Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1424173AbWKPP3u (ORCPT ); Thu, 16 Nov 2006 10:29:50 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1424170AbWKPP3t (ORCPT ); Thu, 16 Nov 2006 10:29:49 -0500 Received: from jutrzenka.firma.o2.pl ([193.222.135.194]:44466 "EHLO jutrzenka.firma.o2.pl") by vger.kernel.org with ESMTP id S1424163AbWKPP3r (ORCPT ); Thu, 16 Nov 2006 10:29:47 -0500 From: "Krzysztof Sierota" Organization: o2.pl Sp z o.o. To: linux-kernel@vger.kernel.org, netdev@vger.kernel.org Subject: 2.6.19-rc6: irq 48: nobody cared Date: Thu, 16 Nov 2006 16:29:44 +0100 User-Agent: KMail/1.9.5 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200611161629.45149.Krzysztof.Sierota@firma.o2.pl> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 25838 Lines: 606 Hi, I'm getting the following in dmesg with 2.6.19-rc5 and 2.6.19-rc6 kernels quad opteron server running 64bit kernel, and the network card gets disabled. On identical server running 32bit kernel, same cards, same slots, same configuration running rc5 I see no errors. irq 48: nobody cared (try booting with the "irqpoll" option) Call Trace: [] __report_bad_irq+0x30/0x7d [] note_interrupt+0x1db/0x21f [] handle_fasteoi_irq+0xa4/0xce [] do_IRQ+0x7b/0xc0 [] default_idle+0x0/0x47 [] ret_from_intr+0x0/0xa [] default_idle+0x29/0x47 [] cpu_idle+0x50/0x6f [] start_kernel+0x1be/0x1c0 [] _sinittext+0x179/0x17d handlers: [] (e1000_intr+0x0/0xeb) Disabling IRQ #48 Some more info: [root@test ~]# cat /proc/modules xt_NOTRACK 3328 12 - Live 0xffffffff88024000 iptable_raw 3392 1 - Live 0xffffffff88022000 ipt_ULOG 10888 1 - Live 0xffffffff8801e000 8021q 22480 0 - Live 0xffffffff88017000 bonding 87288 0 - Live 0xffffffff88000000 [root@test ~]# [root@test ~]# cat /proc/interrupts CPU0 CPU1 CPU2 CPU3 0: 100 50 1 97726 IO-APIC-edge timer 1: 0 0 0 2 IO-APIC-edge i8042 8: 0 0 0 0 IO-APIC-edge rtc 9: 0 0 0 0 IO-APIC-fasteoi acpi 12: 0 0 0 3 IO-APIC-edge i8042 21: 0 0 0 0 IO-APIC-fasteoi libata 22: 1 39 0 8433 IO-APIC-fasteoi libata 41: 579 0 0 0 IO-APIC-fasteoi eth2 42: 1482 0 0 0 IO-APIC-fasteoi eth3 47: 36323 0 0 0 IO-APIC-fasteoi eth4 48: 99905 10 83 2 IO-APIC-fasteoi eth5 508: 0 2 0 6328 PCI-MSI-edge eth1 509: 2 91 1 1248894 PCI-MSI-edge eth0 NMI: 77 27 27 42 LOC: 97828 97811 97794 97777 ERR: 0 [root@test ~]# lspci 00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3) 00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2) 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2) 00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) 00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) 00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2) 00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 00:1a.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:1a.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:1a.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:1a.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 00:1b.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:1b.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:1b.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:1b.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:00.0 Ethernet controller: Intel Corporation 82572EI Gigabit Ethernet Controller (rev 06) 02:00.0 Ethernet controller: Intel Corporation 82572EI Gigabit Ethernet Controller (rev 06) 03:01.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) 04:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8132 PCI-X Bridge (rev 12) 04:01.1 PIC: Advanced Micro Devices [AMD] AMD-8132 PCI-X IOAPIC (rev 12) 04:02.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8132 PCI-X Bridge (rev 12) 04:02.1 PIC: Advanced Micro Devices [AMD] AMD-8132 PCI-X IOAPIC (rev 12) 05:03.0 Ethernet controller: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03) 05:03.1 Ethernet controller: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03) 06:02.0 Ethernet controller: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03) 06:02.1 Ethernet controller: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03) Linux version 2.6.19-rc6 (X) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) #1 SMP Thu Nov 16 16:05:11 CET 2006 Command line: ro root=/dev/md3 clock=tsc BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000dfff0000 (usable) BIOS-e820: 00000000dfff0000 - 00000000dfffe000 (ACPI data) BIOS-e820: 00000000dfffe000 - 00000000e0000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000200000000 (usable) Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 917488) 1 entries of 3200 used Entering add_active_range(0, 1048576, 2097152) 2 entries of 3200 used end_pfn_map = 2097152 DMI 2.3 present. ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000fa190 ACPI: RSDT (v001 A M I OEMRSDT 0x12000505 MSFT 0x00000097) @ 0x00000000dfff0000 ACPI: FADT (v002 A M I OEMFACP 0x12000505 MSFT 0x00000097) @ 0x00000000dfff0200 ACPI: MADT (v001 A M I OEMAPIC 0x12000505 MSFT 0x00000097) @ 0x00000000dfff0390 ACPI: OEMB (v001 A M I AMI_OEM 0x12000505 MSFT 0x00000097) @ 0x00000000dfffe040 ACPI: SRAT (v001 A M I OEMSRAT 0x12000505 MSFT 0x00000097) @ 0x00000000dfff5990 ACPI: MCFG (v001 A M I OEMMCFG 0x12000505 MSFT 0x00000097) @ 0x00000000dfff5b30 ACPI: DSDT (v001 1HQC8 1HQC8003 0x00000003 INTL 0x02002026) @ 0x0000000000000000 SRAT: PXM 0 -> APIC 0 -> Node 0 SRAT: PXM 1 -> APIC 1 -> Node 1 SRAT: PXM 2 -> APIC 2 -> Node 2 SRAT: PXM 3 -> APIC 3 -> Node 3 SRAT: Node 0 PXM 0 100000-80000000 Entering add_active_range(0, 256, 524288) 0 entries of 3200 used SRAT: Node 1 PXM 1 80000000-e0000000 Entering add_active_range(1, 524288, 917488) 1 entries of 3200 used SRAT: Node 2 PXM 2 100000000-180000000 Entering add_active_range(2, 1048576, 1572864) 2 entries of 3200 used SRAT: Node 3 PXM 3 180000000-200000000 Entering add_active_range(3, 1572864, 2097152) 3 entries of 3200 used SRAT: Node 1 PXM 1 80000000-100000000 Entering add_active_range(1, 524288, 917488) 4 entries of 3200 used SRAT: Node 0 PXM 0 0-80000000 Entering add_active_range(0, 0, 159) 4 entries of 3200 used Entering add_active_range(0, 256, 524288) 5 entries of 3200 used NUMA: Using 31 for the hash shift. Bootmem setup node 0 0000000000000000-0000000080000000 Bootmem setup node 1 0000000080000000-0000000100000000 Bootmem setup node 2 0000000100000000-0000000180000000 Bootmem setup node 3 0000000180000000-0000000200000000 Zone PFN ranges: DMA 256 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 2097152 early_node_map[5] active PFN ranges 0: 0 -> 159 0: 256 -> 524288 1: 524288 -> 917488 2: 1048576 -> 1572864 3: 1572864 -> 2097152 On node 0 totalpages: 524032 DMA zone: 60 pages used for memmap DMA zone: 939 pages reserved DMA zone: 2841 pages, LIFO batch:0 DMA32 zone: 8128 pages used for memmap DMA32 zone: 512064 pages, LIFO batch:31 Normal zone: 0 pages used for memmap On node 1 totalpages: 393200 DMA zone: 0 pages used for memmap DMA32 zone: 6143 pages used for memmap DMA32 zone: 387057 pages, LIFO batch:31 Normal zone: 0 pages used for memmap On node 2 totalpages: 524288 DMA zone: 0 pages used for memmap DMA32 zone: 0 pages used for memmap Normal zone: 8192 pages used for memmap Normal zone: 516096 pages, LIFO batch:31 On node 3 totalpages: 524288 DMA zone: 0 pages used for memmap DMA32 zone: 0 pages used for memmap Normal zone: 8192 pages used for memmap Normal zone: 516096 pages, LIFO batch:31 Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) Processor #2 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) Processor #3 ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfeafe000] gsi_base[40]) IOAPIC[1]: apic_id 9, address 0xfeafe000, GSI 40-46 ACPI: IOAPIC (id[0x0a] address[0xfeaff000] gsi_base[47]) IOAPIC[2]: apic_id 10, address 0xfeaff000, GSI 47-53 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Nosave address range: 000000000009f000 - 00000000000a0000 Nosave address range: 00000000000a0000 - 00000000000e8000 Nosave address range: 00000000000e8000 - 0000000000100000 Nosave address range: 00000000dfff0000 - 00000000dfffe000 Nosave address range: 00000000dfffe000 - 00000000e0000000 Nosave address range: 00000000e0000000 - 00000000fec00000 Nosave address range: 00000000fec00000 - 00000000fec01000 Nosave address range: 00000000fec01000 - 00000000fee00000 Nosave address range: 00000000fee00000 - 00000000fee01000 Nosave address range: 00000000fee01000 - 00000000ff700000 Nosave address range: 00000000ff700000 - 0000000100000000 Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000) PERCPU: Allocating 33024 bytes of per cpu data Built 4 zonelists. Total pages: 1934154 Kernel command line: ro root=/dev/md3 clock=tsc Warning! clock= boot option is deprecated. Use clocksource=xyz Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Checking aperture... CPU 0: aperture @ 4000000 size 32 MB Aperture too small (32 MB) No AGP bridge found Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 4000000 Memory: 7650672k/8388608k available (2028k kernel code, 213196k reserved, 875k data, 312k init) Calibrating delay using timer specific routine.. 6002.73 BogoMIPS (lpj=30013667) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0/0 -> Node 0 Freeing SMP alternatives: 24k freed ACPI: Core revision 20060707 Using local APIC timer interrupts. result 12500269 Detected 12.500 MHz APIC timer. Booting processor 1/4 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 6000.21 BogoMIPS (lpj=30001051) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1/1 -> Node 1 AMD Opteron(tm) Processor 856 stepping 01 CPU 1: Syncing TSC to CPU 0. CPU 1: synchronized TSC with CPU 0 (last diff -145 cycles, maxerr 1057 cycles) Booting processor 2/4 APIC 0x2 Initializing CPU#2 Calibrating delay using timer specific routine.. 6000.21 BogoMIPS (lpj=30001067) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 2/2 -> Node 2 AMD Opteron(tm) Processor 856 stepping 01 CPU 2: Syncing TSC to CPU 0. CPU 2: synchronized TSC with CPU 0 (last diff -144 cycles, maxerr 1060 cycles) Booting processor 3/4 APIC 0x3 Initializing CPU#3 Calibrating delay using timer specific routine.. 6000.16 BogoMIPS (lpj=30000840) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 3/3 -> Node 3 AMD Opteron(tm) Processor 856 stepping 01 CPU 3: Syncing TSC to CPU 0. CPU 3: synchronized TSC with CPU 0 (last diff -190 cycles, maxerr 1825 cycles) Brought up 4 CPUs testing NMI watchdog ... OK. Disabling vsyscall due to use of PM timer time.c: Using 3.579545 MHz WALL PM GTOD PM timer. time.c: Detected 3000.063 MHz processor. migration_cost=346 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:09.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Root Bridge [PCIB] (0000:04) PCI: Probing PCI hardware (bus 04) ACPI: PCI Interrupt Routing Table [\_SB_.PCIB.POGA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCIB.POGB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *3 ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *7 ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *10 ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *5 ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *11 ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *9 ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22) *14 SCSI subsystem initialized libata version 2.00 loaded. PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 0 of device 0000:00:01.1 PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 4000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture PCI: Bridge: 0000:00:09.0 IO window: a000-afff MEM window: fc300000-fe3fffff PREFETCH window: e2000000-e20fffff PCI: Bridge: 0000:00:0d.0 IO window: 9000-9fff MEM window: fc200000-fc2fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:0e.0 IO window: 8000-8fff MEM window: fc100000-fc1fffff PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 PCI: Bridge: 0000:04:01.0 IO window: f000-ffff MEM window: fe700000-fe9fffff PREFETCH window: disabled. PCI: Bridge: 0000:04:02.0 IO window: e000-efff MEM window: fe600000-fe6fffff PREFETCH window: disabled. NET: Registered protocol family 2 IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) IPv4 FIB: Using LC-trie version 0.407 TCP established hash table entries: 131072 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Total HugeTLB memory allocated, 0 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Found HT MSI mapping on 0000:00:0d.0 with capability disabled PCI: Found HT MSI mapping on 0000:00:00.0 with capability enabled PCI: Found HT MSI mapping on 0000:00:0e.0 with capability disabled PCI: Found HT MSI mapping on 0000:00:00.0 with capability enabled PCI: Setting latency timer of device 0000:00:0d.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] PCI: Setting latency timer of device 0000:00:0e.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] ACPI: Getting cpuindex for acpiid 0x5 ACPI: Getting cpuindex for acpiid 0x6 ACPI: Getting cpuindex for acpiid 0x7 ACPI: Getting cpuindex for acpiid 0x8 Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Intel(R) PRO/1000 Network Driver - version 7.2.9-k4-NAPI Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 19 ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKD] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:02:00.0 to 64 e1000: 0000:02:00.0: e1000_probe: (PCI Express:2.5Gb/s:32-bit) 00:15:17:0b:82:13 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 18 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKC] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:01:00.0 to 64 e1000: 0000:01:00.0: e1000_probe: (PCI Express:2.5Gb/s:32-bit) 00:15:17:0b:81:ae e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 41 (level, low) -> IRQ 41 e1000: 0000:06:02.0: e1000_probe: (PCI-X:100MHz:64-bit) 00:04:23:b0:6b:6e e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:06:02.1[B] -> GSI 42 (level, low) -> IRQ 42 e1000: 0000:06:02.1: e1000_probe: (PCI-X:100MHz:64-bit) 00:04:23:b0:6b:6f e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 47 (level, low) -> IRQ 47 e1000: 0000:05:03.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:48:57:3e:a0 e1000: eth4: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:05:03.1[B] -> GSI 48 (level, low) -> IRQ 48 e1000: 0000:05:03.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:48:57:3e:a1 e1000: eth5: e1000_probe: Intel(R) PRO/1000 Network Connection sata_nv 0000:00:07.0: version 2.0 ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LTID] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:07.0 to 64 ata1: SATA max UDMA/133 cmd 0xDC00 ctl 0xD802 bmdma 0xCC00 irq 22 ata2: SATA max UDMA/133 cmd 0xD400 ctl 0xD002 bmdma 0xCC08 irq 22 scsi0 : sata_nv ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/133 scsi1 : sata_nv ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32) ata2.00: ata2: dev 0 multi count 16 ata2.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST3250620NS 3.AE PQ: 0 ANSI: 5 SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > sd 0:0:0:0: Attached scsi disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Direct-Access ATA ST3250620NS 3.AE PQ: 0 ANSI: 5 SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 sdb9 > sd 1:0:0:0: Attached scsi disk sdb sd 1:0:0:0: Attached scsi generic sg1 type 0 ACPI: PCI Interrupt Link [LTIE] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LTIE] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:08.0 to 64 ata3: SATA max UDMA/133 cmd 0xC800 ctl 0xC402 bmdma 0xB800 irq 21 ata4: SATA max UDMA/133 cmd 0xC000 ctl 0xBC02 bmdma 0xB808 irq 21 scsi2 : sata_nv ata3: SATA link down (SStatus 0 SControl 300) scsi3 : sata_nv ata4: SATA link down (SStatus 0 SControl 300) serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: raid1 personality registered for level 1 ip_conntrack version 2.4 (262144 buckets, 2097152 max) - 248 bytes per conntrack ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 md: Autodetecting RAID arrays. md: autorun ... md: considering sdb9 ... md: adding sdb9 ... md: sdb8 has different UUID to sdb9 md: sdb7 has different UUID to sdb9 md: sdb6 has different UUID to sdb9 md: sdb5 has different UUID to sdb9 md: sdb1 has different UUID to sdb9 md: adding sda9 ... md: sda8 has different UUID to sdb9 md: sda7 has different UUID to sdb9 md: sda6 has different UUID to sdb9 md: sda5 has different UUID to sdb9 md: sda1 has different UUID to sdb9 md: created md5 md: bind md: bind md: running: raid1: raid set md5 active with 2 out of 2 mirrors md: considering sdb8 ... md: adding sdb8 ... md: sdb7 has different UUID to sdb8 md: sdb6 has different UUID to sdb8 md: sdb5 has different UUID to sdb8 md: sdb1 has different UUID to sdb8 md: adding sda8 ... md: sda7 has different UUID to sdb8 md: sda6 has different UUID to sdb8 md: sda5 has different UUID to sdb8 md: sda1 has different UUID to sdb8 md: created md4 md: bind md: bind md: running: raid1: raid set md4 active with 2 out of 2 mirrors md: considering sdb7 ... md: adding sdb7 ... md: sdb6 has different UUID to sdb7 md: sdb5 has different UUID to sdb7 md: sdb1 has different UUID to sdb7 md: adding sda7 ... md: sda6 has different UUID to sdb7 md: sda5 has different UUID to sdb7 md: sda1 has different UUID to sdb7 md: created md3 md: bind md: bind md: running: raid1: raid set md3 active with 2 out of 2 mirrors md: considering sdb6 ... md: adding sdb6 ... md: sdb5 has different UUID to sdb6 md: sdb1 has different UUID to sdb6 md: adding sda6 ... md: sda5 has different UUID to sdb6 md: sda1 has different UUID to sdb6 md: created md2 md: bind md: bind md: running: raid1: raid set md2 active with 2 out of 2 mirrors md: considering sdb5 ... md: adding sdb5 ... md: sdb1 has different UUID to sdb5 md: adding sda5 ... md: sda1 has different UUID to sdb5 md: created md1 md: bind md: bind md: running: raid1: raid set md1 active with 2 out of 2 mirrors md: considering sdb1 ... md: adding sdb1 ... md: adding sda1 ... md: created md0 md: bind md: bind md: running: raid1: raid set md0 active with 2 out of 2 mirrors md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 312k freed Ethernet Channel Bonding Driver: v3.1.1 (September 26, 2006) bonding: MII link monitoring set to 100 ms md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. EXT3 FS on md3, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on md0, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on md4, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on md2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on md5, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1959800k swap on /dev/md1. Priority:-1 extents:1 across:1959800k - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/