Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755875AbWKQU2k (ORCPT ); Fri, 17 Nov 2006 15:28:40 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1755873AbWKQU2i (ORCPT ); Fri, 17 Nov 2006 15:28:38 -0500 Received: from stargate.chelsio.com ([12.22.49.110]:12371 "EHLO stargate.chelsio.com") by vger.kernel.org with ESMTP id S1755871AbWKQU0m (ORCPT ); Fri, 17 Nov 2006 15:26:42 -0500 Subject: [PATCH 6/10] cxgb3 - on board memory, MAC and PHY From: "Divy Le Ray " Date: Fri, 17 Nov 2006 12:25:23 -0800 To: jeff@garzik.org Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org Message-Id: <20061117202523.25929.78647.stgit@colfax2.asicdesigners.com> Content-Type: text/plain; charset=utf-8; format=fixed Content-Transfer-Encoding: 8bit User-Agent: StGIT/0.11 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 39309 Lines: 1310 From: Divy Le Ray This patch implements on board memory, MAC and PHY management for the Chelsio T3 network adapter's driver. Signed-off-by: Divy Le Ray --- drivers/net/cxgb3/ael1002.c | 223 +++++++++++++++++++++ drivers/net/cxgb3/mc5.c | 453 +++++++++++++++++++++++++++++++++++++++++++ drivers/net/cxgb3/vsc8211.c | 208 ++++++++++++++++++++ drivers/net/cxgb3/xgmac.c | 383 ++++++++++++++++++++++++++++++++++++ 4 files changed, 1267 insertions(+), 0 deletions(-) diff --git a/drivers/net/cxgb3/ael1002.c b/drivers/net/cxgb3/ael1002.c new file mode 100644 index 0000000..761c719 --- /dev/null +++ b/drivers/net/cxgb3/ael1002.c @@ -0,0 +1,223 @@ +/* + * This file is part of the Chelsio T3 Ethernet driver. + * + * Copyright (C) 2005-2006 Chelsio Communications. All rights reserved. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the LICENSE file included in this + * release for licensing terms and conditions. + */ + +#include "common.h" +#include "regs.h" + +enum { + AEL100X_TX_DISABLE = 9, + AEL100X_TX_CONFIG1 = 0xc002, + AEL1002_PWR_DOWN_HI = 0xc011, + AEL1002_PWR_DOWN_LO = 0xc012, + AEL1002_XFI_EQL = 0xc015, + AEL1002_LB_EN = 0xc017, + + LASI_CTRL = 0x9002, + LASI_STAT = 0x9005 +}; + +static void ael100x_txon(struct cphy *phy) +{ + int tx_on_gpio = phy->addr == 0 ? F_GPIO7_OUT_VAL : F_GPIO2_OUT_VAL; + + msleep(100); + t3_set_reg_field(phy->adapter, A_T3DBG_GPIO_EN, 0, tx_on_gpio); + msleep(30); +} + +static int ael1002_power_down(struct cphy *phy, int enable) +{ + int err; + + err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL100X_TX_DISABLE, !!enable); + if (!err) + err = t3_mdio_change_bits(phy, MDIO_DEV_PMA_PMD, MII_BMCR, + BMCR_PDOWN, enable ? BMCR_PDOWN : 0); + return err; +} + +static int ael1002_reset(struct cphy *phy, int wait) +{ + int err; + + if ((err = ael1002_power_down(phy, 0)) || + (err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL100X_TX_CONFIG1, 1)) || + (err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL1002_PWR_DOWN_HI, 0)) || + (err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL1002_PWR_DOWN_LO, 0)) || + (err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL1002_XFI_EQL, 0x18)) || + (err = t3_mdio_change_bits(phy, MDIO_DEV_PMA_PMD, AEL1002_LB_EN, + 0, 1 << 5))) + return err; + return 0; +} + +static int ael1002_intr_noop(struct cphy *phy) +{ + return 0; +} + +static int ael100x_get_link_status(struct cphy *phy, int *link_ok, + int *speed, int *duplex, int *fc) +{ + if (link_ok) { + unsigned int status; + int err = mdio_read(phy, MDIO_DEV_PMA_PMD, MII_BMSR, &status); + + /* + * BMSR_LSTATUS is latch-low, so if it is 0 we need to read it + * once more to get the current link state. + */ + if (!err && !(status & BMSR_LSTATUS)) + err = mdio_read(phy, MDIO_DEV_PMA_PMD, MII_BMSR, + &status); + if (err) + return err; + *link_ok = !!(status & BMSR_LSTATUS); + } + if (speed) + *speed = SPEED_10000; + if (duplex) + *duplex = DUPLEX_FULL; + return 0; +} + +static struct cphy_ops ael1002_ops = { + .reset = ael1002_reset, + .intr_enable = ael1002_intr_noop, + .intr_disable = ael1002_intr_noop, + .intr_clear = ael1002_intr_noop, + .intr_handler = ael1002_intr_noop, + .get_link_status = ael100x_get_link_status, + .power_down = ael1002_power_down, +}; + +void t3_ael1002_phy_prep(struct cphy *phy, adapter_t *adapter, int phy_addr, + const struct mdio_ops *mdio_ops) +{ + cphy_init(phy, adapter, phy_addr, &ael1002_ops, mdio_ops); + ael100x_txon(phy); +} + +static int ael1006_reset(struct cphy *phy, int wait) +{ + return t3_phy_reset(phy, MDIO_DEV_PMA_PMD, wait); +} + +static int ael1006_intr_enable(struct cphy *phy) +{ + return mdio_write(phy, MDIO_DEV_PMA_PMD, LASI_CTRL, 1); +} + +static int ael1006_intr_disable(struct cphy *phy) +{ + return mdio_write(phy, MDIO_DEV_PMA_PMD, LASI_CTRL, 0); +} + +static int ael1006_intr_clear(struct cphy *phy) +{ + u32 val; + + return mdio_read(phy, MDIO_DEV_PMA_PMD, LASI_STAT, &val); +} + +static int ael1006_intr_handler(struct cphy *phy) +{ + unsigned int status; + int err = mdio_read(phy, MDIO_DEV_PMA_PMD, LASI_STAT, &status); + + if (err) + return err; + return (status & 1) ? cphy_cause_link_change : 0; +} + +static int ael1006_power_down(struct cphy *phy, int enable) +{ + return t3_mdio_change_bits(phy, MDIO_DEV_PMA_PMD, MII_BMCR, + BMCR_PDOWN, enable ? BMCR_PDOWN : 0); +} + +static struct cphy_ops ael1006_ops = { + .reset = ael1006_reset, + .intr_enable = ael1006_intr_enable, + .intr_disable = ael1006_intr_disable, + .intr_clear = ael1006_intr_clear, + .intr_handler = ael1006_intr_handler, + .get_link_status = ael100x_get_link_status, + .power_down = ael1006_power_down, +}; + +void t3_ael1006_phy_prep(struct cphy *phy, adapter_t *adapter, int phy_addr, + const struct mdio_ops *mdio_ops) +{ + cphy_init(phy, adapter, phy_addr, &ael1006_ops, mdio_ops); + ael100x_txon(phy); +} + +static struct cphy_ops qt2045_ops = { + .reset = ael1006_reset, + .intr_enable = ael1006_intr_enable, + .intr_disable = ael1006_intr_disable, + .intr_clear = ael1006_intr_clear, + .intr_handler = ael1006_intr_handler, + .get_link_status = ael100x_get_link_status, + .power_down = ael1006_power_down, +}; + +void t3_qt2045_phy_prep(struct cphy *phy, adapter_t *adapter, int phy_addr, + const struct mdio_ops *mdio_ops) +{ + cphy_init(phy, adapter, /* phy_addr */ 1, &qt2045_ops, mdio_ops); + t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, 0, + F_GPIO10_OEN | F_GPIO10_OUT_VAL); +} + +static int xaui_direct_reset(struct cphy *phy, int wait) +{ + return 0; +} + +static int xaui_direct_get_link_status(struct cphy *phy, int *link_ok, + int *speed, int *duplex, int *fc) +{ + if (link_ok) { + unsigned int status; + + status = t3_read_reg(phy->adapter, + XGM_REG(A_XGM_SERDES_STAT0, phy->addr)); + *link_ok = !(status & F_LOWSIG0); + } + if (speed) + *speed = SPEED_10000; + if (duplex) + *duplex = DUPLEX_FULL; + return 0; +} + +static int xaui_direct_power_down(struct cphy *phy, int enable) +{ + return 0; +} + +static struct cphy_ops xaui_direct_ops = { + .reset = xaui_direct_reset, + .intr_enable = ael1002_intr_noop, + .intr_disable = ael1002_intr_noop, + .intr_clear = ael1002_intr_noop, + .intr_handler = ael1002_intr_noop, + .get_link_status = xaui_direct_get_link_status, + .power_down = xaui_direct_power_down, +}; + +void t3_xaui_direct_phy_prep(struct cphy *phy, adapter_t *adapter, int phy_addr, + const struct mdio_ops *mdio_ops) +{ + cphy_init(phy, adapter, 1, &xaui_direct_ops, mdio_ops); +} diff --git a/drivers/net/cxgb3/mc5.c b/drivers/net/cxgb3/mc5.c new file mode 100644 index 0000000..3010aa1 --- /dev/null +++ b/drivers/net/cxgb3/mc5.c @@ -0,0 +1,453 @@ +/* + * This file is part of the Chelsio T3 Ethernet driver. + * + * Copyright (C) 2003-2006 Chelsio Communications. All rights reserved. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the LICENSE file included in this + * release for licensing terms and conditions. + */ + +#include "common.h" +#include "regs.h" + +enum { + IDT75P52100 = 4, + IDT75N43102 = 5 +}; + +/* DBGI command mode */ +enum { + DBGI_MODE_MBUS = 0, + DBGI_MODE_IDT52100 = 5 +}; + +/* IDT 75P52100 commands */ +#define IDT_CMD_READ 0 +#define IDT_CMD_WRITE 1 +#define IDT_CMD_SEARCH 2 +#define IDT_CMD_LEARN 3 + +/* IDT LAR register address and value for 144-bit mode (low 32 bits) */ +#define IDT_LAR_ADR0 0x180006 +#define IDT_LAR_MODE144 0xffff0000 + +/* IDT SCR and SSR addresses (low 32 bits) */ +#define IDT_SCR_ADR0 0x180000 +#define IDT_SSR0_ADR0 0x180002 +#define IDT_SSR1_ADR0 0x180004 + +/* IDT GMR base address (low 32 bits) */ +#define IDT_GMR_BASE_ADR0 0x180020 + +/* IDT data and mask array base addresses (low 32 bits) */ +#define IDT_DATARY_BASE_ADR0 0 +#define IDT_MSKARY_BASE_ADR0 0x80000 + +/* IDT 75N43102 commands */ +#define IDT4_CMD_SEARCH144 3 +#define IDT4_CMD_WRITE 4 +#define IDT4_CMD_READ 5 + +/* IDT 75N43102 SCR address (low 32 bits) */ +#define IDT4_SCR_ADR0 0x3 + +/* IDT 75N43102 GMR base addresses (low 32 bits) */ +#define IDT4_GMR_BASE0 0x10 +#define IDT4_GMR_BASE1 0x20 +#define IDT4_GMR_BASE2 0x30 + +/* IDT 75N43102 data and mask array base addresses (low 32 bits) */ +#define IDT4_DATARY_BASE_ADR0 0x1000000 +#define IDT4_MSKARY_BASE_ADR0 0x2000000 + +#define MAX_WRITE_ATTEMPTS 5 + +#define MAX_ROUTES 2048 + +/* + * Issue a command to the TCAM and wait for its completion. The address and + * any data required by the command must have been setup by the caller. + */ +static int mc5_cmd_write(adapter_t *adapter, u32 cmd) +{ + t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_CMD, cmd); + return t3_wait_op_done(adapter, A_MC5_DB_DBGI_RSP_STATUS, + F_DBGIRSPVALID, 1, MAX_WRITE_ATTEMPTS, 1); +} + +static inline void dbgi_wr_addr3(adapter_t *adapter, u32 v1, u32 v2, u32 v3) +{ + t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_ADDR0, v1); + t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_ADDR1, v2); + t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_ADDR2, v3); +} + +static inline void dbgi_wr_data3(adapter_t *adapter, u32 v1, u32 v2, u32 v3) +{ + t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_DATA0, v1); + t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_DATA1, v2); + t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_DATA2, v3); +} + +static inline void dbgi_rd_rsp3(adapter_t *adapter, u32 *v1, u32 *v2, u32 *v3) +{ + *v1 = t3_read_reg(adapter, A_MC5_DB_DBGI_RSP_DATA0); + *v2 = t3_read_reg(adapter, A_MC5_DB_DBGI_RSP_DATA1); + *v3 = t3_read_reg(adapter, A_MC5_DB_DBGI_RSP_DATA2); +} + +/* + * Write data to the TCAM register at address (0, 0, addr_lo) using the TCAM + * command cmd. The data to be written must have been set up by the caller. + * Returns -1 on failure, 0 on success. + */ +static int mc5_write(adapter_t *adapter, u32 addr_lo, u32 cmd) +{ + t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_ADDR0, addr_lo); + if (mc5_cmd_write(adapter, cmd) == 0) + return 0; + CH_ERR("%s: MC5 timeout writing to TCAM address 0x%x\n", + adapter_name(adapter), addr_lo); + return -1; +} + +static int init_mask_data_array(struct mc5 *mc5, u32 mask_array_base, + u32 data_array_base, u32 write_cmd, + int addr_shift) +{ + unsigned int i; + adapter_t *adap = mc5->adapter; + + /* + * We need the size of the TCAM data and mask arrays in terms of + * 72-bit entries. + */ + unsigned int size72 = mc5->tcam_size; + unsigned int server_base = t3_read_reg(adap, A_MC5_DB_SERVER_INDEX); + + if (mc5->mode == MC5_MODE_144_BIT) { + size72 *= 2; /* 1 144-bit entry is 2 72-bit entries */ + server_base *= 2; + } + + /* Clear the data array */ + dbgi_wr_data3(adap, 0, 0, 0); + for (i = 0; i < size72; i++) + if (mc5_write(adap, data_array_base + (i << addr_shift), + write_cmd)) + return -1; + + /* Initialize the mask array. */ + dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0xff); + for (i = 0; i < size72; i++) { + if (i == server_base) /* entering server or routing region */ + t3_write_reg(adap, A_MC5_DB_DBGI_REQ_DATA0, + mc5->mode == MC5_MODE_144_BIT ? + 0xfffffff9 : 0xfffffffd); + if (mc5_write(adap, mask_array_base + (i << addr_shift), + write_cmd)) + return -1; + } + return 0; +} + +static int init_idt52100(struct mc5 *mc5) +{ + int i; + adapter_t *adap = mc5->adapter; + + t3_write_reg(adap, A_MC5_DB_RSP_LATENCY, + V_RDLAT(0x15) | V_LRNLAT(0x15) | V_SRCHLAT(0x15)); + t3_write_reg(adap, A_MC5_DB_PART_ID_INDEX, 2); + + /* + * Use GMRs 14-15 for ELOOKUP, GMRs 12-13 for SYN lookups, and + * GMRs 8-9 for ACK- and AOPEN searches. + */ + t3_write_reg(adap, A_MC5_DB_POPEN_DATA_WR_CMD, IDT_CMD_WRITE); + t3_write_reg(adap, A_MC5_DB_POPEN_MASK_WR_CMD, IDT_CMD_WRITE); + t3_write_reg(adap, A_MC5_DB_AOPEN_SRCH_CMD, IDT_CMD_SEARCH); + t3_write_reg(adap, A_MC5_DB_AOPEN_LRN_CMD, IDT_CMD_LEARN); + t3_write_reg(adap, A_MC5_DB_SYN_SRCH_CMD, IDT_CMD_SEARCH | 0x6000); + t3_write_reg(adap, A_MC5_DB_SYN_LRN_CMD, IDT_CMD_LEARN); + t3_write_reg(adap, A_MC5_DB_ACK_SRCH_CMD, IDT_CMD_SEARCH); + t3_write_reg(adap, A_MC5_DB_ACK_LRN_CMD, IDT_CMD_LEARN); + t3_write_reg(adap, A_MC5_DB_ILOOKUP_CMD, IDT_CMD_SEARCH); + t3_write_reg(adap, A_MC5_DB_ELOOKUP_CMD, IDT_CMD_SEARCH | 0x7000); + t3_write_reg(adap, A_MC5_DB_DATA_WRITE_CMD, IDT_CMD_WRITE); + t3_write_reg(adap, A_MC5_DB_DATA_READ_CMD, IDT_CMD_READ); + + /* Set DBGI command mode for IDT TCAM. */ + t3_write_reg(adap, A_MC5_DB_DBGI_CONFIG, DBGI_MODE_IDT52100); + + /* Set up LAR */ + dbgi_wr_data3(adap, IDT_LAR_MODE144, 0, 0); + if (mc5_write(adap, IDT_LAR_ADR0, IDT_CMD_WRITE)) + goto err; + + /* Set up SSRs */ + dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0); + if (mc5_write(adap, IDT_SSR0_ADR0, IDT_CMD_WRITE) || + mc5_write(adap, IDT_SSR1_ADR0, IDT_CMD_WRITE)) + goto err; + + /* Set up GMRs */ + for (i = 0; i < 32; ++i) { + if (i >= 12 && i < 15) + dbgi_wr_data3(adap, 0xfffffff9, 0xffffffff, 0xff); + else if (i == 15) + dbgi_wr_data3(adap, 0xfffffff9, 0xffff8007, 0xff); + else + dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0xff); + + if (mc5_write(adap, IDT_GMR_BASE_ADR0 + i, IDT_CMD_WRITE)) + goto err; + } + + /* Set up SCR */ + dbgi_wr_data3(adap, 1, 0, 0); + if (mc5_write(adap, IDT_SCR_ADR0, IDT_CMD_WRITE)) + goto err; + + return init_mask_data_array(mc5, IDT_MSKARY_BASE_ADR0, + IDT_DATARY_BASE_ADR0, IDT_CMD_WRITE, 0); + err: + return -EIO; +} + +static int init_idt43102(struct mc5 *mc5) +{ + int i; + adapter_t *adap = mc5->adapter; + + t3_write_reg(adap, A_MC5_DB_RSP_LATENCY, + adap->params.rev == 0 ? V_RDLAT(0xd) | V_SRCHLAT(0x11) : + V_RDLAT(0xd) | V_SRCHLAT(0x12)); + + /* + * Use GMRs 24-25 for ELOOKUP, GMRs 20-21 for SYN lookups, and no mask + * for ACK- and AOPEN searches. + */ + t3_write_reg(adap, A_MC5_DB_POPEN_DATA_WR_CMD, IDT4_CMD_WRITE); + t3_write_reg(adap, A_MC5_DB_POPEN_MASK_WR_CMD, IDT4_CMD_WRITE); + t3_write_reg(adap, A_MC5_DB_AOPEN_SRCH_CMD, + IDT4_CMD_SEARCH144 | 0x3800); + t3_write_reg(adap, A_MC5_DB_SYN_SRCH_CMD, IDT4_CMD_SEARCH144); + t3_write_reg(adap, A_MC5_DB_ACK_SRCH_CMD, IDT4_CMD_SEARCH144 | 0x3800); + t3_write_reg(adap, A_MC5_DB_ILOOKUP_CMD, IDT4_CMD_SEARCH144 | 0x3800); + t3_write_reg(adap, A_MC5_DB_ELOOKUP_CMD, IDT4_CMD_SEARCH144 | 0x800); + t3_write_reg(adap, A_MC5_DB_DATA_WRITE_CMD, IDT4_CMD_WRITE); + t3_write_reg(adap, A_MC5_DB_DATA_READ_CMD, IDT4_CMD_READ); + + t3_write_reg(adap, A_MC5_DB_PART_ID_INDEX, 3); + + /* Set DBGI command mode for IDT TCAM. */ + t3_write_reg(adap, A_MC5_DB_DBGI_CONFIG, DBGI_MODE_IDT52100); + + /* Set up GMRs */ + dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0xff); + for (i = 0; i < 7; ++i) + if (mc5_write(adap, IDT4_GMR_BASE0 + i, IDT4_CMD_WRITE)) + goto err; + + for (i = 0; i < 4; ++i) + if (mc5_write(adap, IDT4_GMR_BASE2 + i, IDT4_CMD_WRITE)) + goto err; + + dbgi_wr_data3(adap, 0xfffffff9, 0xffffffff, 0xff); + if (mc5_write(adap, IDT4_GMR_BASE1, IDT4_CMD_WRITE) || + mc5_write(adap, IDT4_GMR_BASE1 + 1, IDT4_CMD_WRITE) || + mc5_write(adap, IDT4_GMR_BASE1 + 4, IDT4_CMD_WRITE)) + goto err; + + dbgi_wr_data3(adap, 0xfffffff9, 0xffff8007, 0xff); + if (mc5_write(adap, IDT4_GMR_BASE1 + 5, IDT4_CMD_WRITE)) + goto err; + + /* Set up SCR */ + dbgi_wr_data3(adap, 0xf0000000, 0, 0); + if (mc5_write(adap, IDT4_SCR_ADR0, IDT4_CMD_WRITE)) + goto err; + + return init_mask_data_array(mc5, IDT4_MSKARY_BASE_ADR0, + IDT4_DATARY_BASE_ADR0, IDT4_CMD_WRITE, 1); + err: + return -EIO; +} + +/* Put MC5 in DBGI mode. */ +static inline void mc5_dbgi_mode_enable(const struct mc5 *mc5) +{ + t3_write_reg(mc5->adapter, A_MC5_DB_CONFIG, + V_TMMODE(mc5->mode == MC5_MODE_72_BIT) | F_DBGIEN); +} + +/* Put MC5 in M-Bus mode. */ +static void mc5_dbgi_mode_disable(const struct mc5 *mc5) +{ + t3_write_reg(mc5->adapter, A_MC5_DB_CONFIG, + V_TMMODE(mc5->mode == MC5_MODE_72_BIT) | + V_COMPEN(mc5->mode == MC5_MODE_72_BIT) | + V_PRTYEN(mc5->parity_enabled) | F_MBUSEN); +} + +/* + * Initialization that requires the OS and protocol layers to already + * be intialized goes here. + */ +int t3_mc5_init(struct mc5 *mc5, unsigned int nservers, unsigned int nfilters, + unsigned int nroutes) +{ + u32 cfg; + int err; + unsigned int tcam_size = mc5->tcam_size; + adapter_t *adap = mc5->adapter; + + if (nroutes > MAX_ROUTES || nroutes + nservers + nfilters > tcam_size) + return -EINVAL; + + /* Reset the TCAM */ + cfg = t3_read_reg(adap, A_MC5_DB_CONFIG) & ~F_TMMODE; + cfg |= V_TMMODE(mc5->mode == MC5_MODE_72_BIT) | F_TMRST; + t3_write_reg(adap, A_MC5_DB_CONFIG, cfg); + if (t3_wait_op_done(adap, A_MC5_DB_CONFIG, F_TMRDY, 1, 500, 0)) { + CH_ERR("%s: TCAM reset timed out\n", adapter_name(adap)); + return -1; + } + + t3_write_reg(adap, A_MC5_DB_ROUTING_TABLE_INDEX, tcam_size - nroutes); + t3_write_reg(adap, A_MC5_DB_FILTER_TABLE, + tcam_size - nroutes - nfilters); + t3_write_reg(adap, A_MC5_DB_SERVER_INDEX, + tcam_size - nroutes - nfilters - nservers); + + mc5->parity_enabled = 1; + + /* All the TCAM addresses we access have only the low 32 bits non 0 */ + t3_write_reg(adap, A_MC5_DB_DBGI_REQ_ADDR1, 0); + t3_write_reg(adap, A_MC5_DB_DBGI_REQ_ADDR2, 0); + + mc5_dbgi_mode_enable(mc5); + + switch (mc5->part_type) { + case IDT75P52100: + err = init_idt52100(mc5); + break; + case IDT75N43102: + err = init_idt43102(mc5); + break; + default: + CH_ERR("%s: Unsupported TCAM type %d\n", adapter_name(adap), + mc5->part_type); + err = -EINVAL; + break; + } + + mc5_dbgi_mode_disable(mc5); + return err; +} + +/* + * read_mc5_range - dump a part of the memory managed by MC5 + * @mc5: the MC5 handle + * @start: the start address for the dump + * @n: number of 72-bit words to read + * @buf: result buffer + * + * Read n 72-bit words from MC5 memory from the given start location. + */ +int t3_read_mc5_range(const struct mc5 *mc5, unsigned int start, + unsigned int n, u32 *buf) +{ + u32 read_cmd; + int err = 0; + adapter_t *adap = mc5->adapter; + + if (mc5->part_type == IDT75P52100) + read_cmd = IDT_CMD_READ; + else if (mc5->part_type == IDT75N43102) + read_cmd = IDT4_CMD_READ; + else + return -EINVAL; + + mc5_dbgi_mode_enable(mc5); + + while (n--) { + t3_write_reg(adap, A_MC5_DB_DBGI_REQ_ADDR0, start++); + if (mc5_cmd_write(adap, read_cmd)) { + err = -EIO; + break; + } + dbgi_rd_rsp3(adap, buf + 2, buf + 1, buf); + buf += 3; + } + + mc5_dbgi_mode_disable(mc5); + return 0; +} + +#define MC5_INT_FATAL (F_PARITYERR | F_REQQPARERR | F_DISPQPARERR) + +/* + * MC5 interrupt handler + */ +void t3_mc5_intr_handler(struct mc5 *mc5) +{ + adapter_t *adap = mc5->adapter; + u32 cause = t3_read_reg(adap, A_MC5_DB_INT_CAUSE); + + if ((cause & F_PARITYERR) && mc5->parity_enabled) { + CH_ALERT("%s: MC5 parity error\n", adapter_name(adap)); + mc5->stats.parity_err++; + } + + if (cause & F_REQQPARERR) { + CH_ALERT("%s: MC5 request queue parity error\n", + adapter_name(adap)); + mc5->stats.reqq_parity_err++; + } + + if (cause & F_DISPQPARERR) { + CH_ALERT("%s: MC5 dispatch queue parity error\n", + adapter_name(adap)); + mc5->stats.dispq_parity_err++; + } + + if (cause & F_ACTRGNFULL) + mc5->stats.active_rgn_full++; + if (cause & F_NFASRCHFAIL) + mc5->stats.nfa_srch_err++; + if (cause & F_UNKNOWNCMD) + mc5->stats.unknown_cmd++; + if (cause & F_DELACTEMPTY) + mc5->stats.del_act_empty++; + if (cause & MC5_INT_FATAL) + t3_fatal_err(adap); + + t3_write_reg(adap, A_MC5_DB_INT_CAUSE, cause); +} + +void __devinit t3_mc5_prep(adapter_t *adapter, struct mc5 *mc5, int mode) +{ +#define K * 1024 + + static unsigned int tcam_part_size[] = { /* in K 72-bit entries */ + 64 K, 128 K, 256 K, 32 K + }; + +#undef K + + u32 cfg = t3_read_reg(adapter, A_MC5_DB_CONFIG); + + mc5->adapter = adapter; + mc5->mode = (unsigned char) mode; + mc5->part_type = (unsigned char) G_TMTYPE(cfg); + if (cfg & F_TMTYPEHI) + mc5->part_type |= 4; + + mc5->tcam_size = tcam_part_size[G_TMPARTSIZE(cfg)]; + if (mode == MC5_MODE_144_BIT) + mc5->tcam_size /= 2; +} diff --git a/drivers/net/cxgb3/vsc8211.c b/drivers/net/cxgb3/vsc8211.c new file mode 100644 index 0000000..491489e --- /dev/null +++ b/drivers/net/cxgb3/vsc8211.c @@ -0,0 +1,208 @@ +/* + * This file is part of the Chelsio T3 Ethernet driver. + * + * Copyright (C) 2005-2006 Chelsio Communications. All rights reserved. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the LICENSE file included in this + * release for licensing terms and conditions. + */ + +#include "common.h" + +/* VSC8211 PHY specific registers. */ +enum { + VSC8211_INTR_ENABLE = 25, + VSC8211_INTR_STATUS = 26, + VSC8211_AUX_CTRL_STAT = 28, +}; + +enum { + VSC_INTR_RX_ERR = 1 << 0, + VSC_INTR_MS_ERR = 1 << 1, /* master/slave resolution error */ + VSC_INTR_CABLE = 1 << 2, /* cable impairment */ + VSC_INTR_FALSE_CARR = 1 << 3, /* false carrier */ + VSC_INTR_MEDIA_CHG = 1 << 4, /* AMS media change */ + VSC_INTR_RX_FIFO = 1 << 5, /* Rx FIFO over/underflow */ + VSC_INTR_TX_FIFO = 1 << 6, /* Tx FIFO over/underflow */ + VSC_INTR_DESCRAMBL = 1 << 7, /* descrambler lock-lost */ + VSC_INTR_SYMBOL_ERR = 1 << 8, /* symbol error */ + VSC_INTR_NEG_DONE = 1 << 10, /* autoneg done */ + VSC_INTR_NEG_ERR = 1 << 11, /* autoneg error */ + VSC_INTR_LINK_CHG = 1 << 13, /* link change */ + VSC_INTR_ENABLE = 1 << 15, /* interrupt enable */ +}; + +#define CFG_CHG_INTR_MASK (VSC_INTR_LINK_CHG | VSC_INTR_NEG_ERR | \ + VSC_INTR_NEG_DONE) +#define INTR_MASK (CFG_CHG_INTR_MASK | VSC_INTR_TX_FIFO | VSC_INTR_RX_FIFO | \ + VSC_INTR_ENABLE) + +/* PHY specific auxiliary control & status register fields */ +#define S_ACSR_ACTIPHY_TMR 0 +#define M_ACSR_ACTIPHY_TMR 0x3 +#define V_ACSR_ACTIPHY_TMR(x) ((x) << S_ACSR_ACTIPHY_TMR) + +#define S_ACSR_SPEED 3 +#define M_ACSR_SPEED 0x3 +#define G_ACSR_SPEED(x) (((x) >> S_ACSR_SPEED) & M_ACSR_SPEED) + +#define S_ACSR_DUPLEX 5 +#define F_ACSR_DUPLEX (1 << S_ACSR_DUPLEX) + +#define S_ACSR_ACTIPHY 6 +#define F_ACSR_ACTIPHY (1 << S_ACSR_ACTIPHY) + +/* + * Reset the PHY. This PHY completes reset immediately so we never wait. + */ +static int vsc8211_reset(struct cphy *cphy, int wait) +{ + return t3_phy_reset(cphy, 0, 0); +} + +static int vsc8211_intr_enable(struct cphy *cphy) +{ + return mdio_write(cphy, 0, VSC8211_INTR_ENABLE, INTR_MASK); +} + +static int vsc8211_intr_disable(struct cphy *cphy) +{ + return mdio_write(cphy, 0, VSC8211_INTR_ENABLE, 0); +} + +static int vsc8211_intr_clear(struct cphy *cphy) +{ + u32 val; + + /* Clear PHY interrupts by reading the register. */ + return mdio_read(cphy, 0, VSC8211_INTR_STATUS, &val); +} + +static int vsc8211_autoneg_enable(struct cphy *cphy) +{ + return t3_mdio_change_bits(cphy, 0, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE, + BMCR_ANENABLE | BMCR_ANRESTART); +} + +static int vsc8211_autoneg_restart(struct cphy *cphy) +{ + return t3_mdio_change_bits(cphy, 0, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE, + BMCR_ANRESTART); +} + +static int vsc8211_get_link_status(struct cphy *cphy, int *link_ok, + int *speed, int *duplex, int *fc) +{ + unsigned int bmcr, status, lpa, adv; + int err, sp = -1, dplx = -1, pause = 0; + + err = mdio_read(cphy, 0, MII_BMCR, &bmcr); + if (!err) + err = mdio_read(cphy, 0, MII_BMSR, &status); + if (err) + return err; + + if (link_ok) { + /* + * BMSR_LSTATUS is latch-low, so if it is 0 we need to read it + * once more to get the current link state. + */ + if (!(status & BMSR_LSTATUS)) + err = mdio_read(cphy, 0, MII_BMSR, &status); + if (err) + return err; + *link_ok = (status & BMSR_LSTATUS) != 0; + } + if (!(bmcr & BMCR_ANENABLE)) { + dplx = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF; + if (bmcr & BMCR_SPEED1000) + sp = SPEED_1000; + else if (bmcr & BMCR_SPEED100) + sp = SPEED_100; + else + sp = SPEED_10; + } else if (status & BMSR_ANEGCOMPLETE) { + err = mdio_read(cphy, 0, VSC8211_AUX_CTRL_STAT, &status); + if (err) + return err; + + dplx = (status & F_ACSR_DUPLEX) ? DUPLEX_FULL : DUPLEX_HALF; + sp = G_ACSR_SPEED(status); + if (sp == 0) + sp = SPEED_10; + else if (sp == 1) + sp = SPEED_100; + else + sp = SPEED_1000; + + if (fc && dplx == DUPLEX_FULL) { + err = mdio_read(cphy, 0, MII_LPA, &lpa); + if (!err) + err = mdio_read(cphy, 0, MII_ADVERTISE, &adv); + if (err) + return err; + + if (lpa & adv & ADVERTISE_PAUSE_CAP) + pause = PAUSE_RX | PAUSE_TX; + else if ((lpa & ADVERTISE_PAUSE_CAP) && + (lpa & ADVERTISE_PAUSE_ASYM) && + (adv & ADVERTISE_PAUSE_ASYM)) + pause = PAUSE_TX; + else if ((lpa & ADVERTISE_PAUSE_ASYM) && + (adv & ADVERTISE_PAUSE_CAP)) + pause = PAUSE_RX; + } + } + if (speed) + *speed = sp; + if (duplex) + *duplex = dplx; + if (fc) + *fc = pause; + return 0; +} + +static int vsc8211_power_down(struct cphy *cphy, int enable) +{ + return t3_mdio_change_bits(cphy, 0, MII_BMCR, BMCR_PDOWN, + enable ? BMCR_PDOWN : 0); +} + +static int vsc8211_intr_handler(struct cphy *cphy) +{ + unsigned int cause; + int err, cphy_cause = 0; + + err = mdio_read(cphy, 0, VSC8211_INTR_STATUS, &cause); + if (err) + return err; + + cause &= INTR_MASK; + if (cause & CFG_CHG_INTR_MASK) + cphy_cause |= cphy_cause_link_change; + if (cause & (VSC_INTR_RX_FIFO | VSC_INTR_TX_FIFO)) + cphy_cause |= cphy_cause_fifo_error; + return cphy_cause; +} + +static struct cphy_ops vsc8211_ops = { + .reset = vsc8211_reset, + .intr_enable = vsc8211_intr_enable, + .intr_disable = vsc8211_intr_disable, + .intr_clear = vsc8211_intr_clear, + .intr_handler = vsc8211_intr_handler, + .autoneg_enable = vsc8211_autoneg_enable, + .autoneg_restart = vsc8211_autoneg_restart, + .advertise = t3_phy_advertise, + .set_speed_duplex = t3_set_phy_speed_duplex, + .get_link_status = vsc8211_get_link_status, + .power_down = vsc8211_power_down, +}; + +void t3_vsc8211_phy_prep(struct cphy *phy, adapter_t *adapter, int phy_addr, + const struct mdio_ops *mdio_ops) +{ + cphy_init(phy, adapter, phy_addr, &vsc8211_ops, mdio_ops); +} diff --git a/drivers/net/cxgb3/xgmac.c b/drivers/net/cxgb3/xgmac.c new file mode 100644 index 0000000..1ddd4d0 --- /dev/null +++ b/drivers/net/cxgb3/xgmac.c @@ -0,0 +1,383 @@ +/* + * This file is part of the Chelsio T3 Ethernet driver. + * + * Copyright (C) 2005-2006 Chelsio Communications. All rights reserved. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the LICENSE file included in this + * release for licensing terms and conditions. + */ + +#include "common.h" +#include "regs.h" + +/* + * # of exact address filters. The first one is used for the station address, + * the rest are available for multicast addresses. + */ +#define EXACT_ADDR_FILTERS 8 + +static inline int macidx(const struct cmac *mac) +{ + return mac->offset / (XGMAC0_1_BASE_ADDR - XGMAC0_0_BASE_ADDR); +} + +static void xaui_serdes_reset(struct cmac *mac) +{ + static unsigned int clear[] = { + F_PWRDN0 | F_PWRDN1, F_RESETPLL01, F_RESET0 | F_RESET1, + F_PWRDN2 | F_PWRDN3, F_RESETPLL23, F_RESET2 | F_RESET3 + }; + + int i; + adapter_t *adap = mac->adapter; + u32 ctrl = A_XGM_SERDES_CTRL0 + mac->offset; + + t3_write_reg(adap, ctrl, adap->params.vpd.xauicfg[macidx(mac)] | + F_RESET3 | F_RESET2 | F_RESET1 | F_RESET0 | + F_PWRDN3 | F_PWRDN2 | F_PWRDN1 | F_PWRDN0 | + F_RESETPLL23 | F_RESETPLL01); + (void)t3_read_reg(adap, ctrl); + + for (i = 0; i < ARRAY_SIZE(clear); i++) { + t3_set_reg_field(adap, ctrl, clear[i], 0); + udelay(10); + } + for (i = 0; i < ARRAY_SIZE(clear); i++) { + t3_set_reg_field(adap, ctrl, 0, clear[i]); + udelay(10); + } + for (i = 0; i < ARRAY_SIZE(clear); i++) { + t3_set_reg_field(adap, ctrl, clear[i], 0); + udelay(10); + } +} + +int t3_mac_reset(struct cmac *mac) +{ + static struct addr_val_pair mac_reset_avp[] = { + { A_XGM_TX_CTRL, 0 }, + { A_XGM_RX_CTRL, 0 }, + { A_XGM_RX_CFG, F_DISPAUSEFRAMES | F_EN1536BFRAMES | + F_RMFCS | F_ENJUMBO | F_ENHASHMCAST }, + { A_XGM_RX_HASH_LOW, 0 }, + { A_XGM_RX_HASH_HIGH, 0 }, + { A_XGM_RX_EXACT_MATCH_LOW_1, 0 }, + { A_XGM_RX_EXACT_MATCH_LOW_2, 0 }, + { A_XGM_RX_EXACT_MATCH_LOW_3, 0 }, + { A_XGM_RX_EXACT_MATCH_LOW_4, 0 }, + { A_XGM_RX_EXACT_MATCH_LOW_5, 0 }, + { A_XGM_RX_EXACT_MATCH_LOW_6, 0 }, + { A_XGM_RX_EXACT_MATCH_LOW_7, 0 }, + { A_XGM_RX_EXACT_MATCH_LOW_8, 0 }, + { A_XGM_STAT_CTRL, F_CLRSTATS } + }; + u32 val; + adapter_t *adap = mac->adapter; + unsigned int oft = mac->offset; + + t3_write_reg(adap, A_XGM_RESET_CTRL + oft, F_MAC_RESET_); + (void) t3_read_reg(adap, A_XGM_RESET_CTRL + oft); /* flush */ + + t3_write_regs(adap, mac_reset_avp, ARRAY_SIZE(mac_reset_avp), oft); + t3_set_reg_field(adap, A_XGM_RXFIFO_CFG + oft, + F_RXSTRFRWRD | F_DISERRFRAMES, + uses_xaui(adap) ? 0 : F_RXSTRFRWRD); + + if (uses_xaui(adap)) { + if (adap->params.rev == 0) { + t3_set_reg_field(adap, A_XGM_SERDES_CTRL + oft, 0, + F_RXENABLE | F_TXENABLE); + if (t3_wait_op_done(adap, A_XGM_SERDES_STATUS1 + oft, + F_CMULOCK, 1, 5, 2)) { + CH_ERR("%s: MAC %d XAUI SERDES CMU lock failed\n", + adapter_name(adap), macidx(mac)); + return -1; + } + t3_set_reg_field(adap, A_XGM_SERDES_CTRL + oft, 0, + F_SERDESRESET_); + } else + xaui_serdes_reset(mac); + } + + if (adap->params.rev > 0) + t3_write_reg(adap, A_XGM_PAUSE_TIMER + oft, 0xf000); + + val = F_MAC_RESET_; + if (is_10G(adap)) + val |= F_PCS_RESET_; + else if (uses_xaui(adap)) + val |= F_PCS_RESET_ | F_XG2G_RESET_; + else + val |= F_RGMII_RESET_ | F_XG2G_RESET_; + t3_write_reg(adap, A_XGM_RESET_CTRL + oft, val); + (void) t3_read_reg(adap, A_XGM_RESET_CTRL + oft); /* flush */ + + memset(&mac->stats, 0, sizeof(mac->stats)); + return 0; +} + +/* + * Set the exact match register 'idx' to recognize the given Ethernet address. + */ +static void set_addr_filter(struct cmac *mac, int idx, const u8 *addr) +{ + u32 addr_lo, addr_hi; + unsigned int oft = mac->offset + idx * 8; + + addr_lo = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0]; + addr_hi = (addr[5] << 8) | addr[4]; + + t3_write_reg(mac->adapter, A_XGM_RX_EXACT_MATCH_LOW_1 + oft, addr_lo); + t3_write_reg(mac->adapter, A_XGM_RX_EXACT_MATCH_HIGH_1 + oft, addr_hi); +} + +/* Set one of the station's unicast MAC addresses. */ +int t3_mac_set_address(struct cmac *mac, unsigned int idx, u8 addr[6]) +{ + if (idx >= mac->nucast) + return -EINVAL; + set_addr_filter(mac, idx, addr); + return 0; +} + +/* + * Specify the number of exact address filters that should be reserved for + * unicast addresses. Caller should reload the unicast and multicast addresses + * after calling this. + */ +int t3_mac_set_num_ucast(struct cmac *mac, int n) +{ + if (n > EXACT_ADDR_FILTERS) + return -EINVAL; + mac->nucast = n; + return 0; +} + +/* Calculate the RX hash filter index of an Ethernet address */ +static int hash_hw_addr(const u8 *addr) +{ + int hash = 0, octet, bit, i = 0, c; + + for (octet = 0; octet < 6; ++octet) + for (c = addr[octet], bit = 0; bit < 8; c >>= 1, ++bit) { + hash ^= (c & 1) << i; + if (++i == 6) + i = 0; + } + return hash; +} + +int t3_mac_set_rx_mode(struct cmac *mac, struct t3_rx_mode *rm) +{ + u32 val, hash_lo, hash_hi; + adapter_t *adap = mac->adapter; + unsigned int oft = mac->offset; + + val = t3_read_reg(adap, A_XGM_RX_CFG + oft) & ~F_COPYALLFRAMES; + if (promisc_rx_mode(rm)) + val |= F_COPYALLFRAMES; + t3_write_reg(adap, A_XGM_RX_CFG + oft, val); + + if (allmulti_rx_mode(rm)) + hash_lo = hash_hi = 0xffffffff; + else { + u8 *addr; + int exact_addr_idx = mac->nucast; + + hash_lo = hash_hi = 0; + while ((addr = t3_get_next_mcaddr(rm))) + if (exact_addr_idx < EXACT_ADDR_FILTERS) + set_addr_filter(mac, exact_addr_idx++, addr); + else { + int hash = hash_hw_addr(addr); + + if (hash < 32) + hash_lo |= (1 << hash); + else + hash_hi |= (1 << (hash - 32)); + } + } + + t3_write_reg(adap, A_XGM_RX_HASH_LOW + oft, hash_lo); + t3_write_reg(adap, A_XGM_RX_HASH_HIGH + oft, hash_hi); + return 0; +} + +int t3_mac_set_mtu(struct cmac *mac, unsigned int mtu) +{ + int hwm, lwm; + unsigned int thres, v; + adapter_t *adap = mac->adapter; + + /* + * MAX_FRAME_SIZE inludes header + FCS, mtu doesn't. The HW max + * packet size register includes header, but not FCS. + */ + mtu += 14; + if (mtu > MAX_FRAME_SIZE - 4) + return -EINVAL; + t3_write_reg(adap, A_XGM_RX_MAX_PKT_SIZE + mac->offset, mtu); + + /* + * Adjust the PAUSE frame watermarks. We always set the LWM, and the + * HWM only if flow-control is enabled. + */ + hwm = max(MAC_RXFIFO_SIZE - 3 * mtu, MAC_RXFIFO_SIZE / 2U); + hwm = min(hwm, 3 * MAC_RXFIFO_SIZE / 4 + 1024); + lwm = hwm - 1024; + v = t3_read_reg(adap, A_XGM_RXFIFO_CFG + mac->offset); + v &= ~V_RXFIFOPAUSELWM(M_RXFIFOPAUSELWM); + v |= V_RXFIFOPAUSELWM(lwm / 8); + if (G_RXFIFOPAUSEHWM(v)) + v = (v & ~V_RXFIFOPAUSEHWM(M_RXFIFOPAUSEHWM)) | + V_RXFIFOPAUSEHWM(hwm / 8); + t3_write_reg(adap, A_XGM_RXFIFO_CFG + mac->offset, v); + + /* Adjust the TX FIFO threshold based on the MTU */ + thres = (adap->params.vpd.cclk * 1000) / 15625; + thres = (thres * mtu) / 1000; + if (is_10G(adap)) + thres /= 10; + thres = mtu > thres ? (mtu - thres + 7) / 8 : 0; + thres = max(thres, 8U); /* need at least 8 */ + t3_set_reg_field(adap, A_XGM_TXFIFO_CFG + mac->offset, + V_TXFIFOTHRESH(M_TXFIFOTHRESH), + V_TXFIFOTHRESH(thres)); + return 0; +} + +int t3_mac_set_speed_duplex_fc(struct cmac *mac, int speed, int duplex, int fc) +{ + u32 val; + adapter_t *adap = mac->adapter; + unsigned int oft = mac->offset; + + if (duplex >= 0 && duplex != DUPLEX_FULL) + return -EINVAL; + if (speed >= 0) { + if (speed == SPEED_10) + val = V_PORTSPEED(0); + else if (speed == SPEED_100) + val = V_PORTSPEED(1); + else if (speed == SPEED_1000) + val = V_PORTSPEED(2); + else if (speed == SPEED_10000) + val = V_PORTSPEED(3); + else + return -EINVAL; + + t3_set_reg_field(adap, A_XGM_PORT_CFG + oft, + V_PORTSPEED(M_PORTSPEED), val); + } + + val = t3_read_reg(adap, A_XGM_RXFIFO_CFG + oft); + val &= ~V_RXFIFOPAUSEHWM(M_RXFIFOPAUSEHWM); + if (fc & PAUSE_TX) + val |= V_RXFIFOPAUSEHWM(G_RXFIFOPAUSELWM(val) + 128); /* +1KB */ + t3_write_reg(adap, A_XGM_RXFIFO_CFG + oft, val); + + t3_set_reg_field(adap, A_XGM_TX_CFG + oft, F_TXPAUSEEN, + (fc & PAUSE_RX) ? F_TXPAUSEEN : 0); + return 0; +} + +int t3_mac_enable(struct cmac *mac, int which) +{ + int idx = macidx(mac); + adapter_t *adap = mac->adapter; + unsigned int oft = mac->offset; + + if (which & MAC_DIRECTION_TX) { + t3_write_reg(adap, A_XGM_TX_CTRL + oft, F_TXEN); + t3_write_reg(adap, A_TP_PIO_ADDR, A_TP_TX_DROP_CFG_CH0 + idx); + t3_write_reg(adap, A_TP_PIO_DATA, 0xbf000001); + t3_write_reg(adap, A_TP_PIO_ADDR, A_TP_TX_DROP_MODE); + t3_set_reg_field(adap, A_TP_PIO_DATA, 1 << idx, 1 << idx); + } + if (which & MAC_DIRECTION_RX) + t3_write_reg(adap, A_XGM_RX_CTRL + oft, F_RXEN); + return 0; +} + +int t3_mac_disable(struct cmac *mac, int which) +{ + int idx = macidx(mac); + adapter_t *adap = mac->adapter; + + if (which & MAC_DIRECTION_TX) { + t3_write_reg(adap, A_XGM_TX_CTRL + mac->offset, 0); + t3_write_reg(adap, A_TP_PIO_ADDR, A_TP_TX_DROP_CFG_CH0 + idx); + t3_write_reg(adap, A_TP_PIO_DATA, 0xc000001f); + t3_write_reg(adap, A_TP_PIO_ADDR, A_TP_TX_DROP_MODE); + t3_set_reg_field(adap, A_TP_PIO_DATA, 1 << idx, 0); + } + if (which & MAC_DIRECTION_RX) + t3_write_reg(adap, A_XGM_RX_CTRL + mac->offset, 0); + return 0; +} + +/* + * This function is called periodically to accumulate the current values of the + * RMON counters into the port statistics. Since the packet counters are only + * 32 bits they can overflow in ~286 secs at 10G, so the function should be + * called more frequently than that. The byte counters are 45-bit wide, they + * would overflow in ~7.8 hours. + */ +const struct mac_stats *t3_mac_update_stats(struct cmac *mac) +{ +#define RMON_READ(mac, addr) t3_read_reg(mac->adapter, addr + mac->offset) +#define RMON_UPDATE(mac, name, reg) \ + (mac)->stats.name += (u64)RMON_READ(mac, A_XGM_STAT_##reg) +#define RMON_UPDATE64(mac, name, reg_lo, reg_hi) \ + (mac)->stats.name += RMON_READ(mac, A_XGM_STAT_##reg_lo) + \ + ((u64)RMON_READ(mac, A_XGM_STAT_##reg_hi) << 32) + + u32 v, lo; + + RMON_UPDATE64(mac, rx_octets, RX_BYTES_LOW, RX_BYTES_HIGH); + RMON_UPDATE64(mac, rx_frames, RX_FRAMES_LOW, RX_FRAMES_HIGH); + RMON_UPDATE(mac, rx_mcast_frames, RX_MCAST_FRAMES); + RMON_UPDATE(mac, rx_bcast_frames, RX_BCAST_FRAMES); + RMON_UPDATE(mac, rx_fcs_errs, RX_CRC_ERR_FRAMES); + RMON_UPDATE(mac, rx_pause, RX_PAUSE_FRAMES); + RMON_UPDATE(mac, rx_jabber, RX_JABBER_FRAMES); + RMON_UPDATE(mac, rx_short, RX_SHORT_FRAMES); + RMON_UPDATE(mac, rx_symbol_errs, RX_SYM_CODE_ERR_FRAMES); + + RMON_UPDATE(mac, rx_too_long, RX_OVERSIZE_FRAMES); + mac->stats.rx_too_long += RMON_READ(mac, A_XGM_RX_MAX_PKT_SIZE_ERR_CNT); + + RMON_UPDATE(mac, rx_frames_64, RX_64B_FRAMES); + RMON_UPDATE(mac, rx_frames_65_127, RX_65_127B_FRAMES); + RMON_UPDATE(mac, rx_frames_128_255, RX_128_255B_FRAMES); + RMON_UPDATE(mac, rx_frames_256_511, RX_256_511B_FRAMES); + RMON_UPDATE(mac, rx_frames_512_1023, RX_512_1023B_FRAMES); + RMON_UPDATE(mac, rx_frames_1024_1518, RX_1024_1518B_FRAMES); + RMON_UPDATE(mac, rx_frames_1519_max, RX_1519_MAXB_FRAMES); + + RMON_UPDATE64(mac, tx_octets, TX_BYTE_LOW, TX_BYTE_HIGH); + RMON_UPDATE64(mac, tx_frames, TX_FRAME_LOW, TX_FRAME_HIGH); + RMON_UPDATE(mac, tx_mcast_frames, TX_MCAST); + RMON_UPDATE(mac, tx_bcast_frames, TX_BCAST); + RMON_UPDATE(mac, tx_pause, TX_PAUSE); + /* This counts error frames in general (bad FCS, underrun, etc). */ + RMON_UPDATE(mac, tx_underrun, TX_ERR_FRAMES); + + RMON_UPDATE(mac, tx_frames_64, TX_64B_FRAMES); + RMON_UPDATE(mac, tx_frames_65_127, TX_65_127B_FRAMES); + RMON_UPDATE(mac, tx_frames_128_255, TX_128_255B_FRAMES); + RMON_UPDATE(mac, tx_frames_256_511, TX_256_511B_FRAMES); + RMON_UPDATE(mac, tx_frames_512_1023, TX_512_1023B_FRAMES); + RMON_UPDATE(mac, tx_frames_1024_1518, TX_1024_1518B_FRAMES); + RMON_UPDATE(mac, tx_frames_1519_max, TX_1519_MAXB_FRAMES); + + /* The next stat isn't clear-on-read. */ + t3_write_reg(mac->adapter, A_TP_MIB_INDEX, mac->offset ? 51 : 50); + v = t3_read_reg(mac->adapter, A_TP_MIB_RDATA); + lo = (u32)mac->stats.rx_cong_drops; + mac->stats.rx_cong_drops += (u64)(v - lo); + + return &mac->stats; +} - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/