Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Jian-Hong Pan <jhp@endlessos.org>
To:     Florian Fainelli <f.fainelli@gmail.com>,
        Stefan Wahren <stefan.wahren@i2se.com>,
        Doug Berger <opendmb@gmail.com>
Cc:     Andrew Lunn <andrew@lunn.ch>,
        bcm-kernel-feedback-list@broadcom.com, netdev@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux@endlessos.org,
        linux-rpi-kernel@lists.infradead.org,
        Jian-Hong Pan <jhp@endlessos.org>
Subject: [PATCH v3] net: bcmgenet: Add mdio-bcm-unimac soft dependency
Date:   Thu, 24 Jun 2021 11:22:41 +0800
Message-Id: <20210624032240.2609-1-jhp@endlessos.org>
In-Reply-To: <7f4e15bb-feb5-b4d2-57b9-c2a9b2248d4a@gmail.com>
References: <7f4e15bb-feb5-b4d2-57b9-c2a9b2248d4a@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The Broadcom UniMAC MDIO bus from mdio-bcm-unimac module comes too late.
So, GENET cannot find the ethernet PHY on UniMAC MDIO bus. This leads
GENET fail to attach the PHY as following log:

bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
...
could not attach to PHY
bcmgenet fd580000.ethernet eth0: failed to connect to PHY
uart-pl011 fe201000.serial: no DMA platform data
libphy: bcmgenet MII bus: probed
...
unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus

It is not just coming too late, there is also no way for the module
loader to figure out the dependency between GENET and its MDIO bus
driver unless we provide this MODULE_SOFTDEP hint.

This patch adds the soft dependency to load mdio-bcm-unimac module
before genet module to fix this issue.

Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=213485
Fixes: 9a4e79697009 ("net: bcmgenet: utilize generic Broadcom UniMAC MDIO controller driver")
Signed-off-by: Jian-Hong Pan <jhp@endlessos.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
v3: Modified the subject and added some more description in the commit
    message by Florian's suggestion.

v2: Load mdio-bcm-unimac before genet module instead of trying to
    connect the PHY in a loop.

 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index fcca023f22e5..41f7f078cd27 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -4296,3 +4296,4 @@ MODULE_AUTHOR("Broadcom Corporation");
 MODULE_DESCRIPTION("Broadcom GENET Ethernet controller driver");
 MODULE_ALIAS("platform:bcmgenet");
 MODULE_LICENSE("GPL");
+MODULE_SOFTDEP("pre: mdio-bcm-unimac");
-- 
2.32.0