Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755877AbWKQU0j (ORCPT ); Fri, 17 Nov 2006 15:26:39 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1755874AbWKQU0g (ORCPT ); Fri, 17 Nov 2006 15:26:36 -0500 Received: from stargate.chelsio.com ([12.22.49.110]:1855 "EHLO stargate.chelsio.com") by vger.kernel.org with ESMTP id S1755877AbWKQU01 (ORCPT ); Fri, 17 Nov 2006 15:26:27 -0500 Date: Fri, 17 Nov 2006 12:25:06 -0800 From: divy@chelsio.com Message-Id: <200611172025.kAHKP63O025913@colfax2.asicdesigners.com> To: jeff@garzik.org Subject: [PATCH 4/10] cxgb3 - HW access routines - part 2 Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 44660 Lines: 1426 From: Divy Le Ray This patch implements the HW access routines for the Chelsio T3 network adapter's driver. This patch is split. This is the second part. Signed-off-by: Divy Le Ray --- + return t3_wait_op_done(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY, + 0, 5, 1); +} + +/** + * t3_sge_disable_fl - disable an SGE free-buffer list + * @adapter: the adapter + * @id: the free list context id + * + * Disable an SGE free-buffer list. The caller is responsible for + * ensuring only one context operation occurs at a time. + */ +int t3_sge_disable_fl(adapter_t *adapter, unsigned int id) +{ + if (t3_read_reg(adapter, A_SG_CONTEXT_CMD) & F_CONTEXT_CMD_BUSY) + return -EBUSY; + + t3_write_reg(adapter, A_SG_CONTEXT_MASK0, 0); + t3_write_reg(adapter, A_SG_CONTEXT_MASK1, 0); + t3_write_reg(adapter, A_SG_CONTEXT_MASK2, V_FL_SIZE(M_FL_SIZE)); + t3_write_reg(adapter, A_SG_CONTEXT_MASK3, 0); + t3_write_reg(adapter, A_SG_CONTEXT_DATA2, 0); + t3_write_reg(adapter, A_SG_CONTEXT_CMD, + V_CONTEXT_CMD_OPCODE(1) | F_FREELIST | V_CONTEXT(id)); + return t3_wait_op_done(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY, + 0, 5, 1); +} + +/** + * t3_sge_disable_rspcntxt - disable an SGE response queue + * @adapter: the adapter + * @id: the response queue context id + * + * Disable an SGE response queue. The caller is responsible for + * ensuring only one context operation occurs at a time. + */ +int t3_sge_disable_rspcntxt(adapter_t *adapter, unsigned int id) +{ + if (t3_read_reg(adapter, A_SG_CONTEXT_CMD) & F_CONTEXT_CMD_BUSY) + return -EBUSY; + + t3_write_reg(adapter, A_SG_CONTEXT_MASK0, V_CQ_SIZE(M_CQ_SIZE)); + t3_write_reg(adapter, A_SG_CONTEXT_MASK1, 0); + t3_write_reg(adapter, A_SG_CONTEXT_MASK2, 0); + t3_write_reg(adapter, A_SG_CONTEXT_MASK3, 0); + t3_write_reg(adapter, A_SG_CONTEXT_DATA0, 0); + t3_write_reg(adapter, A_SG_CONTEXT_CMD, + V_CONTEXT_CMD_OPCODE(1) | F_RESPONSEQ | V_CONTEXT(id)); + return t3_wait_op_done(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY, + 0, 5, 1); +} + +/** + * t3_sge_disable_cqcntxt - disable an SGE completion queue + * @adapter: the adapter + * @id: the completion queue context id + * + * Disable an SGE completion queue. The caller is responsible for + * ensuring only one context operation occurs at a time. + */ +int t3_sge_disable_cqcntxt(adapter_t *adapter, unsigned int id) +{ + if (t3_read_reg(adapter, A_SG_CONTEXT_CMD) & F_CONTEXT_CMD_BUSY) + return -EBUSY; + + t3_write_reg(adapter, A_SG_CONTEXT_MASK0, V_CQ_SIZE(M_CQ_SIZE)); + t3_write_reg(adapter, A_SG_CONTEXT_MASK1, 0); + t3_write_reg(adapter, A_SG_CONTEXT_MASK2, 0); + t3_write_reg(adapter, A_SG_CONTEXT_MASK3, 0); + t3_write_reg(adapter, A_SG_CONTEXT_DATA0, 0); + t3_write_reg(adapter, A_SG_CONTEXT_CMD, + V_CONTEXT_CMD_OPCODE(1) | F_CQ | V_CONTEXT(id)); + return t3_wait_op_done(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY, + 0, 5, 1); +} + +/** + * t3_sge_cqcntxt_op - perform an operation on a completion queue context + * @adapter: the adapter + * @id: the context id + * @op: the operation to perform + * + * Perform the selected operation on an SGE completion queue context. + * The caller is responsible for ensuring only one context operation + * occurs at a time. + */ +int t3_sge_cqcntxt_op(adapter_t *adapter, unsigned int id, unsigned int op, + unsigned int credits) +{ + if (t3_read_reg(adapter, A_SG_CONTEXT_CMD) & F_CONTEXT_CMD_BUSY) + return -EBUSY; + + t3_write_reg(adapter, A_SG_CONTEXT_DATA0, credits << 16); + t3_write_reg(adapter, A_SG_CONTEXT_CMD, V_CONTEXT_CMD_OPCODE(op) | + V_CONTEXT(id) | F_CQ); + if (t3_wait_op_done(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY, 0, + 5, 1)) + return -EIO; + + if (op >= 2 && op < 7) { + t3_write_reg(adapter, A_SG_CONTEXT_CMD, + V_CONTEXT_CMD_OPCODE(0) | F_CQ | V_CONTEXT(id)); + if (t3_wait_op_done(adapter, A_SG_CONTEXT_CMD, + F_CONTEXT_CMD_BUSY, 0, 5, 1)) + return -EIO; + return G_CQ_INDEX(t3_read_reg(adapter, A_SG_CONTEXT_DATA0)); + } + return 0; +} + +/** + * t3_sge_read_context - read an SGE context + * @type: the context type + * @adapter: the adapter + * @id: the context id + * @data: holds the retrieved context + * + * Read an SGE egress context. The caller is responsible for ensuring + * only one context operation occurs at a time. + */ +static int t3_sge_read_context(unsigned int type, adapter_t *adapter, + unsigned int id, u32 data[4]) +{ + if (t3_read_reg(adapter, A_SG_CONTEXT_CMD) & F_CONTEXT_CMD_BUSY) + return -EBUSY; + + t3_write_reg(adapter, A_SG_CONTEXT_CMD, + V_CONTEXT_CMD_OPCODE(0) | type | V_CONTEXT(id)); + if (t3_wait_op_done(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY, 0, + 5, 1)) + return -EIO; + data[0] = t3_read_reg(adapter, A_SG_CONTEXT_DATA0); + data[1] = t3_read_reg(adapter, A_SG_CONTEXT_DATA1); + data[2] = t3_read_reg(adapter, A_SG_CONTEXT_DATA2); + data[3] = t3_read_reg(adapter, A_SG_CONTEXT_DATA3); + return 0; +} + +/** + * t3_sge_read_ecntxt - read an SGE egress context + * @adapter: the adapter + * @id: the context id + * @data: holds the retrieved context + * + * Read an SGE egress context. The caller is responsible for ensuring + * only one context operation occurs at a time. + */ +int t3_sge_read_ecntxt(adapter_t *adapter, unsigned int id, u32 data[4]) +{ + if (id >= 65536) + return -EINVAL; + return t3_sge_read_context(F_EGRESS, adapter, id, data); +} + +/** + * t3_sge_read_cq - read an SGE CQ context + * @adapter: the adapter + * @id: the context id + * @data: holds the retrieved context + * + * Read an SGE CQ context. The caller is responsible for ensuring + * only one context operation occurs at a time. + */ +int t3_sge_read_cq(adapter_t *adapter, unsigned int id, u32 data[4]) +{ + if (id >= 65536) + return -EINVAL; + return t3_sge_read_context(F_CQ, adapter, id, data); +} + +/** + * t3_sge_read_fl - read an SGE free-list context + * @adapter: the adapter + * @id: the context id + * @data: holds the retrieved context + * + * Read an SGE free-list context. The caller is responsible for ensuring + * only one context operation occurs at a time. + */ +int t3_sge_read_fl(adapter_t *adapter, unsigned int id, u32 data[4]) +{ + if (id >= SGE_QSETS * 2) + return -EINVAL; + return t3_sge_read_context(F_FREELIST, adapter, id, data); +} + +/** + * t3_sge_read_rspq - read an SGE response queue context + * @adapter: the adapter + * @id: the context id + * @data: holds the retrieved context + * + * Read an SGE response queue context. The caller is responsible for + * ensuring only one context operation occurs at a time. + */ +int t3_sge_read_rspq(adapter_t *adapter, unsigned int id, u32 data[4]) +{ + if (id >= SGE_QSETS) + return -EINVAL; + return t3_sge_read_context(F_RESPONSEQ, adapter, id, data); +} + +/** + * t3_config_rss - configure Rx packet steering + * @adapter: the adapter + * @rss_config: RSS settings (written to TP_RSS_CONFIG) + * @cpus: values for the CPU lookup table (0xff terminated) + * @rspq: values for the response queue lookup table (0xffff terminated) + * + * Programs the receive packet steering logic. @cpus and @rspq provide + * the values for the CPU and response queue lookup tables. If they + * provide fewer values than the size of the tables the supplied values + * are used repeatedly until the tables are fully populated. + */ +void t3_config_rss(adapter_t *adapter, unsigned int rss_config, const u8 *cpus, + const u16 *rspq) +{ + int i, j, cpu_idx = 0, q_idx = 0; + + if (cpus) + for (i = 0; i < RSS_TABLE_SIZE; ++i) { + u32 val = i << 16; + + for (j = 0; j < 2; ++j) { + val |= (cpus[cpu_idx++] & 0x3f) << (8 * j); + if (cpus[cpu_idx] == 0xff) + cpu_idx = 0; + } + t3_write_reg(adapter, A_TP_RSS_LKP_TABLE, val); + } + + if (rspq) + for (i = 0; i < RSS_TABLE_SIZE; ++i) { + t3_write_reg(adapter, A_TP_RSS_MAP_TABLE, + (i << 16) | rspq[q_idx++]); + if (rspq[q_idx] == 0xffff) + q_idx = 0; + } + + t3_write_reg(adapter, A_TP_RSS_CONFIG, rss_config); +} + +/** + * t3_read_rss - read the contents of the RSS tables + * @adapter: the adapter + * @lkup: holds the contents of the RSS lookup table + * @map: holds the contents of the RSS map table + * + * Reads the contents of the receive packet steering tables. + */ +int t3_read_rss(adapter_t *adapter, u8 *lkup, u16 *map) +{ + int i; + u32 val; + + if (lkup) + for (i = 0; i < RSS_TABLE_SIZE; ++i) { + t3_write_reg(adapter, A_TP_RSS_LKP_TABLE, + 0xffff0000 | i); + val = t3_read_reg(adapter, A_TP_RSS_LKP_TABLE); + if (!(val & 0x80000000)) + return -EAGAIN; + *lkup++ = (u8)val; + *lkup++ = (u8)(val >> 8); + } + + if (map) + for (i = 0; i < RSS_TABLE_SIZE; ++i) { + t3_write_reg(adapter, A_TP_RSS_MAP_TABLE, + 0xffff0000 | i); + val = t3_read_reg(adapter, A_TP_RSS_MAP_TABLE); + if (!(val & 0x80000000)) + return -EAGAIN; + *map++ = (u16)val; + } + return 0; +} + +/** + * t3_tp_set_offload_mode - put TP in NIC/offload mode + * @adap: the adapter + * @enable: 1 to select offload mode, 0 for regular NIC + * + * Switches TP to NIC/offload mode. + */ +void t3_tp_set_offload_mode(adapter_t *adap, int enable) +{ + if (is_offload(adap) || !enable) + t3_set_reg_field(adap, A_TP_IN_CONFIG, F_NICMODE, + V_NICMODE(!enable)); +} + +/** + * pm_num_pages - calculate the number of pages of the payload memory + * @mem_size: the size of the payload memory + * @pg_size: the size of each payload memory page + * + * Calculate the number of pages, each of the given size, that fit in a + * memory of the specified size, respecting the HW requirement that the + * number of pages must be a multiple of 24. + */ +static inline unsigned int pm_num_pages(unsigned int mem_size, + unsigned int pg_size) +{ + unsigned int n = mem_size / pg_size; + + return n - n % 24; +} + +#define mem_region(adap, start, size, reg) \ + t3_write_reg((adap), A_ ## reg, (start)); \ + start += size + +/* + * partition_mem - partition memory and configure TP memory settings + * @adap: the adapter + * @p: the TP parameters + * + * Partitions context and payload memory and configures TP's memory + * registers. + */ +static void partition_mem(adapter_t *adap, const struct tp_params *p) +{ + unsigned int m, pstructs, tids = t3_mc5_size(&adap->mc5); + unsigned int timers = 0, timers_shift = 22; + + if (adap->params.rev > 0) { + if (tids <= 16 * 1024) { + timers = 1; + timers_shift = 16; + } else if (tids <= 64 * 1024) { + timers = 2; + timers_shift = 18; + } else if (tids <= 256 * 1024) { + timers = 3; + timers_shift = 20; + } + } + + t3_write_reg(adap, A_TP_PMM_SIZE, + p->chan_rx_size | (p->chan_tx_size >> 16)); + + t3_write_reg(adap, A_TP_PMM_TX_BASE, 0); + t3_write_reg(adap, A_TP_PMM_TX_PAGE_SIZE, p->tx_pg_size); + t3_write_reg(adap, A_TP_PMM_TX_MAX_PAGE, p->tx_num_pgs); + t3_set_reg_field(adap, A_TP_PARA_REG3, V_TXDATAACKIDX(M_TXDATAACKIDX), + V_TXDATAACKIDX(fls(p->tx_pg_size) - 12)); + + t3_write_reg(adap, A_TP_PMM_RX_BASE, 0); + t3_write_reg(adap, A_TP_PMM_RX_PAGE_SIZE, p->rx_pg_size); + t3_write_reg(adap, A_TP_PMM_RX_MAX_PAGE, p->rx_num_pgs); + + pstructs = p->rx_num_pgs + p->tx_num_pgs; + /* Add a bit of headroom and make multiple of 24 */ + pstructs += 48; + pstructs -= pstructs % 24; + t3_write_reg(adap, A_TP_CMM_MM_MAX_PSTRUCT, pstructs); + + m = tids * TCB_SIZE; + mem_region(adap, m, (64 << 10) * 64, SG_EGR_CNTX_BADDR); + mem_region(adap, m, (64 << 10) * 64, SG_CQ_CONTEXT_BADDR); + t3_write_reg(adap, A_TP_CMM_TIMER_BASE, V_CMTIMERMAXNUM(timers) | m); + m += ((p->ntimer_qs - 1) << timers_shift) + (1 << 22); + mem_region(adap, m, pstructs * 64, TP_CMM_MM_BASE); + mem_region(adap, m, 64 * (pstructs / 24), TP_CMM_MM_PS_FLST_BASE); + mem_region(adap, m, 64 * (p->rx_num_pgs / 24), TP_CMM_MM_RX_FLST_BASE); + mem_region(adap, m, 64 * (p->tx_num_pgs / 24), TP_CMM_MM_TX_FLST_BASE); + + m = (m + 4095) & ~0xfff; + t3_write_reg(adap, A_CIM_SDRAM_BASE_ADDR, m); + t3_write_reg(adap, A_CIM_SDRAM_ADDR_SIZE, p->cm_size - m); + + tids = (p->cm_size - m - (3 << 20)) / 3072 - 32; + m = t3_mc5_size(&adap->mc5) - adap->params.mc5.nservers - + adap->params.mc5.nfilters - adap->params.mc5.nroutes; + if (tids < m) + adap->params.mc5.nservers += m - tids; +} + +static inline void tp_wr_indirect(adapter_t *adap, unsigned int addr, u32 val) +{ + t3_write_reg(adap, A_TP_PIO_ADDR, addr); + t3_write_reg(adap, A_TP_PIO_DATA, val); +} + +static void tp_config(adapter_t *adap, const struct tp_params *p) +{ + unsigned int v; + + t3_write_reg(adap, A_TP_GLOBAL_CONFIG, F_TXPACINGENABLE | F_PATHMTU | + F_IPCHECKSUMOFFLOAD | F_UDPCHECKSUMOFFLOAD | + F_TCPCHECKSUMOFFLOAD | V_IPTTL(64)); + t3_write_reg(adap, A_TP_TCP_OPTIONS, V_MTUDEFAULT(576) | + F_MTUENABLE | V_WINDOWSCALEMODE(1) | + V_TIMESTAMPSMODE(1) | V_SACKMODE(1) | V_SACKRX(1)); + t3_write_reg(adap, A_TP_DACK_CONFIG, V_AUTOSTATE3(1) | + V_AUTOSTATE2(1) | V_AUTOSTATE1(0) | + V_BYTETHRESHOLD(16384) | V_MSSTHRESHOLD(2) | + F_AUTOCAREFUL | F_AUTOENABLE | V_DACK_MODE(1)); + t3_set_reg_field(adap, A_TP_IN_CONFIG, F_IPV6ENABLE | F_NICMODE, + F_IPV6ENABLE | F_NICMODE); + t3_write_reg(adap, A_TP_TX_RESOURCE_LIMIT, 0x18141814); + t3_write_reg(adap, A_TP_PARA_REG4, 0x5050105); + t3_set_reg_field(adap, A_TP_PARA_REG6, + adap->params.rev > 0 ? F_ENABLEESND : F_T3A_ENABLEESND, + 0); + + v = t3_read_reg(adap, A_TP_PC_CONFIG); + t3_write_reg(adap, A_TP_PC_CONFIG, v | F_TXDEFERENABLE | + F_HEARBEATDACK | F_TXCONGESTIONMODE | F_RXCONGESTIONMODE); + + if (adap->params.rev > 0) { + tp_wr_indirect(adap, A_TP_EGRESS_CONFIG, F_REWRITEFORCETOSIZE); + t3_set_reg_field(adap, A_TP_PARA_REG3, F_TXPACEAUTO, + F_TXPACEAUTO); + t3_set_reg_field(adap, A_TP_PC_CONFIG, F_LOCKTID, F_LOCKTID); + t3_set_reg_field(adap, A_TP_PARA_REG3, 0, F_TXPACEAUTOSTRICT); + } else + t3_set_reg_field(adap, A_TP_PARA_REG3, 0, F_TXPACEFIXED); + + t3_write_reg(adap, A_TP_TX_MOD_QUEUE_WEIGHT1, 0x12121212); + t3_write_reg(adap, A_TP_TX_MOD_QUEUE_WEIGHT0, 0x12121212); + t3_write_reg(adap, A_TP_MOD_CHANNEL_WEIGHT, 0x1212); +} + +/* Desired TP timer resolution in usec */ +#define TP_TMR_RES 50 + +/* TCP timer values in ms */ +#define TP_DACK_TIMER 50 +#define TP_RTO_MIN 250 + +/** + * tp_set_timers - set TP timing parameters + * @adap: the adapter to set + * @core_clk: the core clock frequency in Hz + * + * Set TP's timing parameters, such as the various timer resolutions and + * the TCP timer values. + */ +static void tp_set_timers(adapter_t *adap, unsigned int core_clk) +{ + unsigned int tre = fls(core_clk / (1000000 / TP_TMR_RES)) - 1; + unsigned int dack_re = fls(core_clk / 5000) - 1; /* 200us */ + unsigned int tstamp_re = fls(core_clk / 1000); /* 1ms, at least */ + unsigned int tps = core_clk >> tre; + + t3_write_reg(adap, A_TP_TIMER_RESOLUTION, V_TIMERRESOLUTION(tre) | + V_DELAYEDACKRESOLUTION(dack_re) | + V_TIMESTAMPRESOLUTION(tstamp_re)); + t3_write_reg(adap, A_TP_DACK_TIMER, + (core_clk >> dack_re) / (1000 / TP_DACK_TIMER)); + t3_write_reg(adap, A_TP_TCP_BACKOFF_REG0, 0x3020100); + t3_write_reg(adap, A_TP_TCP_BACKOFF_REG1, 0x7060504); + t3_write_reg(adap, A_TP_TCP_BACKOFF_REG2, 0xb0a0908); + t3_write_reg(adap, A_TP_TCP_BACKOFF_REG3, 0xf0e0d0c); + t3_write_reg(adap, A_TP_SHIFT_CNT, V_SYNSHIFTMAX(6) | + V_RXTSHIFTMAXR1(4) | V_RXTSHIFTMAXR2(15) | + V_PERSHIFTBACKOFFMAX(8) | V_PERSHIFTMAX(8) | + V_KEEPALIVEMAX(9)); + +#define SECONDS * tps + + t3_write_reg(adap, A_TP_MSL, + adap->params.rev > 0 ? 0 : 2 SECONDS); + t3_write_reg(adap, A_TP_RXT_MIN, tps / (1000 / TP_RTO_MIN)); + t3_write_reg(adap, A_TP_RXT_MAX, 64 SECONDS); + t3_write_reg(adap, A_TP_PERS_MIN, 5 SECONDS); + t3_write_reg(adap, A_TP_PERS_MAX, 64 SECONDS); + t3_write_reg(adap, A_TP_KEEP_IDLE, 7200 SECONDS); + t3_write_reg(adap, A_TP_KEEP_INTVL, 75 SECONDS); + t3_write_reg(adap, A_TP_INIT_SRTT, 3 SECONDS); + t3_write_reg(adap, A_TP_FINWAIT2_TIMER, 600 SECONDS); + +#undef SECONDS +} + +/** + * t3_tp_set_coalescing_size - set receive coalescing size + * @adap: the adapter + * @size: the receive coalescing size + * @psh: whether a set PSH bit should deliver coalesced data + * + * Set the receive coalescing size and PSH bit handling. + */ +int t3_tp_set_coalescing_size(adapter_t *adap, unsigned int size, int psh) +{ + u32 val; + + if (size > MAX_RX_COALESCING_LEN) + return -EINVAL; + + val = t3_read_reg(adap, A_TP_PARA_REG3); + val &= ~(F_RXCOALESCEENABLE | F_RXCOALESCEPSHEN); + + if (size) { + val |= F_RXCOALESCEENABLE; + if (psh) + val |= F_RXCOALESCEPSHEN; + t3_write_reg(adap, A_TP_PARA_REG2, V_RXCOALESCESIZE(size) | + V_MAXRXDATA(MAX_RX_COALESCING_LEN)); + } + t3_write_reg(adap, A_TP_PARA_REG3, val); + return 0; +} + +/** + * t3_tp_set_max_rxsize - set the max receive size + * @adap: the adapter + * @size: the max receive size + * + * Set TP's max receive size. This is the limit that applies when + * receive coalescing is disabled. + */ +void t3_tp_set_max_rxsize(adapter_t *adap, unsigned int size) +{ + t3_write_reg(adap, A_TP_PARA_REG7, + V_PMMAXXFERLEN0(size) | V_PMMAXXFERLEN1(size)); +} + +static void __devinit init_mtus(unsigned short mtus[]) +{ + /* + * See draft-mathis-plpmtud-00.txt for the values. The min is 88 so + * it can accomodate max size TCP/IP headers when SACK and timestamps + * are enabled and still have at least 8 bytes of payload. + */ + mtus[0] = 88; + mtus[1] = 256; + mtus[2] = 512; + mtus[3] = 576; + mtus[4] = 808; + mtus[5] = 1024; + mtus[6] = 1280; + mtus[7] = 1492; + mtus[8] = 1500; + mtus[9] = 2002; + mtus[10] = 2048; + mtus[11] = 4096; + mtus[12] = 4352; + mtus[13] = 8192; + mtus[14] = 9000; + mtus[15] = 9600; +} + +/* + * Initial congestion control parameters. + */ +static void __devinit init_cong_ctrl(unsigned short *a, unsigned short *b) +{ + a[0] = a[1] = a[2] = a[3] = a[4] = a[5] = a[6] = a[7] = a[8] = 1; + a[9] = 2; + a[10] = 3; + a[11] = 4; + a[12] = 5; + a[13] = 6; + a[14] = 7; + a[15] = 8; + a[16] = 9; + a[17] = 10; + a[18] = 14; + a[19] = 17; + a[20] = 21; + a[21] = 25; + a[22] = 30; + a[23] = 35; + a[24] = 45; + a[25] = 60; + a[26] = 80; + a[27] = 100; + a[28] = 200; + a[29] = 300; + a[30] = 400; + a[31] = 500; + + b[0] = b[1] = b[2] = b[3] = b[4] = b[5] = b[6] = b[7] = b[8] = 0; + b[9] = b[10] = 1; + b[11] = b[12] = 2; + b[13] = b[14] = b[15] = b[16] = 3; + b[17] = b[18] = b[19] = b[20] = b[21] = 4; + b[22] = b[23] = b[24] = b[25] = b[26] = b[27] = 5; + b[28] = b[29] = 6; + b[30] = b[31] = 7; +} + +/* The minimum additive increment value for the congestion control table */ +#define CC_MIN_INCR 2U + +/** + * t3_load_mtus - write the MTU and congestion control HW tables + * @adap: the adapter + * @mtus: the unrestricted values for the MTU table + * @alphs: the values for the congestion control alpha parameter + * @beta: the values for the congestion control beta parameter + * @mtu_cap: the maximum permitted effective MTU + * + * Write the MTU table with the supplied MTUs capping each at &mtu_cap. + * Update the high-speed congestion control table with the supplied alpha, + * beta, and MTUs. + */ +void t3_load_mtus(adapter_t *adap, unsigned short mtus[NMTUS], + unsigned short alpha[NCCTRL_WIN], + unsigned short beta[NCCTRL_WIN], unsigned short mtu_cap) +{ + static unsigned int avg_pkts[NCCTRL_WIN] = { + 2, 6, 10, 14, 20, 28, 40, 56, 80, 112, 160, 224, 320, 448, 640, + 896, 1281, 1792, 2560, 3584, 5120, 7168, 10240, 14336, 20480, + 28672, 40960, 57344, 81920, 114688, 163840, 229376 }; + + unsigned int i, w; + + for (i = 0; i < NMTUS; ++i) { + unsigned int mtu = min(mtus[i], mtu_cap); + unsigned int log2 = fls(mtu); + + if (!(mtu & ((1 << log2) >> 2))) /* round */ + log2--; + t3_write_reg(adap, A_TP_MTU_TABLE, + (i << 24) | (log2 << 16) | mtu); + + for (w = 0; w < NCCTRL_WIN; ++w) { + unsigned int inc; + + inc = max(((mtu - 40) * alpha[w]) / avg_pkts[w], + CC_MIN_INCR); + + t3_write_reg(adap, A_TP_CCTRL_TABLE, (i << 21) | + (w << 16) | (beta[w] << 13) | inc); + } + } +} + +/** + * t3_read_hw_mtus - returns the values in the HW MTU table + * @adap: the adapter + * @mtus: where to store the HW MTU values + * + * Reads the HW MTU table. + */ +void t3_read_hw_mtus(adapter_t *adap, unsigned short mtus[NMTUS]) +{ + int i; + + for (i = 0; i < NMTUS; ++i) { + unsigned int val; + + t3_write_reg(adap, A_TP_MTU_TABLE, 0xff000000 | i); + val = t3_read_reg(adap, A_TP_MTU_TABLE); + mtus[i] = val & 0x3fff; + } +} + +/** + * t3_get_cong_cntl_tab - reads the congestion control table + * @adap: the adapter + * @incr: where to store the alpha values + * + * Reads the additive increments programmed into the HW congestion + * control table. + */ +void t3_get_cong_cntl_tab(adapter_t *adap, + unsigned short incr[NMTUS][NCCTRL_WIN]) +{ + unsigned int mtu, w; + + for (mtu = 0; mtu < NMTUS; ++mtu) + for (w = 0; w < NCCTRL_WIN; ++w) { + t3_write_reg(adap, A_TP_CCTRL_TABLE, + 0xffff0000 | (mtu << 5) | w); + incr[mtu][w] = (unsigned short)t3_read_reg(adap, + A_TP_CCTRL_TABLE) & 0x1fff; + } +} + +/** + * t3_tp_get_mib_stats - read TP's MIB counters + * @adap: the adapter + * @tps: holds the returned counter values + * + * Returns the values of TP's MIB counters. + */ +void t3_tp_get_mib_stats(adapter_t *adap, struct tp_mib_stats *tps) +{ + t3_read_indirect(adap, A_TP_MIB_INDEX, A_TP_MIB_RDATA, (u32 *)tps, + sizeof(*tps) / sizeof(u32), 0); +} + +#define ulp_region(adap, name, start, len) \ + t3_write_reg((adap), A_ULPRX_ ## name ## _LLIMIT, (start)); \ + t3_write_reg((adap), A_ULPRX_ ## name ## _ULIMIT, \ + (start) + (len) - 1); \ + start += len + +#define ulptx_region(adap, name, start, len) \ + t3_write_reg((adap), A_ULPTX_ ## name ## _LLIMIT, (start)); \ + t3_write_reg((adap), A_ULPTX_ ## name ## _ULIMIT, \ + (start) + (len) - 1) + +static void ulp_config(adapter_t *adap, const struct tp_params *p) +{ + unsigned int m = p->chan_rx_size; + + ulp_region(adap, ISCSI, m, p->chan_rx_size / 8); + ulp_region(adap, TDDP, m, p->chan_rx_size / 8); + ulptx_region(adap, TPT, m, p->chan_rx_size / 4); + ulp_region(adap, STAG, m, p->chan_rx_size / 4); + ulp_region(adap, RQ, m, p->chan_rx_size / 4); + ulptx_region(adap, PBL, m, p->chan_rx_size / 4); + ulp_region(adap, PBL, m, p->chan_rx_size / 4); + t3_write_reg(adap, A_ULPRX_TDDP_TAGMASK, 0xffffffff); +} + +void t3_config_trace_filter(adapter_t *adapter, const struct trace_params *tp, + int filter_index, int invert, int enable) +{ + u32 addr, key[4], mask[4]; + + key[0] = tp->sport | (tp->sip << 16); + key[1] = (tp->sip >> 16) | (tp->dport << 16); + key[2] = tp->dip; + key[3] = tp->proto | (tp->vlan << 8) | (tp->intf << 20); + + mask[0] = tp->sport_mask | (tp->sip_mask << 16); + mask[1] = (tp->sip_mask >> 16) | (tp->dport_mask << 16); + mask[2] = tp->dip_mask; + mask[3] = tp->proto_mask | (tp->vlan_mask << 8) | (tp->intf_mask << 20); + + if (invert) + key[3] |= (1 << 29); + if (enable) + key[3] |= (1 << 28); + + addr = filter_index ? A_TP_RX_TRC_KEY0 : A_TP_TX_TRC_KEY0; + tp_wr_indirect(adapter, addr++, key[0]); + tp_wr_indirect(adapter, addr++, mask[0]); + tp_wr_indirect(adapter, addr++, key[1]); + tp_wr_indirect(adapter, addr++, mask[1]); + tp_wr_indirect(adapter, addr++, key[2]); + tp_wr_indirect(adapter, addr++, mask[2]); + tp_wr_indirect(adapter, addr++, key[3]); + tp_wr_indirect(adapter, addr, mask[3]); + (void) t3_read_reg(adapter, A_TP_PIO_DATA); +} + +/** + * t3_config_sched - configure a HW traffic scheduler + * @adap: the adapter + * @kbps: target rate in Kbps + * @sched: the scheduler index + * + * Configure a HW scheduler for the target rate + */ +int t3_config_sched(adapter_t *adap, unsigned int kbps, int sched) +{ + unsigned int v, tps, cpt, bpt, delta, mindelta = ~0; + unsigned int clk = adap->params.vpd.cclk * 1000; + unsigned int selected_cpt = 0, selected_bpt = 0; + + if (kbps > 0) { + kbps *= 125; /* -> bytes */ + for (cpt = 1; cpt <= 255; cpt++) { + tps = clk / cpt; + bpt = (kbps + tps / 2) / tps; + if (bpt > 0 && bpt <= 255) { + v = bpt * tps; + delta = v >= kbps ? v - kbps : kbps - v; + if (delta <= mindelta) { + mindelta = delta; + selected_cpt = cpt; + selected_bpt = bpt; + } + } else if (selected_cpt) + break; + } + if (!selected_cpt) + return -EINVAL; + } + t3_write_reg(adap, A_TP_TM_PIO_ADDR, + A_TP_TX_MOD_Q1_Q0_RATE_LIMIT - sched / 2); + v = t3_read_reg(adap, A_TP_TM_PIO_DATA); + if (sched & 1) + v = (v & 0xffff) | (selected_cpt << 16) | (selected_bpt << 24); + else + v = (v & 0xffff0000) | selected_cpt | (selected_bpt << 8); + t3_write_reg(adap, A_TP_TM_PIO_DATA, v); + return 0; +} + +static int tp_init(adapter_t *adap, const struct tp_params *p) +{ + int busy = 0; + + tp_config(adap, p); + t3_set_vlan_accel(adap, 3, 0); + + if (is_offload(adap)) { + tp_set_timers(adap, adap->params.vpd.cclk * 1000); + t3_write_reg(adap, A_TP_RESET, F_FLSTINITENABLE); + busy = t3_wait_op_done(adap, A_TP_RESET, F_FLSTINITENABLE, + 0, 1000, 5); + if (busy) + CH_ERR("%s: TP initialization timed out\n", + adapter_name(adap)); + } + + if (!busy) + t3_write_reg(adap, A_TP_RESET, F_TPRESET); + return busy; +} + +int t3_mps_set_active_ports(adapter_t *adap, unsigned int port_mask) +{ + if (port_mask & ~((1 << adap->params.nports) - 1)) + return -EINVAL; + t3_set_reg_field(adap, A_MPS_CFG, F_PORT1ACTIVE | F_PORT0ACTIVE, + port_mask << S_PORT0ACTIVE); + return 0; +} + +/* + * Perform the bits of HW initialization that are dependent on the number + * of available ports. + */ +static void init_hw_for_avail_ports(adapter_t *adap, int nports) +{ + int i; + + if (nports == 1) { + t3_set_reg_field(adap, A_ULPRX_CTL, F_ROUND_ROBIN, 0); + t3_set_reg_field(adap, A_ULPTX_CONFIG, F_CFG_RR_ARB, 0); + t3_write_reg(adap, A_MPS_CFG, F_TPRXPORTEN | F_TPTXPORT0EN | + F_PORT0ACTIVE | F_ENFORCEPKT); + t3_write_reg(adap, A_PM1_TX_CFG, 0xc000c000); + } else { + t3_set_reg_field(adap, A_ULPRX_CTL, 0, F_ROUND_ROBIN); + t3_set_reg_field(adap, A_ULPTX_CONFIG, 0, F_CFG_RR_ARB); + t3_write_reg(adap, A_ULPTX_DMA_WEIGHT, + V_D1_WEIGHT(16) | V_D0_WEIGHT(16)); + t3_write_reg(adap, A_MPS_CFG, F_TPTXPORT0EN | F_TPTXPORT1EN | + F_TPRXPORTEN | F_PORT0ACTIVE | F_PORT1ACTIVE | + F_ENFORCEPKT); + t3_write_reg(adap, A_PM1_TX_CFG, 0x80008000); + t3_set_reg_field(adap, A_TP_PC_CONFIG, 0, F_TXTOSQUEUEMAPMODE); + t3_write_reg(adap, A_TP_TX_MOD_QUEUE_REQ_MAP, + V_TX_MOD_QUEUE_REQ_MAP(0xaa)); + for (i = 0; i < 16; i++) + t3_write_reg(adap, A_TP_TX_MOD_QUE_TABLE, + (i << 16) | 0x1010); + } +} + +static int calibrate_xgm(adapter_t *adapter) +{ + if (uses_xaui(adapter)) { + unsigned int v, i; + + for (i = 0; i < 5; ++i) { + t3_write_reg(adapter, A_XGM_XAUI_IMP, 0); + (void) t3_read_reg(adapter, A_XGM_XAUI_IMP); + msleep(1); + v = t3_read_reg(adapter, A_XGM_XAUI_IMP); + if (!(v & (F_XGM_CALFAULT | F_CALBUSY))) { + t3_write_reg(adapter, A_XGM_XAUI_IMP, + V_XAUIIMP(G_CALIMP(v) >> 2)); + return 0; + } + } + CH_ERR("%s: MAC calibration failed\n", adapter_name(adapter)); + return -1; + } else { + t3_write_reg(adapter, A_XGM_RGMII_IMP, + V_RGMIIIMPPD(2) | V_RGMIIIMPPU(3)); + t3_set_reg_field(adapter, A_XGM_RGMII_IMP, F_XGM_IMPSETUPDATE, + F_XGM_IMPSETUPDATE); + } + return 0; +} + +static void calibrate_xgm_t3b(adapter_t *adapter) +{ + if (!uses_xaui(adapter)) { + t3_write_reg(adapter, A_XGM_RGMII_IMP, F_CALRESET | + F_CALUPDATE | V_RGMIIIMPPD(2) | V_RGMIIIMPPU(3)); + t3_set_reg_field(adapter, A_XGM_RGMII_IMP, F_CALRESET, 0); + t3_set_reg_field(adapter, A_XGM_RGMII_IMP, 0, + F_XGM_IMPSETUPDATE); + t3_set_reg_field(adapter, A_XGM_RGMII_IMP, F_XGM_IMPSETUPDATE, + 0); + t3_set_reg_field(adapter, A_XGM_RGMII_IMP, F_CALUPDATE, 0); + t3_set_reg_field(adapter, A_XGM_RGMII_IMP, 0, F_CALUPDATE); + } +} + +struct mc7_timing_params { + unsigned char ActToPreDly; + unsigned char ActToRdWrDly; + unsigned char PreCyc; + unsigned char RefCyc[5]; + unsigned char BkCyc; + unsigned char WrToRdDly; + unsigned char RdToWrDly; +}; + +/* + * Write a value to a register and check that the write completed. These + * writes normally complete in a cycle or two, so one read should suffice. + * The very first read exists to flush the posted write to the device. + */ +static int wrreg_wait(adapter_t *adapter, unsigned int addr, u32 val) +{ + t3_write_reg(adapter, addr, val); + (void) t3_read_reg(adapter, addr); /* flush */ + if (!(t3_read_reg(adapter, addr) & F_BUSY)) + return 0; + CH_ERR("%s: write to MC7 register 0x%x timed out\n", + adapter_name(adapter), addr); + return -EIO; +} + +static int mc7_init(struct mc7 *mc7, unsigned int mc7_clock, int mem_type) +{ + static unsigned int mc7_mode[] = { 0x632, 0x642, 0x652, 0x432, 0x442 }; + static struct mc7_timing_params mc7_timings[] = { + { 12, 3, 4, { 20, 28, 34, 52, 0 }, 15, 6, 4 }, + { 12, 4, 5, { 20, 28, 34, 52, 0 }, 16, 7, 4 }, + { 12, 5, 6, { 20, 28, 34, 52, 0 }, 17, 8, 4 }, + { 9, 3, 4, { 15, 21, 26, 39, 0 }, 12, 6, 4 }, + { 9, 4, 5, { 15, 21, 26, 39, 0 }, 13, 7, 4 } + }; + + u32 val; + unsigned int width, density, slow, attempts; + adapter_t *adapter = mc7->adapter; + struct mc7_timing_params *p = &mc7_timings[mem_type]; + + val = t3_read_reg(adapter, mc7->offset + A_MC7_CFG); + slow = val & F_SLOW; + width = G_WIDTH(val); + density = G_DEN(val); + + t3_write_reg(adapter, mc7->offset + A_MC7_CFG, val | F_IFEN); + val = t3_read_reg(adapter, mc7->offset + A_MC7_CFG); /* flush */ + msleep(1); + + if (!slow) { + t3_write_reg(adapter, mc7->offset + A_MC7_CAL, F_SGL_CAL_EN); + (void) t3_read_reg(adapter, mc7->offset + A_MC7_CAL); + msleep(1); + if (t3_read_reg(adapter, mc7->offset + A_MC7_CAL) & + (F_BUSY | F_SGL_CAL_EN | F_CAL_FAULT)) { + CH_ERR("%s: %s MC7 calibration timed out\n", + adapter_name(adapter), mc7->name); + goto out_fail; + } + } + + t3_write_reg(adapter, mc7->offset + A_MC7_PARM, + V_ACTTOPREDLY(p->ActToPreDly) | + V_ACTTORDWRDLY(p->ActToRdWrDly) | V_PRECYC(p->PreCyc) | + V_REFCYC(p->RefCyc[density]) | V_BKCYC(p->BkCyc) | + V_WRTORDDLY(p->WrToRdDly) | V_RDTOWRDLY(p->RdToWrDly)); + + t3_write_reg(adapter, mc7->offset + A_MC7_CFG, + val | F_CLKEN | F_TERM150); + (void) t3_read_reg(adapter, mc7->offset + A_MC7_CFG); /* flush */ + + if (!slow) + t3_set_reg_field(adapter, mc7->offset + A_MC7_DLL, F_DLLENB, + F_DLLENB); + udelay(1); + + val = slow ? 3 : 6; + if (wrreg_wait(adapter, mc7->offset + A_MC7_PRE, 0) || + wrreg_wait(adapter, mc7->offset + A_MC7_EXT_MODE2, 0) || + wrreg_wait(adapter, mc7->offset + A_MC7_EXT_MODE3, 0) || + wrreg_wait(adapter, mc7->offset + A_MC7_EXT_MODE1, val)) + goto out_fail; + + if (!slow) { + t3_write_reg(adapter, mc7->offset + A_MC7_MODE, 0x100); + t3_set_reg_field(adapter, mc7->offset + A_MC7_DLL, + F_DLLRST, 0); + udelay(5); + } + + if (wrreg_wait(adapter, mc7->offset + A_MC7_PRE, 0) || + wrreg_wait(adapter, mc7->offset + A_MC7_REF, 0) || + wrreg_wait(adapter, mc7->offset + A_MC7_REF, 0) || + wrreg_wait(adapter, mc7->offset + A_MC7_MODE, + mc7_mode[mem_type]) || + wrreg_wait(adapter, mc7->offset + A_MC7_EXT_MODE1, val | 0x380) || + wrreg_wait(adapter, mc7->offset + A_MC7_EXT_MODE1, val)) + goto out_fail; + + /* clock value is in KHz */ + mc7_clock = mc7_clock * 7812 + mc7_clock / 2; /* ns */ + mc7_clock /= 1000000; /* KHz->MHz, ns->us */ + + t3_write_reg(adapter, mc7->offset + A_MC7_REF, + F_PERREFEN | V_PREREFDIV(mc7_clock)); + (void) t3_read_reg(adapter, mc7->offset + A_MC7_REF); /* flush */ + + t3_write_reg(adapter, mc7->offset + A_MC7_ECC, + F_ECCGENEN | F_ECCCHKEN); + t3_write_reg(adapter, mc7->offset + A_MC7_BIST_DATA, 0); + t3_write_reg(adapter, mc7->offset + A_MC7_BIST_ADDR_BEG, 0); + t3_write_reg(adapter, mc7->offset + A_MC7_BIST_ADDR_END, + (mc7->size << width) - 1); + t3_write_reg(adapter, mc7->offset + A_MC7_BIST_OP, V_OP(1)); + (void) t3_read_reg(adapter, mc7->offset + A_MC7_BIST_OP); /* flush */ + + attempts = 50; + do { + msleep(250); + val = t3_read_reg(adapter, mc7->offset + A_MC7_BIST_OP); + } while ((val & F_BUSY) && --attempts); + if (val & F_BUSY) { + CH_ERR("%s: %s MC7 BIST timed out\n", adapter_name(adapter), + mc7->name); + goto out_fail; + } + + /* Enable normal memory accesses. */ + t3_set_reg_field(adapter, mc7->offset + A_MC7_CFG, 0, F_RDY); + return 0; + + out_fail: + return -1; +} + +static void config_pcie(adapter_t *adap) +{ + static u16 ack_lat[4][6] = { + { 237, 416, 559, 1071, 2095, 4143 }, + { 128, 217, 289, 545, 1057, 2081 }, + { 73, 118, 154, 282, 538, 1050 }, + { 67, 107, 86, 150, 278, 534 } + }; + static u16 rpl_tmr[4][6] = { + { 711, 1248, 1677, 3213, 6285, 12429 }, + { 384, 651, 867, 1635, 3171, 6243 }, + { 219, 354, 462, 846, 1614, 3150 }, + { 201, 321, 258, 450, 834, 1602 } + }; + + u16 val; + unsigned int log2_width, pldsize; + unsigned int fst_trn_rx, fst_trn_tx, acklat, rpllmt; + + t3_os_pci_read_config_2(adap, + adap->params.pci.pcie_cap_addr + PCI_EXP_DEVCTL, + &val); + pldsize = (val & PCI_EXP_DEVCTL_PAYLOAD) >> 5; + + t3_os_pci_read_config_2(adap, + adap->params.pci.pcie_cap_addr + PCI_EXP_LNKSTA, + &val); + + fst_trn_tx = G_NUMFSTTRNSEQ(t3_read_reg(adap, A_PCIE_PEX_CTRL0)); + fst_trn_rx = adap->params.rev == 0 ? fst_trn_tx : + G_NUMFSTTRNSEQRX(t3_read_reg(adap, A_PCIE_MODE)); + log2_width = fls(adap->params.pci.width) - 1; + acklat = ack_lat[log2_width][pldsize]; + if (val & 1) /* check LOsEnable */ + acklat += fst_trn_tx * 4; + rpllmt = rpl_tmr[log2_width][pldsize] + fst_trn_rx * 4; + + if (adap->params.rev == 0) + t3_set_reg_field(adap, A_PCIE_PEX_CTRL1, + V_T3A_ACKLAT(M_T3A_ACKLAT), + V_T3A_ACKLAT(acklat)); + else + t3_set_reg_field(adap, A_PCIE_PEX_CTRL1, V_ACKLAT(M_ACKLAT), + V_ACKLAT(acklat)); + + t3_set_reg_field(adap, A_PCIE_PEX_CTRL0, V_REPLAYLMT(M_REPLAYLMT), + V_REPLAYLMT(rpllmt)); + + t3_write_reg(adap, A_PCIE_PEX_ERR, 0xffffffff); + t3_set_reg_field(adap, A_PCIE_CFG, F_PCIE_CLIDECEN, F_PCIE_CLIDECEN); +} + +/* + * Initialize and configure T3 HW modules. This performs the + * initialization steps that need to be done once after a card is reset. + * MAC and PHY initialization is handled separarely whenever a port is enabled. + * + * fw_params are passed to FW and their value is platform dependent. Only the + * top 8 bits are available for use, the rest must be 0. + */ +int t3_init_hw(adapter_t *adapter, u32 fw_params) +{ + int err = -EIO, attempts = 100; + const struct vpd_params *vpd = &adapter->params.vpd; + + if (adapter->params.rev > 0) + calibrate_xgm_t3b(adapter); + else if (calibrate_xgm(adapter)) + goto out_err; + + if (vpd->mclk) { + partition_mem(adapter, &adapter->params.tp); + + if (mc7_init(&adapter->pmrx, vpd->mclk, vpd->mem_timing) || + mc7_init(&adapter->pmtx, vpd->mclk, vpd->mem_timing) || + mc7_init(&adapter->cm, vpd->mclk, vpd->mem_timing) || + t3_mc5_init(&adapter->mc5, adapter->params.mc5.nservers, + adapter->params.mc5.nfilters, + adapter->params.mc5.nroutes)) + goto out_err; + } + + if (tp_init(adapter, &adapter->params.tp)) + goto out_err; + + t3_tp_set_coalescing_size(adapter, + min(adapter->params.sge.max_pkt_size, + MAX_RX_COALESCING_LEN), 1); + t3_tp_set_max_rxsize(adapter, + min(adapter->params.sge.max_pkt_size, 16384U)); + ulp_config(adapter, &adapter->params.tp); + + if (is_pcie(adapter)) + config_pcie(adapter); + else + t3_set_reg_field(adapter, A_PCIX_CFG, 0, F_CLIDECEN); + + t3_write_reg(adapter, A_PM1_RX_CFG, 0xf000f000); + init_hw_for_avail_ports(adapter, adapter->params.nports); + t3_sge_init(adapter, &adapter->params.sge); + + t3_write_reg(adapter, A_CIM_HOST_ACC_DATA, vpd->uclk | fw_params); + t3_write_reg(adapter, A_CIM_BOOT_CFG, + V_BOOTADDR(FW_FLASH_BOOT_ADDR >> 2)); + (void) t3_read_reg(adapter, A_CIM_BOOT_CFG); /* flush */ + + do { /* wait for uP to initialize */ + msleep(20); + } while (t3_read_reg(adapter, A_CIM_HOST_ACC_DATA) && --attempts); + if (!attempts) + goto out_err; + + err = 0; + out_err: + return err; +} + +/** + * get_pci_mode - determine a card's PCI mode + * @adapter: the adapter + * @p: where to store the PCI settings + * + * Determines a card's PCI mode and associated parameters, such as speed + * and width. + */ +static void __devinit get_pci_mode(adapter_t *adapter, struct pci_params *p) +{ + static unsigned short speed_map[] = { 33, 66, 100, 133 }; + u32 pci_mode, pcie_cap; + + pcie_cap = t3_os_find_pci_capability(adapter, PCI_CAP_ID_EXP); + if (pcie_cap) { + u16 val; + + p->variant = PCI_VARIANT_PCIE; + p->pcie_cap_addr = pcie_cap; + t3_os_pci_read_config_2(adapter, pcie_cap + PCI_EXP_LNKSTA, + &val); + p->width = (val >> 4) & 0x3f; + return; + } + + pci_mode = t3_read_reg(adapter, A_PCIX_MODE); + p->speed = speed_map[G_PCLKRANGE(pci_mode)]; + p->width = (pci_mode & F_64BIT) ? 64 : 32; + pci_mode = G_PCIXINITPAT(pci_mode); + if (pci_mode == 0) + p->variant = PCI_VARIANT_PCI; + else if (pci_mode < 4) + p->variant = PCI_VARIANT_PCIX_MODE1_PARITY; + else if (pci_mode < 8) + p->variant = PCI_VARIANT_PCIX_MODE1_ECC; + else + p->variant = PCI_VARIANT_PCIX_266_MODE2; +} + +/** + * init_link_config - initialize a link's SW state + * @lc: structure holding the link state + * @ai: information about the current card + * + * Initializes the SW state maintained for each link, including the link's + * capabilities and default speed/duplex/flow-control/autonegotiation + * settings. + */ +static void __devinit init_link_config(struct link_config *lc, + unsigned int caps) +{ + lc->supported = caps; + lc->requested_speed = lc->speed = SPEED_INVALID; + lc->requested_duplex = lc->duplex = DUPLEX_INVALID; + lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX; + if (lc->supported & SUPPORTED_Autoneg) { + lc->advertising = lc->supported; + lc->autoneg = AUTONEG_ENABLE; + lc->requested_fc |= PAUSE_AUTONEG; + } else { + lc->advertising = 0; + lc->autoneg = AUTONEG_DISABLE; + } +} + +/** + * mc7_calc_size - calculate MC7 memory size + * @cfg: the MC7 configuration + * + * Calculates the size of an MC7 memory in bytes from the value of its + * configuration register. + */ +static unsigned int __devinit mc7_calc_size(u32 cfg) +{ + unsigned int width = G_WIDTH(cfg); + unsigned int banks = !!(cfg & F_BKS) + 1; + unsigned int org = !!(cfg & F_ORG) + 1; + unsigned int density = G_DEN(cfg); + unsigned int MBs = ((256 << density) * banks) / (org << width); + + return MBs << 20; +} + +static void __devinit mc7_prep(adapter_t *adapter, struct mc7 *mc7, + unsigned int base_addr, const char *name) +{ + u32 cfg; + + mc7->adapter = adapter; + mc7->name = name; + mc7->offset = base_addr - MC7_PMRX_BASE_ADDR; + cfg = t3_read_reg(adapter, mc7->offset + A_MC7_CFG); + mc7->size = mc7_calc_size(cfg); + mc7->width = G_WIDTH(cfg); +} + +void mac_prep(struct cmac *mac, adapter_t *adapter, int index) +{ + mac->adapter = adapter; + mac->offset = (XGMAC0_1_BASE_ADDR - XGMAC0_0_BASE_ADDR) * index; + mac->nucast = 1; + + if (adapter->params.rev == 0 && uses_xaui(adapter)) { + t3_write_reg(adapter, A_XGM_SERDES_CTRL + mac->offset, + is_10G(adapter) ? 0x2901c04 : 0x2301c04); + t3_set_reg_field(adapter, A_XGM_PORT_CFG + mac->offset, + F_ENRGMII, 0); + } +} + +void early_hw_init(adapter_t *adapter, const struct adapter_info *ai) +{ + u32 val = V_PORTSPEED(is_10G(adapter) ? 3 : 2); + + mi1_init(adapter, ai); + t3_write_reg(adapter, A_I2C_CFG, /* set for 80KHz */ + V_I2C_CLKDIV(adapter->params.vpd.cclk / 80 - 1)); + t3_write_reg(adapter, A_T3DBG_GPIO_EN, + ai->gpio_out | F_GPIO0_OEN | F_GPIO0_OUT_VAL); + + if (adapter->params.rev == 0 || !uses_xaui(adapter)) + val |= F_ENRGMII; + + /* Enable MAC clocks so we can access the registers */ + t3_write_reg(adapter, A_XGM_PORT_CFG, val); + (void) t3_read_reg(adapter, A_XGM_PORT_CFG); + + val |= F_CLKDIVRESET_; + t3_write_reg(adapter, A_XGM_PORT_CFG, val); + (void) t3_read_reg(adapter, A_XGM_PORT_CFG); + t3_write_reg(adapter, XGM_REG(A_XGM_PORT_CFG, 1), val); + (void) t3_read_reg(adapter, A_XGM_PORT_CFG); +} + +/* + * Reset the adapter. PCIe cards lose their config space during reset, PCI-X + * ones don't. + */ +int t3_reset_adapter(adapter_t *adapter) +{ + int i; + uint16_t devid = 0; + + if (is_pcie(adapter)) + t3_os_pci_save_state(adapter); + t3_write_reg(adapter, A_PL_RST, F_CRSTWRM | F_CRSTWRMMODE); + + /* + * Delay. Give Some time to device to reset fully. + * XXX The delay time should be modified. + */ + for (i = 0; i < 10; i++) { + msleep(50); + t3_os_pci_read_config_2(adapter, 0x00, &devid); + if (devid == 0x1425) + break; + } + + if (devid != 0x1425) + return -1; + + if (is_pcie(adapter)) + t3_os_pci_restore_state(adapter); + return 0; +} + +/* + * Initialize adapter SW state for the various HW modules, set initial values + * for some adapter tunables, take PHYs out of reset, and initialize the MDIO + * interface. + */ +int __devinit t3_prep_adapter(adapter_t *adapter, + const struct adapter_info *ai, int reset) +{ + int ret; + unsigned int i, j = 0; + + get_pci_mode(adapter, &adapter->params.pci); + + adapter->params.info = ai; + adapter->params.nports = ai->nports; + adapter->params.rev = t3_read_reg(adapter, A_PL_REV); + adapter->params.linkpoll_period = 0; + adapter->params.stats_update_period = is_10G(adapter) ? + MAC_STATS_ACCUM_SECS : (MAC_STATS_ACCUM_SECS * 10); + adapter->params.pci.vpd_cap_addr = + t3_os_find_pci_capability(adapter, PCI_CAP_ID_VPD); + + ret = get_vpd_params(adapter, &adapter->params.vpd); + if (ret < 0) + return ret; + + if (reset && t3_reset_adapter(adapter)) + return -1; + + t3_sge_prep(adapter, &adapter->params.sge); + + if (adapter->params.vpd.mclk) { + struct tp_params *p = &adapter->params.tp; + + mc7_prep(adapter, &adapter->pmrx, MC7_PMRX_BASE_ADDR, "PMRX"); + mc7_prep(adapter, &adapter->pmtx, MC7_PMTX_BASE_ADDR, "PMTX"); + mc7_prep(adapter, &adapter->cm, MC7_CM_BASE_ADDR, "CM"); + + p->nchan = ai->nports; + p->pmrx_size = t3_mc7_size(&adapter->pmrx); + p->pmtx_size = t3_mc7_size(&adapter->pmtx); + p->cm_size = t3_mc7_size(&adapter->cm); + p->chan_rx_size = p->pmrx_size / 2; /* only 1 Rx channel */ + p->chan_tx_size = p->pmtx_size / p->nchan; + p->rx_pg_size = 64 * 1024; + p->tx_pg_size = is_10G(adapter) ? 64 * 1024 : 16 * 1024; + p->rx_num_pgs = pm_num_pages(p->chan_rx_size, p->rx_pg_size); + p->tx_num_pgs = pm_num_pages(p->chan_tx_size, p->tx_pg_size); + p->ntimer_qs = p->cm_size >= (128 << 20) || + adapter->params.rev > 0 ? 12 : 6; + + adapter->params.mc5.nservers = DEFAULT_NSERVERS; + adapter->params.mc5.nfilters = adapter->params.rev > 0 ? + DEFAULT_NFILTERS : 0; + adapter->params.mc5.nroutes = 0; + t3_mc5_prep(adapter, &adapter->mc5, MC5_MODE_144_BIT); + + init_mtus(adapter->params.mtus); + init_cong_ctrl(adapter->params.a_wnd, adapter->params.b_wnd); + } + + early_hw_init(adapter, ai); + + for_each_port(adapter, i) { + u8 hw_addr[6]; + struct port_info *p = &adapter->port[i]; + + while (!adapter->params.vpd.port_type[j]) + ++j; + + p->port_type = &port_types[adapter->params.vpd.port_type[j]]; + p->port_type->phy_prep(&p->phy, adapter, ai->phy_base_addr + j, + ai->mdio_ops); + mac_prep(&p->mac, adapter, j); + ++j; + + /* + * The VPD EEPROM stores the base Ethernet address for the + * card. A port's address is derived from the base by adding + * the port's index to the base's low octet. + */ + memcpy(hw_addr, adapter->params.vpd.eth_base, 5); + hw_addr[5] = adapter->params.vpd.eth_base[5] + i; + + t3_os_set_hw_addr(adapter, i, hw_addr); + init_link_config(&p->link_config, p->port_type->caps); + p->phy.ops->power_down(&p->phy, 1); + if (!(p->port_type->caps & SUPPORTED_IRQ)) + adapter->params.linkpoll_period = 10; + } + + return 0; +} + +void t3_led_ready(adapter_t *adapter) +{ + t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, F_GPIO0_OUT_VAL, + F_GPIO0_OUT_VAL); +} - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/