Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Qing Zhang <zhangqing@loongson.cn>
To:     Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
        Rob Herring <robh+dt@kernel.org>,
        Jiaxun Yang <jiaxun.yang@flygoat.com>,
        Huacai Chen <chenhuacai@kernel.org>
Cc:     devicetree@vger.kernel.org, linux-mips@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: [PATCH v3 2/2] MIPS: Loongson64: DTS: Add pm block node for Loongson-2K1000
Date:   Mon, 28 Jun 2021 22:38:52 +0800
Message-Id: <20210628143852.11504-2-zhangqing@loongson.cn>
In-Reply-To: <20210628143852.11504-1-zhangqing@loongson.cn>
References: <20210628143852.11504-1-zhangqing@loongson.cn>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The module is now supported, enable it.

Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
---
 arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
index 569e814def83..e31176ac0ac2 100644
--- a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
+++ b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
@@ -101,6 +101,15 @@ uart0: serial@1fe00000 {
 			no-loopback-test;
 		};
 
+		pm: power-controller {
+			device_type = "power management";
+			compatible = "loongson, reset-controller";
+			reg = <0 0x1fe0700c 0 0x8>,
+				<0 0x1fe07014 0 0x8>,
+				<0 0x1fe07030 0 0x8>;
+			reg-names = "pm1_sts", "pm1_cnt", "rst_cnt";
+		};
+
 		pci@1a000000 {
 			compatible = "loongson,ls2k-pci";
 			device_type = "pci";
-- 
2.31.0