Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932769AbWKNLbn (ORCPT ); Tue, 14 Nov 2006 06:31:43 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S933409AbWKNLbn (ORCPT ); Tue, 14 Nov 2006 06:31:43 -0500 Received: from tornado.reub.net ([203.222.131.131]:37092 "EHLO tornado.reub.net") by vger.kernel.org with ESMTP id S932769AbWKNLbl convert rfc822-to-8bit (ORCPT ); Tue, 14 Nov 2006 06:31:41 -0500 Message-ID: <4559A91C.10009@reub.net> Date: Tue, 14 Nov 2006 22:31:40 +1100 From: Reuben Farrelly User-Agent: Thunderbird 2.0b1pre (Windows/20061113) MIME-Version: 1.0 To: Andrew Morton , davej@redhat.com CC: linux-kernel@vger.kernel.org Subject: Re: 2.6.19-rc5-mm2 References: <20061114014125.dd315fff.akpm@osdl.org> In-Reply-To: <20061114014125.dd315fff.akpm@osdl.org> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8BIT Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 18898 Lines: 436 On 14/11/2006 8:41 PM, Andrew Morton wrote: > Presently at > > http://userweb.kernel.org/~akpm/2.6.19-rc5-mm2/ > > and will appear later at > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc5/2.6.19-rc5-mm2/ Oops: (davej cc'd - I think it's his specialty) Linux version 2.6.19-rc5-mm2 (root@tornado.reub.net) (gcc version 4.1.1 20061108 (Red Hat 4.1.1-35)) #1 SMP Tue Nov 14 21:56:04 EST 2006 Command line: ro root=/dev/md0 panic=60 console=ttyS0,57600 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f66d000 (usable) BIOS-e820: 000000003f66d000 - 000000003f6e8000 (ACPI NVS) BIOS-e820: 000000003f6e8000 - 000000003f6ec000 (usable) BIOS-e820: 000000003f6ec000 - 000000003f6ff000 (ACPI data) BIOS-e820: 000000003f6ff000 - 000000003f700000 (usable) end_pfn_map = 259840 DMI 2.3 present. Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 early_node_map[4] active PFN ranges 0: 0 -> 159 0: 256 -> 259693 0: 259816 -> 259820 0: 259839 -> 259840 ACPI: PM-Timer IO Port: 0x408 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Setting APIC routing to flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Nosave address range: 000000000009f000 - 00000000000a0000 Nosave address range: 00000000000a0000 - 00000000000e0000 Nosave address range: 00000000000e0000 - 0000000000100000 Nosave address range: 000000003f66d000 - 000000003f6e8000 Nosave address range: 000000003f6ec000 - 000000003f6ff000 Allocating PCI resources starting at 40000000 (gap: 3f700000:c0900000) PERCPU: Allocating 33920 bytes of per cpu data Built 1 zonelists. Total pages: 253902 Kernel command line: ro root=/dev/md0 panic=60 console=ttyS0,57600 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Console: colour VGA+ 80x25 Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 30 ... MAX_LOCKDEP_KEYS: 2048 ... CLASSHASH_SIZE: 1024 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 8192 ... CHAINHASH_SIZE: 4096 memory used by lock dependency info: 1328 kB per task-struct memory footprint: 1680 bytes Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Checking aperture... Memory: 1011700k/1039360k available (2635k kernel code, 25964k reserved, 1784k data, 240k init) Calibrating delay using timer specific routine.. 6007.58 BogoMIPS (lpj=12015160) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM1) Freeing SMP alternatives: 28k freed ACPI: Core revision 20060707 Using local APIC timer interrupts. result 12500426 Detected 12.500 MHz APIC timer. lockdep: not fixing up alternatives. Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 5999.97 BogoMIPS (lpj=11999958) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU1: Thermal monitoring enabled (TM1) Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03 Brought up 2 CPUs testing NMI watchdog ... OK. time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer. time.c: Detected 3000.112 MHz processor. migration_cost=9 checking if image is initramfs... it is Freeing initrd memory: 1238k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 0500-053f claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *9 10 11 12) intel_rng: FWH not detected SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz PCI-GART: No AMD northbridge found. PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:1c.0 IO window: 2000-2fff MEM window: 48100000-481fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.2 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.3 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.4 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.5 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: 1000-1fff MEM window: 48000000-480fffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17 ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) IPv4 FIB: Using LC-trie version 0.407 TCP established hash table entries: 65536 (order: 9, 3670016 bytes) TCP bind hash table entries: 32768 (order: 8, 1835008 bytes) TCP: Hash tables configured (established 65536 bind 32768) TCP reno registered audit: initializing netlink socket (disabled) audit(1163502407.084:1): initialized SELinux: Registering netfilter hooks io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered (default) assign_interrupt_mode Found MSI capability assign_interrupt_mode Found MSI capability assign_interrupt_mode Found MSI capability assign_interrupt_mode Found MSI capability assign_interrupt_mode Found MSI capability input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input1 ACPI: Sleep Button (CM) [SLPB] ACPI: Getting cpuindex for acpiid 0x3 ACPI: Getting cpuindex for acpiid 0x4 Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled ?serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 19 (level, low) -> IRQ 19 0000:06:03.0: ttyS1 at I/O 0x1000 (irq = 19) is a 16550A 0000:06:03.0: ttyS2 at I/O 0x1008 (irq = 19) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 4 RAM disks of 16384K size 1024 blocksize Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPI Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 e1000: 0000:01:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:76:ce:4a:2c e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ata1: SATA max UDMA/133 cmd 0xFFFFC20000016100 ctl 0x0 bmdma 0x0 irq 314 ata2: SATA max UDMA/133 cmd 0xFFFFC20000016180 ctl 0x0 bmdma 0x0 irq 314 ata3: SATA max UDMA/133 cmd 0xFFFFC20000016200 ctl 0x0 bmdma 0x0 irq 314 ata4: SATA max UDMA/133 cmd 0xFFFFC20000016280 ctl 0x0 bmdma 0x0 irq 314 scsi0 : ahci ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7, max UDMA/133, 586072368 sectors: LBA48 NCQ (depth 31/32) ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/133 scsi1 : ahci ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATA-6, max UDMA/133, 156301488 sectors: LBA48 NCQ (depth 31/32) ata2.00: ata2: dev 0 multi count 16 ata2.00: configured for UDMA/133 scsi2 : ahci ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATA-7, max UDMA/133, 586072368 sectors: LBA48 NCQ (depth 31/32) ata3.00: ata3: dev 0 multi count 16 ata3.00: configured for UDMA/133 scsi3 : ahci ata4: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA ST3300622AS 3.AA PQ: 0 ANSI: 5 SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB) sda: Write Protect is off SCSI device sda: drive cache: write back SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB) sda: Write Protect is off SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 > sd 0:0:0:0: Attached scsi disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Direct-Access ATA ST380817AS 3.42 PQ: 0 ANSI: 5 SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB) sdb: Write Protect is off SCSI device sdb: drive cache: write back SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB) sdb: Write Protect is off SCSI device sdb: drive cache: write back sdb: sdb1 sd 1:0:0:0: Attached scsi disk sdb sd 1:0:0:0: Attached scsi generic sg1 type 0 scsi 2:0:0:0: Direct-Access ATA ST3300622AS 3.AA PQ: 0 ANSI: 5 SCSI device sdc: 586072368 512-byte hdwr sectors (300069 MB) sdc: Write Protect is off SCSI device sdc: drive cache: write back SCSI device sdc: 586072368 512-byte hdwr sectors (300069 MB) sdc: Write Protect is off SCSI device sdc: drive cache: write back sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 sdc11 > sd 2:0:0:0: Attached scsi disk sdc sd 2:0:0:0: Attached scsi generic sg2 type 0 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 ata5: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x30B0 irq 14 ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30B8 irq 15 scsi4 : ata_piix ata5.00: ATAPI, max UDMA/66 ata5.00: configured for UDMA/66 scsi5 : ata_piix ata6: port disabled. ignoring. ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata5.00: (BMDMA stat 0x24) ata5.00: tag 0 cmd 0xa0 Emask 0x4 stat 0x40 err 0x0 (timeout) ata5: soft resetting port ata5.00: configured for UDMA/66 ata5: EH complete ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata5.00: (BMDMA stat 0x24) ata5.00: tag 0 cmd 0xa0 Emask 0x4 stat 0x40 err 0x0 (timeout) ata5: soft resetting port ata5.00: configured for UDMA/66 ata5: EH complete ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata5.00: (BMDMA stat 0x24) ata5.00: tag 0 cmd 0xa0 Emask 0x4 stat 0x40 err 0x0 (timeout) ata5: soft resetting port ata5.00: configured for UDMA/66 ata5: EH complete ata5.00: limiting speed to UDMA/44 ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata5.00: (BMDMA stat 0x24) ata5.00: tag 0 cmd 0xa0 Emask 0x4 stat 0x40 err 0x0 (timeout) ata5: soft resetting port ata5.00: configured for UDMA/44 ata5: EH complete ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: irq 23, io mem 0x482a0400 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 USB Universal Host Controller Interface driver v3.0 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.19-rc5-mm2 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.19-rc5-mm2 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060 ACPI: PCI Interrupt 0000:00:1d.2[C] -> <6>usb usb3: new device found, idVendor=0000, idProduct=0000 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.19-rc5-mm2 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040 ACPI: PCI Interrupt 0000:00:1d.3[D] -> <6>usb usb4: new device found, idVendor=0000, idProduct=0000 usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.19-rc5-mm2 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00003020 usb usb5: new device found, idVendor=0000, idProduct=0000 usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.19-rc5-mm2 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 2-2: new full speed USB device using uhci_hcd and address 2 usbcore: registered new interface driver libusual usbcore: registered new interface driver hiddev usb 2-2: new device found, idVendor=0451, idProduct=2046 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: raid1 personality registered for level 1 EDAC MC: Ver: 2.0.1 Nov 14 2006 usb 2-2: new device strings: Mfr=0, Product=0, SerialNumber=0 TCP bic registered NET: Registered protocol family 1 usb 2-2: configuration #1 chosen from 1 choice hub 2-2:1.0: USB hub found NET: Registered protocol family 17 ------------[ cut here ]------------ kernel BUG at drivers/cpufreq/cpufreq_userspace.c:138! invalid opcode: 0000 [1] SMP last sysfs file: CPU 0 Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.19-rc5-mm2 #1 RIP: 0010:[] [] cpufreq_governor_userspace+0x4e/0x1aa RSP: 0000:ffff81003f61fb40 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff81003ef4a0d8 RCX: 0000000000000003 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff81003ef4a0d8 RBP: ffff81003f61fb60 R08: 0000000000000002 R09: 0000000000000001 R10: 0000000000000002 R11: 0000000000000001 R12: 0000000000000000 R13: 00000000ffffffea R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffffff80652000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000000000 CR3: 0000000000201000 CR4: 00000000000006e0 Process swapper (pid: 1, threadinfo ffff81003f61e000, task ffff810037ff0040) Stack: ffff81003f61fb60 ffff81003ef4a0d8 0000000000000001 ffff81003ef4a0d8 ffff81003f61fb90 ffffffff80433b11 ffffffff805d0e80 ffff81003f61fc20 0000000000000000 ffff81003ef4a0d8 ffff81003f61fbc0 ffffffff80434278 Call Trace: [] __cpufreq_governor+0x51/0x9b [] __cpufreq_set_policy+0xf8/0x13b [] cpufreq_set_policy+0x3c/0x93 [] cpufreq_add_dev+0x315/0x427 [] sysdev_driver_register+0x87/0xdb [] cpufreq_register_driver+0x9e/0x120 [] acpi_cpufreq_init+0xbe/0xc9 [] init+0x160/0x31c [] child_rip+0xa/0x12 Code: 0f 0b eb fe 48 c7 c7 20 13 5d 80 e8 a6 c8 e2 ff 48 8d bb 28 RIP [] cpufreq_governor_userspace+0x4e/0x1aa RSP <0>Kernel panic - not syncing: Attempted to kill init! <0>Rebooting in 60 seconds.. I've put the full config up at http://www.reub.net/files/kernel/configs/2.6.19-rc5-mm1-brokencpufreq Disable cpufreq in the config and the kernel otherwise boots and works fine. Reuben - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/