03ebf@somainline.org>
In-Reply-To: <0b012d77-8d61-f852-f455-8b6cceb03ebf@somainline.org>
From:   Bhupesh Sharma <bhupesh.sharma@linaro.org>
Date:   Tue, 15 Jun 2021 22:30:39 +0530
Message-ID: <CAH=2NtzOzA9HmxFUUuhX9Vy=KW3iRSx5HiuD9Cf11v+eijEWsQ@mail.gmail.com>
Subject: Re: [PATCH v2 10/10] arm64: dts: qcom: sa8155p-adp: Add base dts file
To:     Konrad Dybcio <konrad.dybcio@somainline.org>
Cc:     linux-arm-msm@vger.kernel.org, bhupesh.linux@gmail.com,
        "open list:GPIO SUBSYSTEM" <linux-gpio@vger.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
        devicetree <devicetree@vger.kernel.org>,
        Linus Walleij <linus.walleij@linaro.org>,
        Liam Girdwood <lgirdwood@gmail.com>,
        Mark Brown <broonie@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Vinod Koul <vkoul@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Andy Gross <agross@kernel.org>
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

Hi Konrad,

Thanks for the review.

On Tue, 15 Jun 2021 at 20:23, Konrad Dybcio
<konrad.dybcio@somainline.org> wrote:
>
> Hi,
>
>
> > +
> > +     reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
> > +
> > +     vcc-supply = <&vreg_l10a_2p96>;
> > +     vcc-max-microamp = <750000>;
> > +     vccq-supply = <&vreg_l5c_1p2>;
> > +     vccq-max-microamp = <700000>;
> > +     vccq2-supply = <&vreg_s4a_1p8>;
> > +     vccq2-max-microamp = <750000>;
>
> You need to add "regulator-allow-set-load;" to the mentioned supplies,
>
> as you're controlling the amperage here.

Ok, I will fix this in v3.

> > +};
> > +
> > +&ufs_mem_phy {
> > +     status = "okay";
> > +
> > +     vdda-phy-supply = <&vreg_l8c_1p2>;
> > +     vdda-max-microamp = <87100>;
> > +     vdda-pll-supply = <&vreg_l5a_0p88>;
> > +     vdda-pll-max-microamp = <18300>;
>
> Ditto

Sure, I will fix it in v3.

Thanks,
Bhupesh