Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Apurva Nandan <a-nandan@ti.com>
To:     Miquel Raynal <miquel.raynal@bootlin.com>,
        Richard Weinberger <richard@nod.at>,
        Vignesh Raghavendra <vigneshr@ti.com>,
        Mark Brown <broonie@kernel.org>,
        Patrice Chotard <patrice.chotard@foss.st.com>,
        Boris Brezillon <boris.brezillon@collabora.com>,
        <linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
        <linux-spi@vger.kernel.org>
CC:     Apurva Nandan <a-nandan@ti.com>, Pratyush Yadav <p.yadav@ti.com>
Subject: [PATCH 01/13] spi: spi-mem: Add DTR templates for cmd, address, dummy and data phase
Date:   Tue, 13 Jul 2021 13:05:26 +0000
Message-ID: <20210713130538.646-2-a-nandan@ti.com>
In-Reply-To: <20210713130538.646-1-a-nandan@ti.com>
References: <20210713130538.646-1-a-nandan@ti.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

Setting dtr field of spi_mem_op is useful when creating templates
for DTR ops in spinand.h. Also, 2 bytes cmd phases are required when
operating in Octal DTR SPI mode.

Create new templates for dtr mode cmd, address, dummy and data phase
in spi_mem_op, which set the dtr field to 1 and also allow passing
the nbytes for the cmd phase.

Signed-off-by: Apurva Nandan <a-nandan@ti.com>
---
 include/linux/spi/spi-mem.h | 87 ++++++++++++++++++++++++++-----------
 1 file changed, 61 insertions(+), 26 deletions(-)

diff --git a/include/linux/spi/spi-mem.h b/include/linux/spi/spi-mem.h
index 85e2ff7b840d..73e52a3ecf66 100644
--- a/include/linux/spi/spi-mem.h
+++ b/include/linux/spi/spi-mem.h
@@ -13,46 +13,81 @@
 
 #include <linux/spi/spi.h>
 
-#define SPI_MEM_OP_CMD(__opcode, __buswidth)			\
-	{							\
-		.buswidth = __buswidth,				\
-		.opcode = __opcode,				\
-		.nbytes = 1,					\
+#define SPI_MEM_OP_CMD_ALL_ARGS(__nbytes, __opcode, __buswidth, __dtr)	\
+	{								\
+		.buswidth = __buswidth,					\
+		.opcode = __opcode,					\
+		.nbytes = __nbytes,					\
+		.dtr = __dtr,						\
 	}
 
-#define SPI_MEM_OP_ADDR(__nbytes, __val, __buswidth)		\
-	{							\
-		.nbytes = __nbytes,				\
-		.val = __val,					\
-		.buswidth = __buswidth,				\
+#define SPI_MEM_OP_CMD(__opcode, __buswidth)				\
+	SPI_MEM_OP_CMD_ALL_ARGS(1, __opcode, __buswidth, 0)
+
+#define SPI_MEM_OP_CMD_DTR(__nbytes, __opcode, __buswidth)		\
+	SPI_MEM_OP_CMD_ALL_ARGS(__nbytes, __opcode, __buswidth, 1)
+
+#define SPI_MEM_OP_ADDR_ALL_ARGS(__nbytes, __val, __buswidth, __dtr)	\
+	{								\
+		.nbytes = __nbytes,					\
+		.val = __val,						\
+		.buswidth = __buswidth,					\
+		.dtr = __dtr,						\
 	}
 
+#define SPI_MEM_OP_ADDR(__nbytes, __val, __buswidth)			\
+	SPI_MEM_OP_ADDR_ALL_ARGS(__nbytes, __val, __buswidth, 0)
+
+#define SPI_MEM_OP_ADDR_DTR(__nbytes, __val, __buswidth)		\
+	SPI_MEM_OP_ADDR_ALL_ARGS(__nbytes, __val, __buswidth, 1)
+
 #define SPI_MEM_OP_NO_ADDR	{ }
 
-#define SPI_MEM_OP_DUMMY(__nbytes, __buswidth)			\
-	{							\
-		.nbytes = __nbytes,				\
-		.buswidth = __buswidth,				\
+#define SPI_MEM_OP_DUMMY_ALL_ARGS(__nbytes, __buswidth, __dtr)		\
+	{								\
+		.nbytes = __nbytes,					\
+		.buswidth = __buswidth,					\
+		.dtr = __dtr,						\
 	}
 
+#define SPI_MEM_OP_DUMMY(__nbytes, __buswidth)				\
+	SPI_MEM_OP_DUMMY_ALL_ARGS(__nbytes, __buswidth, 0)
+
+#define SPI_MEM_OP_DUMMY_DTR(__nbytes, __buswidth)			\
+	SPI_MEM_OP_DUMMY_ALL_ARGS(__nbytes, __buswidth, 1)
+
 #define SPI_MEM_OP_NO_DUMMY	{ }
 
-#define SPI_MEM_OP_DATA_IN(__nbytes, __buf, __buswidth)		\
-	{							\
-		.dir = SPI_MEM_DATA_IN,				\
-		.nbytes = __nbytes,				\
-		.buf.in = __buf,				\
-		.buswidth = __buswidth,				\
+#define SPI_MEM_OP_DATA_IN_ALL_ARGS(__nbytes, __buf, __buswidth, __dtr)	\
+	{								\
+		.dir = SPI_MEM_DATA_IN,					\
+		.nbytes = __nbytes,					\
+		.buf.in = __buf,					\
+		.buswidth = __buswidth,					\
+		.dtr = __dtr,						\
 	}
 
-#define SPI_MEM_OP_DATA_OUT(__nbytes, __buf, __buswidth)	\
-	{							\
-		.dir = SPI_MEM_DATA_OUT,			\
-		.nbytes = __nbytes,				\
-		.buf.out = __buf,				\
-		.buswidth = __buswidth,				\
+#define SPI_MEM_OP_DATA_IN(__nbytes, __buf, __buswidth)			\
+	SPI_MEM_OP_DATA_IN_ALL_ARGS(__nbytes, __buf, __buswidth, 0)
+
+#define SPI_MEM_OP_DATA_IN_DTR(__nbytes, __buf, __buswidth)		\
+	SPI_MEM_OP_DATA_IN_ALL_ARGS(__nbytes, __buf, __buswidth, 1)
+
+#define SPI_MEM_OP_DATA_OUT_ALL_ARGS(__nbytes, __buf, __buswidth, __dtr)\
+	{								\
+		.dir = SPI_MEM_DATA_OUT,				\
+		.nbytes = __nbytes,					\
+		.buf.out = __buf,					\
+		.buswidth = __buswidth,					\
+		.dtr = __dtr,						\
 	}
 
+#define SPI_MEM_OP_DATA_OUT(__nbytes, __buf, __buswidth)		\
+	SPI_MEM_OP_DATA_OUT_ALL_ARGS(__nbytes, __buf, __buswidth, 0)
+
+#define SPI_MEM_OP_DATA_OUT_DTR(__nbytes, __buf, __buswidth)		\
+	SPI_MEM_OP_DATA_OUT_ALL_ARGS(__nbytes, __buf, __buswidth, 1)
+
 #define SPI_MEM_OP_NO_DATA	{ }
 
 /**
-- 
2.17.1