Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Rob Herring <robh@kernel.org>
To:     Antoniu Miclaus <antoniu.miclaus@analog.com>
Cc:     linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
        devicetree@vger.kernel.org, jic23@kernel.org, robh+dt@kernel.org
In-Reply-To: <20210701141648.131776-1-antoniu.miclaus@analog.com>
References: <20210701141648.131776-1-antoniu.miclaus@analog.com>
Subject: Re: [PATCH v3] dt-bindings: iio: frequency: add adrf6780 doc
Date:   Thu, 01 Jul 2021 14:51:01 -0600
Message-Id: <1625172661.975476.2908606.nullmailer@robh.at.kernel.org>
Precedence: bulk

On Thu, 01 Jul 2021 17:16:48 +0300, Antoniu Miclaus wrote:
> Add device tree bindings for the ADRF6780 Upconverter.
> 
> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
> ---
> v3: remove `adi,parity-en` from example after latest changes in v2
>  .../bindings/iio/frequency/adi,adrf6780.yaml  | 122 ++++++++++++++++++
>  1 file changed, 122 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml:10:1: [warning] wrong indentation: expected 2 but found 0 (indentation)
./Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml:101:1: [warning] wrong indentation: expected 2 but found 0 (indentation)
./Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml:109:1: [warning] wrong indentation: expected 2 but found 0 (indentation)

dtschema/dtc warnings/errors:
\ndoc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1499584

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.