Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932669AbWKJMMp (ORCPT ); Fri, 10 Nov 2006 07:12:45 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932853AbWKJMMp (ORCPT ); Fri, 10 Nov 2006 07:12:45 -0500 Received: from systemlinux.org ([83.151.29.59]:22724 "EHLO m18s25.vlinux.de") by vger.kernel.org with ESMTP id S932669AbWKJMMn (ORCPT ); Fri, 10 Nov 2006 07:12:43 -0500 Date: Fri, 10 Nov 2006 13:11:51 +0100 From: Andre Noll To: ak@suse.de, discuss@x86-64.org, linux-kernel@vger.kernel.org Subject: 2.6.19-rc5: Bad page state in process 'swapper' Message-ID: <20061110121151.GC29040@skl-net.de> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="LpQ9ahxlCli8rRTG" Content-Disposition: inline User-Agent: Mutt/1.5.9i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 31708 Lines: 811 --LpQ9ahxlCli8rRTG Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hi just tried to boot 2.6.19-rc5 on a 2-way opteron 250 with 8G Ram: Any hints? Andre eded Backtrace: Call Trace: [] bad_page+0x58/0x82 [] free_hot_cold_page+0x73/0x10f [] free_all_bootmem_core+0x101/0x1c2 [] numa_free_all_bootmem+0x39/0x78 [] mem_init+0x59/0x16c [] start_kernel+0x165/0x1e7 [] x86_64_start_kernel+0x12b/0x130 Bad page state in process 'swapper' page:ffff810003fb2660 flags:0x0000000000000000 mapping:0000000000000000 map= count:1 count:0 Trying to fix it up, but a reboot is needed Backtrace: Call Trace: [] bad_page+0x58/0x82 [] free_hot_cold_page+0x73/0x10f [] free_all_bootmem_core+0x101/0x1c2 [] numa_free_all_bootmem+0x39/0x78 [] mem_init+0x59/0x16c [] start_kernel+0x165/0x1e7 [] x86_64_start_kernel+0x12b/0x130 Bad page state in process 'swapper' page:ffff810003fb2698 flags:0x0000000000000000 mapping:0000000000000000 map= count:1 count:0 Trying to fix it up, but a reboot is needed Backtrace: Call Trace: [] bad_page+0x58/0x82 [] free_hot_cold_page+0x73/0x10f [] free_all_bootmem_core+0x101/0x1c2 [] numa_free_all_bootmem+0x39/0x78 [] mem_init+0x59/0x16c [] start_kernel+0x165/0x1e7 [] x86_64_start_kernel+0x12b/0x130 Bad page state in process 'swapper' page:ffff810003fb26d0 flags:0x0000000000000000 mapping:0000000000000000 map= count:1 count:0 Trying to fix it up, but a reboot is needed Backtrace: Call Trace: [] bad_page+0x58/0x82 [] free_hot_cold_page+0x73/0x10f [] free_all_bootmem_core+0x101/0x1c2 [] numa_free_all_bootmem+0x39/0x78 [] mem_init+0x59/0x16c [] start_kernel+0x165/0x1e7 [] x86_64_start_kernel+0x12b/0x130 Bad page state in process 'swapper' page:ffff810003fb2708 flags:0x0000000000000000 mapping:0000000000000000 map= count:1 count:0 Trying to fix it up, but a reboot is needed Backtrace: Call Trace: [] bad_page+0x58/0x82 [] free_hot_cold_page+0x73/0x10f [] free_all_bootmem_core+0x101/0x1c2 [] numa_free_all_bootmem+0x39/0x78 [] mem_init+0x59/0x16c [] start_kernel+0x165/0x1e7 [] x86_64_start_kernel+0x12b/0x130 Bad page state in process 'swapper' page:ffff810003fb2740 flags:0x0000000000000000 mapping:0000000000000000 map= count:1 count:0 Trying to fix it up, but a reboot is needed Backtrace: Call Trace: [] bad_page+0x58/0x82 [] free_hot_cold_page+0x73/0x10f [] free_all_bootmem_core+0x101/0x1c2 [] numa_free_all_bootmem+0x39/0x78 [] mem_init+0x59/0x16c [] start_kernel+0x165/0x1e7 [] x86_64_start_kernel+0x12b/0x130 Bad page state in process 'swapper' page:ffff810003fb2778 flags:0x0000000000000000 mapping:0000000000000000 map= count:1 count:0 Trying to fix it up, but a reboot is needed Backtrace: Call Trace: [] bad_page+0x58/0x82 [] free_hot_cold_page+0x73/0x10f [] free_all_bootmem_core+0x101/0x1c2 [] numa_free_all_bootmem+0x39/0x78 [] mem_init+0x59/0x16c [] start_kernel+0x165/0x1e7 [] x86_64_start_kernel+0x12b/0x130 Bad page state in process 'swapper' page:ffff810003fb27b0 flags:0x0000000000000000 mapping:0000000000000000 map= count:1 count:0 Trying to fix it up, but a reboot is needed Backtrace: Call Trace: [] bad_page+0x58/0x82 [] free_hot_cold_page+0x73/0x10f [] free_all_bootmem_core+0x101/0x1c2 [] numa_free_all_bootmem+0x39/0x78 [] mem_init+0x59/0x16c [] start_kernel+0x165/0x1e7 [] x86_64_start_kernel+0x12b/0x130 Bad page state in process 'swapper' page:ffff810003fb27e8 flags:0x0000000000000000 mapping:0000000000000000 map= count:1 count:0 Trying to fix it up, but a reboot is needed Backtrace: Call Trace: [] bad_page+0x58/0x82 [] free_hot_cold_page+0x73/0x10f [] free_all_bootmem_core+0x101/0x1c2 [] numa_free_all_bootmem+0x39/0x78 [] mem_init+0x59/0x16c [] start_kernel+0x165/0x1e7 [] x86_64_start_kernel+0x12b/0x130 Bad page state in process 'swapper' page:ffff810003fb2820 flags:0x0000000000000000 mapping:0000000000000000 map= count:1 count:0 Trying to fix it up, but a reboot is needed Backtrace: Call Trace: [] bad_page+0x58/0x82 [] free_hot_cold_page+0x73/0x10f [] free_all_bootmem_core+0x101/0x1c2 [] numa_free_all_bootmem+0x39/0x78 [] mem_init+0x59/0x16c [] start_kernel+0x165/0x1e7 [] x86_64_start_kernel+0x12b/0x130 Bad page state in process 'swapper' page:ffff810003fb2858 flags:0x0000000000000000 mapping:0000000000000000 map= count:1 count:0 Trying to fix it up, but a reboot is needed Backtrace: Call Trace: [] bad_page+0x58/0x82 [] free_hot_cold_page+0x73/0x10f [] free_all_bootmem_core+0x101/0x1c2 [] numa_free_all_bootmem+0x39/0x78 [] mem_init+0x59/0x16c [] start_kernel+0x165/0x1e7 [] x86_64_start_kernel+0x12b/0x130 Bad page state in process 'swapper' page:ffff810003fb2890 flags:0x0000000000000000 mapping:0000000000000000 map= count:1 count:0 Trying to fix it up, but a reboot is needed Backtrace: Call Trace: [] bad_page+0x58/0x82 [] free_hot_cold_page+0x73/0x10f [] free_all_bootmem_core+0x101/0x1c2 [] numa_free_all_bootmem+0x39/0x78 [] mem_init+0x59/0x16c [] start_kernel+0x165/0x1e7 [] x86_64_start_kernel+0x12b/0x130 Bad page state in process 'swapper' page:ffff810003fb28c8 flags:0x0000000000000000 mapping:0000000000000000 map= count:1 count:0 Trying to fix it up, but a reboot is needed Backtrace: Call Trace: [] bad_page+0x58/0x82 [] free_hot_cold_page+0x73/0x10f [] free_all_bootmem_core+0x101/0x1c2 [] numa_free_all_bootmem+0x39/0x78 [] mem_init+0x59/0x16c [] start_kernel+0x165/0x1e7 [] x86_64_start_kernel+0x12b/0x130 Bad page state in process 'swapper' page:ffff810003fb2900 flags:0x0000000000000000 mapping:0000000000000000 map= count:1 count:0 Trying to fix it up, but a reboot is needed Backtrace: Call Trace: [] bad_page+0x58/0x82 [] free_hot_cold_page+0x73/0x10f [] free_all_bootmem_core+0x101/0x1c2 [] numa_free_all_bootmem+0x39/0x78 [] mem_init+0x59/0x16c [] start_kernel+0x165/0x1e7 [] x86_64_start_kernel+0x12b/0x130 Bad page state in process 'swapper' page:ffff810003fb2938 flags:0x0000000000000000 mapping:0000000000000000 map= count:1 count:0 Trying to fix it up, but a reboot is needed Backtrace: Call Trace: [] bad_page+0x58/0x82 [] free_hot_cold_page+0x73/0x10f [] free_all_bootmem_core+0x101/0x1c2 [] numa_free_all_bootmem+0x39/0x78 [] mem_init+0x59/0x16c [] start_kernel+0x165/0x1e7 [] x86_64_start_kernel+0x12b/0x130 Bad page state in process 'swapper' page:ffff810003fb2970 flags:0x0000000000000000 mapping:0000000000000000 map= count:1 count:0 Trying to fix it up, but a reboot is needed Backtrace: Call Trace: [] bad_page+0x58/0x82 [] free_hot_cold_page+0x73/0x10f [] free_all_bootmem_core+0x101/0x1c2 [] numa_free_all_bootmem+0x39/0x78 [] mem_init+0x59/0x16c [] start_kernel+0x165/0x1e7 [] x86_64_start_kernel+0x12b/0x130 Bad page state in process 'swapper' page:ffff810003fb29a8 flags:0x0000000000000000 mapping:0000000000000000 map= count:1 count:0 Trying to fix it up, but a reboot is needed Backtrace: Call Trace: [] bad_page+0x58/0x82 [] free_hot_cold_page+0x73/0x10f [] free_all_bootmem_core+0x101/0x1c2 [] numa_free_all_bootmem+0x39/0x78 [] mem_init+0x59/0x16c [] start_kernel+0x165/0x1e7 [] x86_64_start_kernel+0x12b/0x130 Bad page state in process 'swapper' page:ffff810003fb29e0 flags:0x0000000000000000 mapping:0000000000000000 map= count:1 count:0 Trying to fix it up, but a reboot is needed Backtrace: Call Trace: [] bad_page+0x58/0x82 [] free_hot_cold_page+0x73/0x10f [] free_all_bootmem_core+0x101/0x1c2 [] numa_free_all_bootmem+0x39/0x78 [] mem_init+0x59/0x16c [] start_kernel+0x165/0x1e7 [] x86_64_start_kernel+0x12b/0x130 Bad page state in process 'swapper' page:ffff810003fb2a18 flags:0x0000000000000000 mapping:0000000000000000 map= count:1 count:0 Trying to fix it up, but a reboot is needed Backtrace: Call Trace: [] bad_page+0x58/0x82 [] free_hot_cold_page+0x73/0x10f [] free_all_bootmem_core+0x101/0x1c2 [] numa_free_all_bootmem+0x39/0x78 [] mem_init+0x59/0x16c [] start_kernel+0x165/0x1e7 [] x86_64_start_kernel+0x12b/0x130 Bad page state in process 'swapper' page:ffff810003fb2a50 flags:0x0000000000000000 mapping:0000000000000000 map= count:1 count:0 Trying to fix it up, but a reboot is needed Backtrace: Call Trace: [] bad_page+0x58/0x82 [] free_hot_cold_page+0x73/0x10f [] free_all_bootmem_core+0x101/0x1c2 [] numa_free_all_bootmem+0x39/0x78 [] mem_init+0x59/0x16c [] start_kernel+0x165/0x1e7 [] x86_64_start_kernel+0x12b/0x130 Bad page state in process 'swapper' page:ffff810003fb2a88 flags:0x0000000000000000 mapping:0000000000000000 map= count:1 count:0 Trying to fix it up, but a reboot is needed Backtrace: Call Trace: [] bad_page+0x58/0x82 [] free_hot_cold_page+0x73/0x10f [] free_all_bootmem_core+0x101/0x1c2 [] numa_free_all_bootmem+0x39/0x78 [] mem_init+0x59/0x16c [] start_kernel+0x165/0x1e7 [] x86_64_start_kernel+0x12b/0x130 Bad page state in process 'swapper' page:ffff810003fb2ac0 flags:0x0000000000000000 mapping:0000000000000000 map= count:1 count:0 Trying to fix it up, but a reboot is needed Backtrace: Call Trace: [] bad_page+0x58/0x82 [] free_hot_cold_page+0x73/0x10f [] free_all_bootmem_core+0x101/0x1c2 [] numa_free_all_bootmem+0x39/0x78 [] mem_init+0x59/0x16c [] start_kernel+0x165/0x1e7 [] x86_64_start_kernel+0x12b/0x130 Bad page state in process 'swapper' page:ffff810003fb2af8 flags:0x0000000000000000 mapping:0000000000000000 map= count:1 count:0 Trying to fix it up, but a reboot is needed Backtrace: Call Trace: [] bad_page+0x58/0x82 [] free_hot_cold_page+0x73/0x10f [] free_all_bootmem_core+0x101/0x1c2 [] numa_free_all_bootmem+0x39/0x78 [] mem_init+0x59/0x16c [] start_kernel+0x165/0x1e7 [] x86_64_start_kernel+0x12b/0x130 Bad page state in process 'swapper' page:ffff810003fb2b30 flags:0x0000000000000000 mapping:0000000000000000 map= count:1 count:0 Trying to fix it up, but a reboot is needed Backtrace: Call Trace: [] bad_page+0x58/0x82 [] free_hot_cold_page+0x73/0x10f [] free_all_bootmem_core+0x101/0x1c2 [] numa_free_all_bootmem+0x39/0x78 [] mem_init+0x59/0x16c [] start_kernel+0x165/0x1e7 [] x86_64_start_kernel+0x12b/0x130 Bad page state in process 'swapper' page:ffff810003fb2b68 flags:0x0000000000000000 mapping:0000000000000000 map= count:1 count:0 Trying to fix it up, but a reboot is needed Backtrace: Call Trace: [] bad_page+0x58/0x82 [] free_hot_cold_page+0x73/0x10f [] free_all_bootmem_core+0x101/0x1c2 [] numa_free_all_bootmem+0x39/0x78 [] mem_init+0x59/0x16c [] start_kernel+0x165/0x1e7 [] x86_64_start_kernel+0x12b/0x130 Bad page state in process 'swapper' page:ffff810003fb2ba0 flags:0x0000000000000000 mapping:0000000000000000 map= count:1 count:0 Trying to fix it up, but a reboot is needed Backtrace: Call Trace: [] bad_page+0x58/0x82 [] free_hot_cold_page+0x73/0x10f [] free_all_bootmem_core+0x101/0x1c2 [] numa_free_all_bootmem+0x39/0x78 [] mem_init+0x59/0x16c [] start_kernel+0x165/0x1e7 [] x86_64_start_kernel+0x12b/0x130 Bad page state in process 'swapper' page:ffff810003fb2bd8 flags:0x0000000000000000 mapping:0000000000000000 map= count:1 count:0 Trying to fix it up, but a reboot is needed Backtrace: Call Trace: [] bad_page+0x58/0x82 [] free_hot_cold_page+0x73/0x10f [] free_all_bootmem_core+0x101/0x1c2 [] numa_free_all_bootmem+0x39/0x78 [] mem_init+0x59/0x16c [] start_kernel+0x165/0x1e7 [] x86_64_start_kernel+0x12b/0x130 Bad page state in process 'swapper' page:ffff810003fb2c10 flags:0x0000000000000000 mapping:0000000000000000 map= count:1 count:0 Trying to fix it up, but a reboot is needed Backtrace: Call Trace: [] bad_page+0x58/0x82 [] free_hot_cold_page+0x73/0x10f [] free_all_bootmem_core+0x101/0x1c2 [] numa_free_all_bootmem+0x39/0x78 [] mem_init+0x59/0x16c [] start_kernel+0x165/0x1e7 [] x86_64_start_kernel+0x12b/0x130 Bad page state in process 'swapper' page:ffff810003fb2c48 flags:0x0000000000000000 mapping:0000000000000000 map= count:1 count:0 Trying to fix it up, but a reboot is needed Backtrace: Call Trace: [] bad_page+0x58/0x82 [] free_hot_cold_page+0x73/0x10f [] free_all_bootmem_core+0x101/0x1c2 [] numa_free_all_bootmem+0x39/0x78 [] mem_init+0x59/0x16c [] start_kernel+0x165/0x1e7 [] x86_64_start_kernel+0x12b/0x130 Memory: 8122880k/8388608k available (3184k kernel code, 199740k reserved, 1= 490k data, 2612k init) Calibrating delay using timer specific routine.. 4784.56 BogoMIPS (lpj=3D95= 69128) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0/0 -> Node 0 Freeing SMP alternatives: 32k freed ACPI: Core revision 20060707 Using local APIC timer interrupts. result 12447835 Detected 12.447 MHz APIC timer. Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4780.20 BogoMIPS (lpj=3D95= 60414) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1/1 -> Node 1 AMD Opteron(tm) Processor 250 stepping 0a CPU 1: Syncing TSC to CPU 0. CPU 1: synchronized TSC with CPU 0 (last diff -8 cycles, maxerr 1201 cycles) Brought up 2 CPUs testing NMI watchdog ... OK. Disabling vsyscall due to use of PM timer time.c: Using 3.579545 MHz WALL PM GTOD PM timer. time.c: Detected 2389.977 MHz processor. migration_cost=3D550 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:03:06.0 PCI: Firmware left 0000:03:08.0 e100 interrupts enabled, disabling ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) AMD768 RNG detected SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=3Drouteirq". If it helps, post a r= eport PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 8000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture PCI: Bridge: 0000:00:06.0 IO window: a000-bfff MEM window: fc900000-feafffff PREFETCH window: disabled. PCI: Bridge: 0000:00:0a.0 IO window: 9000-9fff MEM window: fc600000-fc8fffff PREFETCH window: ff500000-ff5fffff PCI: Bridge: 0000:00:0b.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered microcode: CPU0 not a capable Intel processor microcode: CPU1 not a capable Intel processor IA-32 Microcode Update Driver: v1.14a io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: Getting cpuindex for acpiid 0x3 ACPI: Getting cpuindex for acpiid 0x4 Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones ipmi message handler version 39.0 ipmi device interface IPMI System Interface driver. ipmi_si: Unable to find any System Interface(s) IPMI Watchdog: driver initialized Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq =3D 3) is a 16550A loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 7.2.9-k4 Copyright (c) 1999-2006 Intel Corporation. eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepr= o100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 18 (level, low) -> IRQ 18 eth0: 0000:03:08.0, 00:E0:81:2E:78:F7, IRQ 18. Board assembly 567812-052, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0xd0a6c714). e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation tg3.c:v3.68 (November 02, 2006) ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 24 (level, low) -> IRQ 24 eth1: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 1= 0/100/1000BaseT Ethernet 00:e0:81:2e:79:26 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap= [1]=20 eth1: dma_rwctrl[769f4000] dma_mask[64-bit] ACPI: PCI Interrupt 0000:02:09.1[B] -> GSI 25 (level, low) -> IRQ 25 eth2: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 1= 0/100/1000BaseT Ethernet 00:e0:81:2e:79:27 eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap= [1]=20 eth2: dma_rwctrl[769f4000] dma_mask[64-bit] Linux video capture interface: v2.00 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=3D= xx AMD8111: IDE controller at PCI slot 0000:00:07.1 AMD8111: chipset revision 3 AMD8111: not 100% native mode: will probe irqs later AMD8111: 0000:00:07.1 (rev 03) UDMA133 controller ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... Probing IDE interface ide1... Probing IDE interface ide0... Probing IDE interface ide1... ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 24 (level, low) -> IRQ 24 scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0 aic7902: Ultra320 Wide Channel A, SCSI Id=3D7, PCI-X 67-100Mhz, 512= SCBs scsi 0:0:0:0: Direct-Access FUJITSU MAT3073NP 0105 PQ: 0 ANSI: 3 target0:0:0: asynchronous scsi0:A:0:0: Tagged Queuing enabled. Depth 32 target0:0:0: Beginning Domain Validation target0:0:0: wide asynchronous target0:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RDSTRM RTI WRFLOW PCO= MP (6.25 ns, offset 127) target0:0:0: Ending Domain Validation scsi 0:0:1:0: Direct-Access FUJITSU MAT3073NP 0105 PQ: 0 ANSI: 3 target0:0:1: asynchronous scsi0:A:1:0: Tagged Queuing enabled. Depth 32 target0:0:1: Beginning Domain Validation target0:0:1: wide asynchronous target0:0:1: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RDSTRM RTI WRFLOW PCO= MP (6.25 ns, offset 127) target0:0:1: Ending Domain Validation ACPI: PCI Interrupt 0000:02:06.1[B] -> GSI 25 (level, low) -> IRQ 25 scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0 aic7902: Ultra320 Wide Channel B, SCSI Id=3D7, PCI-X 67-100Mhz, 512= SCBs 3ware Storage Controller device driver for Linux v1.26.02.001. 3ware 9000 Storage Controller device driver for Linux v2.26.02.007. SCSI device sda: 143638992 512-byte hdwr sectors (73543 MB) sda: Write Protect is off sda: Mode Sense: b3 00 00 08 SCSI device sda: drive cache: write back SCSI device sda: 143638992 512-byte hdwr sectors (73543 MB) sda: Write Protect is off sda: Mode Sense: b3 00 00 08 SCSI device sda: drive cache: write back sda: sda1 sda2 sd 0:0:0:0: Attached scsi disk sda SCSI device sdb: 143638992 512-byte hdwr sectors (73543 MB) sdb: Write Protect is off sdb: Mode Sense: b3 00 00 08 SCSI device sdb: drive cache: write back SCSI device sdb: 143638992 512-byte hdwr sectors (73543 MB) sdb: Write Protect is off sdb: Mode Sense: b3 00 00 08 SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 sd 0:0:1:0: Attached scsi disk sdb sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:1:0: Attached scsi generic sg1 type 0 Fusion MPT base driver 3.04.02 Copyright (c) 1999-2005 LSI Logic Corporation Fusion MPT SPI Host driver 3.04.02 usbmon: debugfs is not available ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt 0000:03:00.0[D] -> GSI 19 (level, low) -> IRQ 19 ohci_hcd 0000:03:00.0: OHCI Host Controller ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:03:00.0: irq 19, io mem 0xfeafc000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ACPI: PCI Interrupt 0000:03:00.1[D] -> GSI 19 (level, low) -> IRQ 19 ohci_hcd 0000:03:00.1: OHCI Host Controller ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 2 ohci_hcd 0000:03:00.1: irq 19, io mem 0xfeafd000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected USB Universal Host Controller Interface driver v3.0 Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid /.amd_mnt/huangho/export/kwaid0/home/maan/scm/torvalds/linux-2.6/drivers/us= b/input/hid-core.c: v2.6:USB HID core driver serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input0 input: AT Translated Set 2 keyboard as /class/input/input1 md: raid0 personality registered for level 0 md: multipath personality registered for level -4 TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 CCID: Registered CCID 3 (ccid3) CCID: Registered CCID 2 (ccid2) SCTP: Hash tables configured (established 65536 bind 65536) powernow-k8: Found 2 AMD Opteron(tm) Processor 250 processors (version 2.00= =2E00) powernow-k8: MP systems not supported by PSB BIOS structure powernow-k8: MP systems not supported by PSB BIOS structure PM: Writing back config space on device 0000:02:09.0 at offset b (was 16481= 4e4, writing 164414e4) PM: Writing back config space on device 0000:02:09.0 at offset 3 (was 80400= 0, writing 804010) PM: Writing back config space on device 0000:02:09.0 at offset 2 (was 20000= 00, writing 2000003) PM: Writing back config space on device 0000:02:09.0 at offset 1 (was 2b000= 00, writing 2b00146) PM: Writing back config space on device 0000:02:09.1 at offset b (was 16481= 4e4, writing 164414e4) PM: Writing back config space on device 0000:02:09.1 at offset 3 (was 80400= 0, writing 804010) PM: Writing back config space on device 0000:02:09.1 at offset 2 (was 20000= 00, writing 2000003) PM: Writing back config space on device 0000:02:09.1 at offset 1 (was 2b000= 00, writing 2b00106) Sending DHCP requests .<6>tg3: eth1: Link is up at 1000 Mbps, full duplex. tg3: eth1: Flow control is on for TX and on for RX. =2E, OK IP-Config: Got DHCP answer from 192.168.1.254, my address is 192.168.1.120 PM: Writing back config space on device 0000:02:09.1 at offset b (was 16481= 4e4, writing 164414e4) PM: Writing back config space on device 0000:02:09.1 at offset 3 (was 80400= 0, writing 804010) PM: Writing back config space on device 0000:02:09.1 at offset 2 (was 20000= 00, writing 2000003) PM: Writing back config space on device 0000:02:09.1 at offset 1 (was 2b000= 00, writing 2b00106) IP-Config: Complete: device=3Deth1, addr=3D192.168.1.120, mask=3D255.255.0.0, gw=3D192.168= =2E1.254, host=3Dnode120, domain=3D, nis-domain=3D(none), bootserver=3D192.168.1.254, rootserver=3D192.168.1.254, rootpath=3D Freeing unused kernel memory: 2612k freed program parted is using a deprecated SCSI ioctl, please convert it to SG_IO program parted is using a deprecated SCSI ioctl, please convert it to SG_IO md: md0 stopped. program parted is using a deprecated SCSI ioctl, please convert it to SG_IO program parted is using a deprecated SCSI ioctl, please convert it to SG_IO program parted is using a deprecated SCSI ioctl, please convert it to SG_IO program parted is using a deprecated SCSI ioctl, please convert it to SG_IO program parted is using a deprecated SCSI ioctl, please convert it to SG_IO program parted is using a deprecated SCSI ioctl, please convert it to SG_IO program parted is using a deprecated SCSI ioctl, please convert it to SG_IO program parted is using a deprecated SCSI ioctl, please convert it to SG_IO program parted is using a deprecated SCSI ioctl, please convert it to SG_IO program parted is using a deprecated SCSI ioctl, please convert it to SG_IO md: bind md: bind md0: setting max_sectors to 128, segment boundary to 32767 raid0: looking at sdb2 raid0: comparing sdb2(55038592) with sdb2(55038592) raid0: END raid0: =3D=3D> UNIQUE raid0: 1 zones raid0: looking at sda2 raid0: comparing sda2(55038592) with sdb2(55038592) raid0: EQUAL raid0: FINAL 1 zones raid0: done. raid0 : md_size is 110077184 blocks. raid0 : conf->hash_spacing is 110077184 blocks. raid0 : nb_zone is 1. raid0 : Allocating 8 bytes for hash. program parted is using a deprecated SCSI ioctl, please convert it to SG_IO program parted is using a deprecated SCSI ioctl, please convert it to SG_IO md: md0 stopped. md: unbind md: export_rdev(sdb2) md: unbind md: export_rdev(sda2) program parted is using a deprecated SCSI ioctl, please convert it to SG_IO program parted is using a deprecated SCSI ioctl, please convert it to SG_IO program parted is using a deprecated SCSI ioctl, please convert it to SG_IO program parted is using a deprecated SCSI ioctl, please convert it to SG_IO program parted is using a deprecated SCSI ioctl, please convert it to SG_IO program parted is using a deprecated SCSI ioctl, please convert it to SG_IO program parted is using a deprecated SCSI ioctl, please convert it to SG_IO program parted is using a deprecated SCSI ioctl, please convert it to SG_IO program parted is using a deprecated SCSI ioctl, please convert it to SG_IO program parted is using a deprecated SCSI ioctl, please convert it to SG_IO md: bind md: bind md0: setting max_sectors to 128, segment boundary to 32767 raid0: looking at sdb2 raid0: comparing sdb2(55038592) with sdb2(55038592) raid0: END raid0: =3D=3D> UNIQUE raid0: 1 zones raid0: looking at sda2 raid0: comparing sda2(55038592) with sdb2(55038592) raid0: EQUAL raid0: FINAL 1 zones raid0: done. raid0 : md_size is 110077184 blocks. raid0 : conf->hash_spacing is 110077184 blocks. raid0 : nb_zone is 1. raid0 : Allocating 8 bytes for hash. Adding 16779852k swap on /dev/sda1. Priority:42 extents:1 across:16779852k Adding 16779852k swap on /dev/sdb1. Priority:42 extents:1 across:16779852k warning: process `sensors' used the removed sysctl system call with 7.2.1. warning: process `sensors' used the removed sysctl system call with 7.2.1. process `syslogd' is using obsolete setsockopt SO_BSDCOMPAT --=20 The only person who always got his work done by Friday was Robinson Crusoe --LpQ9ahxlCli8rRTG Content-Type: application/pgp-signature; name="signature.asc" Content-Description: Digital signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (GNU/Linux) iD8DBQFFVGyHWto1QDEAkw8RAqeyAKCrAPMmW7j4muNbVsw6sVH4Q1kX0QCdHeik GY5wL3o7cOOH7nBzzE/famM= =tfmP -----END PGP SIGNATURE----- --LpQ9ahxlCli8rRTG-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/