Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932850AbWKPN3c (ORCPT ); Thu, 16 Nov 2006 08:29:32 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932857AbWKPN3b (ORCPT ); Thu, 16 Nov 2006 08:29:31 -0500 Received: from zeus.pimb.org ([80.68.88.21]:37391 "EHLO zeus.pimb.org") by vger.kernel.org with ESMTP id S932850AbWKPN3b (ORCPT ); Thu, 16 Nov 2006 08:29:31 -0500 Date: Thu, 16 Nov 2006 13:52:10 +0000 From: Jody Belka To: lkml , suspend-devel Cc: "Rafael J. Wysocki" , Pavel Machek Subject: problem after s2ram restore with password-protected hdd Message-ID: <20061116135210.GR2808@pimb.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.6+20040523i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 10508 Lines: 211 [Please cc me on any reply, as i'm not subscribed] I tried to use s2ram today on my Dell Inspiron 6000, but i'm having problems after wake-up when I have the hard drives internal password enabled (the normal state for this machine). If i turn the password off, everything works fine. I note that the password screen doesn't appear during wake-up, although the bios help text implies that it should do. Well, works fine as long as I follow the advice at en.opensuse.org/S2ram and don't include vga=795 on the command-line, as I have an ATI Radeon graphics chipset. annoying, although I am in X usually anyway. Any news on that front? J -- Jody Belka uname -a: Linux atlas 2.6.18-rc6-local-evms #1 PREEMPT Tue Sep 12 14:37:12 BST 2006 i686 GNU/Linux s2ram -i: ===================== This machine can be identified by: sys_vendor = "Dell Inc." sys_product = "Inspiron 6000 " sys_version = "" bios_version = "A09" See http://en.opensuse.org/S2ram for details. If you report a problem, please include the complete output above. ===================== netconsole log (trimmed, it went on for 8 megs): [ 203.368000] netconsole: network logging started <<< s2ram >>> [ 217.372000] Stopping tasks: ========================================================| <<< wake-up >>> [ 231.680000] ata2.00: configured for UDMA/33 [ 231.712000] ata1.00: configured for UDMA/100 [ 231.712000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB) [ 231.712000] sda: Write Protect is off [ 231.712000] SCSI device sda: drive cache: write back [ 233.200000] b44: eth0: Link is up at 100 Mbps, full duplex. [ 233.200000] b44: eth0: Flow control is off for TX and off for RX. <<< at this point I triggered some disk activity with a 'ls /' >>> [ 243.412000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 243.412000] ata1.00: (BMDMA stat 0x0) [ 243.412000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error) [ 243.416000] ata1: EH complete [ 243.416000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 243.416000] ata1.00: (BMDMA stat 0x0) [ 243.416000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error) [ 243.416000] ata1: EH complete [ 243.416000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 243.416000] ata1.00: (BMDMA stat 0x0) [ 243.416000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error) [ 243.416000] ata1: EH complete [ 243.420000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 243.420000] ata1.00: (BMDMA stat 0x0) [ 243.420000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error) [ 243.420000] ata1: EH complete [ 243.420000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 243.420000] ata1.00: (BMDMA stat 0x0) [ 243.420000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error) [ 243.420000] ata1: EH complete [ 243.420000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 243.420000] ata1.00: (BMDMA stat 0x0) [ 243.420000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error) [ 243.424000] sd 0:0:0:0: SCSI error: return code = 0x08000002 [ 243.424000] sda: Current: sense key: Aborted Command [ 243.424000] Additional sense: No additional sense information [ 243.424000] end_request: I/O error, dev sda, sector 39892208 [ 243.424000] device-mapper: bbr: dm-bbr: device 254:0: I/O failure on sector 39619103. Scheduling for retry. [ 243.424000] ata1: EH complete [ 243.424000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB) [ 243.424000] sda: Write Protect is off [ 243.428000] SCSI device sda: drive cache: write back [ 243.428000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB) [ 243.428000] sda: Write Protect is off [ 243.428000] SCSI device sda: drive cache: write back [ 243.436000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 243.436000] ata1.00: (BMDMA stat 0x0) [ 243.436000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error) [ 243.436000] ata1: EH complete [ 243.436000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 243.436000] ata1.00: (BMDMA stat 0x0) [ 243.436000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error) [ 243.436000] ata1: EH complete [ 243.436000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 243.436000] ata1.00: (BMDMA stat 0x0) [ 243.436000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error) [ 243.440000] ata1: EH complete [ 243.440000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 243.440000] ata1.00: (BMDMA stat 0x0) [ 243.440000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error) [ 243.440000] ata1: EH complete [ 243.440000] ata1.00: limiting speed to UDMA/66 [ 243.440000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 [ 243.440000] ata1.00: (BMDMA stat 0x0) [ 243.440000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error) [ 243.440000] ata1: soft resetting port [ 243.596000] ata1.00: configured for UDMA/66 [ 243.596000] ata1: EH complete [ 243.596000] ata1.00: limiting speed to UDMA/44 [ 243.596000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 [ 243.596000] ata1.00: (BMDMA stat 0x0) [ 243.596000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error) [ 243.600000] ata1: soft resetting port [ 243.756000] ata1.00: configured for UDMA/44 [ 243.756000] sd 0:0:0:0: SCSI error: return code = 0x08000002 [ 243.756000] sda: Current: sense key: Aborted Command [ 243.756000] Additional sense: No additional sense information [ 243.756000] end_request: I/O error, dev sda, sector 39892208 [ 243.756000] ata1: EH complete [ 243.760000] ata1.00: limiting speed to UDMA/33 [ 243.760000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 [ 243.760000] ata1.00: (BMDMA stat 0x0) [ 243.760000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error) [ 243.760000] ata1: soft resetting port [ 243.916000] ata1.00: configured for UDMA/33 [ 243.916000] ata1: EH complete [ 243.916000] ata1.00: limiting speed to UDMA/25 [ 243.916000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 [ 243.916000] ata1.00: (BMDMA stat 0x0) [ 243.916000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error) [ 243.916000] ata1: soft resetting port [ 244.072000] ata1.00: configured for UDMA/25 [ 244.072000] ata1: EH complete [ 244.072000] ata1.00: limiting speed to UDMA/16 [ 244.072000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 [ 244.072000] ata1.00: (BMDMA stat 0x0) [ 244.072000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error) [ 244.076000] ata1: soft resetting port [ 244.232000] ata1.00: configured for UDMA/16 [ 244.232000] ata1: EH complete [ 244.232000] ata1.00: limiting speed to PIO4 [ 244.232000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 [ 244.232000] ata1.00: (BMDMA stat 0x0) [ 244.232000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error) [ 244.232000] ata1: soft resetting port [ 244.388000] ata1.00: configured for PIO4 [ 244.388000] ata1: EH complete [ 244.392000] ata1.00: limiting speed to PIO3 [ 244.392000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 [ 244.392000] ata1.00: tag 0 cmd 0x20 Emask 0x1 stat 0x51 err 0x4 (device error) [ 244.392000] ata1: soft resetting port [ 244.548000] ata1.00: configured for PIO3 [ 244.548000] ata1: EH complete [ 244.548000] ata1.00: limiting speed to PIO2 [ 244.548000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 [ 244.548000] ata1.00: tag 0 cmd 0x20 Emask 0x1 stat 0x51 err 0x4 (device error) [ 244.548000] ata1: soft resetting port [ 244.708000] ata1.00: configured for PIO2 [ 244.708000] sd 0:0:0:0: SCSI error: return code = 0x08000002 [ 244.708000] sda: Current: sense key: Aborted Command [ 244.708000] Additional sense: No additional sense information [ 244.708000] end_request: I/O error, dev sda, sector 39892208 [ 244.708000] ata1: EH complete [ 244.708000] device-mapper: bbr: dm-bbr: device 254:0: Trying to remap bad sector 39619103 to sector 137 [ 244.708000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB) [ 244.712000] ata1.00: limiting speed to PIO1 [ 244.712000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 [ 244.712000] ata1.00: tag 0 cmd 0x20 Emask 0x1 stat 0x51 err 0x4 (device error) [ 244.712000] ata1: soft resetting port [ 244.868000] ata1.00: configured for PIO1 [ 244.868000] ata1: EH complete [ 244.868000] ata1.00: limiting speed to PIO0 [ 244.868000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 [ 244.868000] ata1.00: tag 0 cmd 0x20 Emask 0x1 stat 0x51 err 0x4 (device error) [ 244.872000] ata1: soft resetting port [ 245.028000] ata1.00: configured for PIO0 [ 245.028000] ata1: EH complete [ 245.032000] ata1.00: speed down requested but no transfer mode left [ 245.032000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 245.032000] ata1.00: tag 0 cmd 0x20 Emask 0x1 stat 0x51 err 0x4 (device error) [ 245.032000] ata1: EH complete [ 245.032000] ata1.00: speed down requested but no transfer mode left [ 245.032000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 245.032000] ata1.00: tag 0 cmd 0x20 Emask 0x1 stat 0x51 err 0x4 (device error) [ 245.032000] ata1: EH complete [ 245.032000] ata1.00: speed down requested but no transfer mode left [ 245.032000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 245.032000] ata1.00: tag 0 cmd 0x20 Emask 0x1 stat 0x51 err 0x4 (device error) [ 245.036000] ata1: EH complete [ 245.036000] ata1.00: speed down requested but no transfer mode left [ 245.036000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 245.036000] ata1.00: tag 0 cmd 0x20 Emask 0x1 stat 0x51 err 0x4 (device error) [ 245.036000] sd 0:0:0:0: SCSI error: return code = 0x08000002 [ 245.036000] sda: Current: sense key: Aborted Command [ 245.036000] Additional sense: No additional sense information [ 245.036000] end_request: I/O error, dev sda, sector 273242 [ 245.036000] ata1: EH complete - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/