Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Subject: Re: [PATCH 1/2] clocksource/drivers/exynos_mct: Prioritise Arm arch
 timer on arm64
To:     Marek Szyprowski <m.szyprowski@samsung.com>,
        Will Deacon <will@kernel.org>,
        Chanwoo Choi <cw00.choi@samsung.com>
Cc:     linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        Krzysztof Kozlowski <krzk@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
        Thomas Gleixner <tglx@linutronix.de>
References: <20210608154341.10794-1-will@kernel.org>
 <CGME20210608154400epcas1p1b22fd50629611a9475cb4d2b8dd9442d@epcas1p1.samsung.com>
 <20210608154341.10794-2-will@kernel.org>
 <466bfc19-2260-87c6-c458-b43cf23617e3@samsung.com>
 <2a0181ea-a26e-65e9-16f6-cc233b6b296f@linaro.org>
 <fbcd234d-3ea0-d609-1f1d-b557ea329c37@samsung.com>
 <20210617214748.GC25403@willie-the-truck>
 <d79ebd58-1c4e-834c-fc06-482f25f6f3de@linaro.org>
 <95fb8ea3-f409-55ee-6b5c-f19858dd0fab@samsung.com>
From:   Daniel Lezcano <daniel.lezcano@linaro.org>
Message-ID: <6847bb2f-02ac-35a4-bb7a-491a52325a60@linaro.org>
Date:   Mon, 21 Jun 2021 12:24:44 +0200
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101
 Thunderbird/78.8.1
MIME-Version: 1.0
In-Reply-To: <95fb8ea3-f409-55ee-6b5c-f19858dd0fab@samsung.com>
Content-Type: text/plain; charset=utf-8
Content-Language: en-US
Content-Transfer-Encoding: 8bit
Precedence: bulk

On 21/06/2021 12:17, Marek Szyprowski wrote:

[ ... ]

>>>>>> I'm not sure that exynos mct is working without problem
>>>>>> such as the case of 6282edb72bed.
>>>>>> As described on On ,6282edb72bed the arch timer on exynos SoC
>>>>>> depends on Exynos MCT device. the arch timer is not able to work
>>>>>> without Exynos MCT because of using the common module.
>>>>> Is it possible to change the DT to have a phandle to the exynos_mct, so
>>>>> it will be probed before the arch_arm_timer ?
>>>> I think that DT changes is not proper way to keep the order between
>>>> exynos_mct and arch timer.
>>> exynos4_mct_frc_start() is called unconditionally from probe via
>>> exynos4_clocksource_init() so as long as the mct probes first, then the
>>> arch timer should work, no? The rating shouldn't affect that.
>> How do you ensure the exynos mct is probed before the arch timer ?
>>
>> The Makefile provides the right order, but the dependency is implicit.
> 
> In my test systems based on Exynos5433, the bootloader enabled MCT, so 
> kernel can also start with arch_timer then switch to MCT. The probe 
> order also depend on the order of DT nodes, so with the current dts MCT 
> is probed first. This is not the best approach, but so far it works.

Right, generally assuming the firmware is doing the right thing from an
initialization POV is not a good idea :/

But in our case, as pointed by Will, the cpuhotplug ordering gives the
right sequence. So it should be fine.


-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog