Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933187AbWKSUaS (ORCPT ); Sun, 19 Nov 2006 15:30:18 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S933172AbWKSUaR (ORCPT ); Sun, 19 Nov 2006 15:30:17 -0500 Received: from imf24aec.mail.bellsouth.net ([205.152.59.72]:23948 "EHLO imf24aec.mail.bellsouth.net") by vger.kernel.org with ESMTP id S933187AbWKSUaK (ORCPT ); Sun, 19 Nov 2006 15:30:10 -0500 Date: Sun, 19 Nov 2006 14:30:06 -0600 From: Jay Cliburn To: jeff@garzik.org Cc: shemminger@osdl.org, romieu@fr.zoreil.com, csnook@redhat.com, netdev@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 2/4] atl1: Header files for Attansic L1 driver Message-ID: <20061119203006.GC29736@osprey.hogchain.net> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline Content-Transfer-Encoding: 8bit User-Agent: Mutt/1.4.2.2i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 48086 Lines: 1357 From: Jay Cliburn This patch contains the header files needed by the Attansic L1 gigabit ethernet adapter driver. Signed-off-by: Jay Cliburn --- atl1.h | 251 ++++++++++++++ atl1_hw.h | 991 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ atl1_osdep.h | 78 ++++ 3 files changed, 1320 insertions(+) diff --git a/drivers/net/atl1/atl1.h b/drivers/net/atl1/atl1.h new file mode 100644 index 0000000..95a5fa1 --- /dev/null +++ b/drivers/net/atl1/atl1.h @@ -0,0 +1,251 @@ +/** atl1.h - atl1 main header + +Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. +Copyright(c) 2006 Chris Snook +Copyright(c) 2006 Jay Cliburn + +Derived from Intel e1000 driver +Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + +This program is free software; you can redistribute it and/or modify it +under the terms of the GNU General Public License as published by the Free +Software Foundation; either version 2 of the License, or (at your option) +any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT +ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +more details. + +You should have received a copy of the GNU General Public License along with +this program; if not, write to the Free Software Foundation, Inc., 59 +Temple Place - Suite 330, Boston, MA 02111-1307, USA. +*/ + +#ifndef _ATL1_H_ +#define _ATL1_H_ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "atl1_hw.h" + +#ifdef NETIF_F_TSO +#include +#endif + +#ifdef SIOCGMIIPHY +#include +#endif + +#ifdef SIOCETHTOOL +#include +#endif + +#ifdef NETIF_F_HW_VLAN_TX +#include +#endif + +#define BAR_0 0 + +#define LBYTESWAP( a ) ( ( ( (a) & 0x00ff00ff ) << 8 ) | ( ( (a) & 0xff00ff00 ) >> 8 ) ) +#define LONGSWAP( a ) ( ( LBYTESWAP( a ) << 16 ) | ( LBYTESWAP( a ) >> 16 ) ) +#define SHORTSWAP( a ) ( ( (a) << 8 ) | ( (a) >> 8 ) ) + +struct at_adapter; + +#define AT_MAX_INTR 3 + +#define AT_DEFAULT_TPD 256 +#define AT_MAX_TPD 1023 +#define AT_MIN_TPD 64 +#define AT_DEFAULT_RFD 512 +#define AT_MIN_RFD 128 +#define AT_MAX_RFD 2047 + +#define AT_DESC_UNUSED(R) \ + ((((R)->next_to_clean > (R)->next_to_use) ? 0 : (R)->count) + \ + (R)->next_to_clean - (R)->next_to_use - 1) + +#define AT_DESC_USED(R) \ + (((R)->next_to_clean > (R)->next_to_use) ? \ + ((R)->count+(R)->next_to_use-(R)->next_to_clean+1) : \ + ((R)->next_to_use-(R)->next_to_clean+1)) + +#define AT_GET_DESC(R, i, type) (&(((type *)((R)->desc))[i])) +#define AT_RFD_DESC(R, i) AT_GET_DESC(R, i, struct rx_free_desc) +#define AT_TPD_DESC(R, i) AT_GET_DESC(R, i, struct tx_packet_desc) +#define AT_RRD_DESC(R, i) AT_GET_DESC(R, i, struct rx_return_desc) + +/** wrapper around a pointer to a socket buffer, + * so a DMA handle can be stored along with the buffer + */ +struct at_buffer { + struct sk_buff *skb; + u16 length; + u16 alloced; + dma_addr_t dma; +}; + +#define MAX_TX_BUF_LEN 0x3000 /* 12KB */ + +struct at_tpd_ring { + void *desc; /* pointer to the descriptor ring memory */ + dma_addr_t dma; /* physical adress of the descriptor ring */ + u16 size; /* length of descriptor ring in bytes */ + u16 count; /* number of descriptors in the ring */ + + u16 hw_idx; /* hardware index */ + atomic_t next_to_clean; + atomic_t next_to_use; + struct at_buffer *buffer_info; +}; + +struct at_rfd_ring { + void *desc; + dma_addr_t dma; + u16 size; + u16 count; + atomic_t next_to_use; + u16 next_to_clean; + struct at_buffer *buffer_info; +}; + +struct at_rrd_ring { + void *desc; + dma_addr_t dma; + unsigned int size; + u16 count; + u16 next_to_use; + atomic_t next_to_clean; +}; + +struct at_ring_header { + /* pointer to the descriptor ring memory */ + void *desc; + /* physical adress of the descriptor ring */ + dma_addr_t dma; + /* length of descriptor ring in bytes */ + unsigned int size; +}; + +struct at_cmb { + struct coals_msg_block *cmb; + dma_addr_t dma; +}; + +struct at_smb { + struct stats_msg_block *smb; + dma_addr_t dma; +}; + +/* Statistics counters */ +struct at_sft_stats { + u64 rx_packets; + u64 tx_packets; + u64 rx_bytes; + u64 tx_bytes; + u64 multicast; + u64 collisions; + u64 rx_errors; + u64 rx_length_errors; + u64 rx_crc_errors; + u64 rx_frame_errors; + u64 rx_fifo_errors; + u64 rx_missed_errors; + u64 tx_errors; + u64 tx_fifo_errors; + u64 tx_aborted_errors; + u64 tx_window_errors; + u64 tx_carrier_errors; + + u64 tx_pause; /* The number of Pause packet transmitted. */ + u64 excecol; /* The number of transmit packets aborted due to excessive collisions. */ + u64 deffer; /* The number of packets transmitted that is deferred. */ + u64 scc; /* The number of packets subsequently transmitted successfully with a single prior collision. */ + u64 mcc; /* The number of packets subsequently transmitted successfully with multiple prior collisions. */ + u64 latecol; /* The number of packets transmitted with late collisions. */ + u64 tx_underun; /* The number of transmit packets aborted due to transmit FIFO underrun, or TRD FIFO underrun */ + u64 tx_trunc; /* The number of transmit packets truncated due to size exceeding MTU, regardless if it is truncated by Selene or not. + * (The name is not really reflects the meaning in this case here.) */ + u64 rx_pause; /* The number of Pause packet received. */ + u64 rx_rrd_ov; + u64 rx_trunc; +}; + +/* board specific private data structure */ +#define AT_REGS_LEN 8 + +struct at_adapter { + /* OS defined structs */ + struct net_device *netdev; + struct pci_dev *pdev; + struct net_device_stats net_stats; + struct at_sft_stats soft_stats; + +#ifdef NETIF_F_HW_VLAN_TX + struct vlan_group *vlgrp; +#endif + u32 rx_buffer_len; + u32 wol; + u16 link_speed; + u16 link_duplex; + spinlock_t stats_lock; + spinlock_t tx_lock; + atomic_t irq_sem; + struct work_struct tx_timeout_task; + struct work_struct link_chg_task; + struct work_struct pcie_dma_to_rst_task; + struct timer_list watchdog_timer; + struct timer_list phy_config_timer; + bool phy_timer_pending; + + bool mac_disabled; + + /* All descriptor rings' memory */ + struct at_ring_header ring_header; + + /* TX */ + struct at_tpd_ring tpd_ring; + spinlock_t mb_lock; + + /* RX */ + struct at_rfd_ring rfd_ring; + struct at_rrd_ring rrd_ring; + u64 hw_csum_err; + u64 hw_csum_good; + + u32 gorcl; + u64 gorcl_old; + + /* Interrupt Moderator timer ( 2us resolution) */ + u16 imt; + /* Interrupt Clear timer (2us resolution) */ + u16 ict; + + /* structs defined in at_hw.h */ + u32 bd_number; /* board number */ + bool pci_using_64; + struct at_hw hw; + struct at_smb smb; + struct at_cmb cmb; + +#ifdef ETHTOOL_TEST + u32 test_icr; + struct at_ring_header test_ring_header; + struct at_tpd_ring test_tpd_ring; + struct at_rfd_ring test_rfd_ring; + struct at_rrd_ring test_rrd_ring; +#endif + u32 pci_state[16]; +}; + +#endif /* _ATL1_H_ */ diff --git a/drivers/net/atl1/atl1_hw.h b/drivers/net/atl1/atl1_hw.h new file mode 100644 index 0000000..0e3e2ab --- /dev/null +++ b/drivers/net/atl1/atl1_hw.h @@ -0,0 +1,991 @@ +/** atl1_hw.h - atl1 hardware definitions + +Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. +Copyright(c) 2006 Chris Snook +Copyright(c) 2006 Jay Cliburn + +Derived from Intel e1000 driver +Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + +This program is free software; you can redistribute it and/or modify it +under the terms of the GNU General Public License as published by the Free +Software Foundation; either version 2 of the License, or (at your option) +any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT +ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +more details. + +You should have received a copy of the GNU General Public License along with +this program; if not, write to the Free Software Foundation, Inc., 59 +Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +There are a lot of defines in here that are unused and/or have cryptic names. +Please leave them alone, as they're the closest thing we have to a spec from +Attansic at present. *ahem* -- CHS +*/ + +#ifndef _ATL1_HW_H_ +#define _ATL1_HW_H_ + +#include "atl1_osdep.h" + +#define _AT_ATTRIB_PACK_ __attribute__ ((packed)) + +struct at_adapter; +struct at_hw; + +/** function prototypes */ + +/** register definitions */ +#define REG_PCIE_CAP_LIST 0x58 + +#define REG_VPD_CAP 0x6C +#define VPD_CAP_ID_MASK 0xff +#define VPD_CAP_ID_SHIFT 0 +#define VPD_CAP_NEXT_PTR_MASK 0xFF +#define VPD_CAP_NEXT_PTR_SHIFT 8 +#define VPD_CAP_VPD_ADDR_MASK 0x7FFF +#define VPD_CAP_VPD_ADDR_SHIFT 16 +#define VPD_CAP_VPD_FLAG 0x80000000 + +#define REG_VPD_DATA 0x70 + +#define REG_SPI_FLASH_CTRL 0x200 +#define SPI_FLASH_CTRL_STS_NON_RDY 0x1 +#define SPI_FLASH_CTRL_STS_WEN 0x2 +#define SPI_FLASH_CTRL_STS_WPEN 0x80 +#define SPI_FLASH_CTRL_DEV_STS_MASK 0xFF +#define SPI_FLASH_CTRL_DEV_STS_SHIFT 0 +#define SPI_FLASH_CTRL_INS_MASK 0x7 +#define SPI_FLASH_CTRL_INS_SHIFT 8 +#define SPI_FLASH_CTRL_START 0x800 +#define SPI_FLASH_CTRL_EN_VPD 0x2000 +#define SPI_FLASH_CTRL_LDSTART 0x8000 +#define SPI_FLASH_CTRL_CS_HI_MASK 0x3 +#define SPI_FLASH_CTRL_CS_HI_SHIFT 16 +#define SPI_FLASH_CTRL_CS_HOLD_MASK 0x3 +#define SPI_FLASH_CTRL_CS_HOLD_SHIFT 18 +#define SPI_FLASH_CTRL_CLK_LO_MASK 0x3 +#define SPI_FLASH_CTRL_CLK_LO_SHIFT 20 +#define SPI_FLASH_CTRL_CLK_HI_MASK 0x3 +#define SPI_FLASH_CTRL_CLK_HI_SHIFT 22 +#define SPI_FLASH_CTRL_CS_SETUP_MASK 0x3 +#define SPI_FLASH_CTRL_CS_SETUP_SHIFT 24 +#define SPI_FLASH_CTRL_EROM_PGSZ_MASK 0x3 +#define SPI_FLASH_CTRL_EROM_PGSZ_SHIFT 26 +#define SPI_FLASH_CTRL_WAIT_READY 0x10000000 + +#define REG_SPI_ADDR 0x204 + +#define REG_SPI_DATA 0x208 + +#define REG_SPI_FLASH_CONFIG 0x20C +#define SPI_FLASH_CONFIG_LD_ADDR_MASK 0xFFFFFF +#define SPI_FLASH_CONFIG_LD_ADDR_SHIFT 0 +#define SPI_FLASH_CONFIG_VPD_ADDR_MASK 0x3 +#define SPI_FLASH_CONFIG_VPD_ADDR_SHIFT 24 +#define SPI_FLASH_CONFIG_LD_EXIST 0x4000000 + +#define REG_SPI_FLASH_OP_PROGRAM 0x210 +#define REG_SPI_FLASH_OP_SC_ERASE 0x211 +#define REG_SPI_FLASH_OP_CHIP_ERASE 0x212 +#define REG_SPI_FLASH_OP_RDID 0x213 +#define REG_SPI_FLASH_OP_WREN 0x214 +#define REG_SPI_FLASH_OP_RDSR 0x215 +#define REG_SPI_FLASH_OP_WRSR 0x216 +#define REG_SPI_FLASH_OP_READ 0x217 + +#define REG_TWSI_CTRL 0x218 +#define TWSI_CTRL_LD_OFFSET_MASK 0xFF +#define TWSI_CTRL_LD_OFFSET_SHIFT 0 +#define TWSI_CTRL_LD_SLV_ADDR_MASK 0x7 +#define TWSI_CTRL_LD_SLV_ADDR_SHIFT 8 +#define TWSI_CTRL_SW_LDSTART 0x800 +#define TWSI_CTRL_HW_LDSTART 0x1000 +#define TWSI_CTRL_SMB_SLV_ADDR_MASK 0x7F +#define TWSI_CTRL_SMB_SLV_ADDR_SHIFT 15 +#define TWSI_CTRL_LD_EXIST 0x400000 +#define TWSI_CTRL_READ_FREQ_SEL_MASK 0x3 +#define TWSI_CTRL_READ_FREQ_SEL_SHIFT 23 +#define TWSI_CTRL_FREQ_SEL_100K 0 +#define TWSI_CTRL_FREQ_SEL_200K 1 +#define TWSI_CTRL_FREQ_SEL_300K 2 +#define TWSI_CTRL_FREQ_SEL_400K 3 +#define TWSI_CTRL_SMB_SLV_ADDR +#define TWSI_CTRL_WRITE_FREQ_SEL_MASK 0x3 +#define TWSI_CTRL_WRITE_FREQ_SEL_SHIFT 24 + +#define REG_PCIE_DEV_MISC_CTRL 0x21C +#define PCIE_DEV_MISC_CTRL_EXT_PIPE 0x2 +#define PCIE_DEV_MISC_CTRL_RETRY_BUFDIS 0x1 +#define PCIE_DEV_MISC_CTRL_SPIROM_EXIST 0x4 +#define PCIE_DEV_MISC_CTRL_SERDES_ENDIAN 0x8 +#define PCIE_DEV_MISC_CTRL_SERDES_SEL_DIN 0x10 + +/** Selene Master Control Register */ +#define REG_MASTER_CTRL 0x1400 +#define MASTER_CTRL_SOFT_RST 0x1 +#define MASTER_CTRL_MTIMER_EN 0x2 +#define MASTER_CTRL_ITIMER_EN 0x4 +#define MASTER_CTRL_MANUAL_INT 0x8 +#define MASTER_CTRL_REV_NUM_SHIFT 16 +#define MASTER_CTRL_REV_NUM_MASK 0xff +#define MASTER_CTRL_DEV_ID_SHIFT 24 +#define MASTER_CTRL_DEV_ID_MASK 0xff + +/** Timer Initial Value Register */ +#define REG_MANUAL_TIMER_INIT 0x1404 + +/** IRQ ModeratorTimer Initial Value Register */ +#define REG_IRQ_MODU_TIMER_INIT 0x1408 + +#define REG_GPHY_ENABLE 0x140C + +/** IRQ Anti-Lost Timer Initial Value Register */ +#define REG_CMBDISDMA_TIMER 0x140E + +/** Block IDLE Status Register */ +#define REG_IDLE_STATUS 0x1410 +#define IDLE_STATUS_RXMAC 1 +#define IDLE_STATUS_TXMAC 2 +#define IDLE_STATUS_RXQ 4 +#define IDLE_STATUS_TXQ 8 +#define IDLE_STATUS_DMAR 0x10 +#define IDLE_STATUS_DMAW 0x20 +#define IDLE_STATUS_SMB 0x40 +#define IDLE_STATUS_CMB 0x80 + +/** MDIO Control Register */ +#define REG_MDIO_CTRL 0x1414 +#define MDIO_DATA_MASK 0xffff +#define MDIO_DATA_SHIFT 0 +#define MDIO_REG_ADDR_MASK 0x1f +#define MDIO_REG_ADDR_SHIFT 16 +#define MDIO_RW 0x200000 +#define MDIO_SUP_PREAMBLE 0x400000 +#define MDIO_START 0x800000 +#define MDIO_CLK_SEL_SHIFT 24 +#define MDIO_CLK_25_4 0 +#define MDIO_CLK_25_6 2 +#define MDIO_CLK_25_8 3 +#define MDIO_CLK_25_10 4 +#define MDIO_CLK_25_14 5 +#define MDIO_CLK_25_20 6 +#define MDIO_CLK_25_28 7 +#define MDIO_BUSY 0x8000000 +#define MDIO_WAIT_TIMES 30 + +/** MII PHY Status Register */ +#define REG_PHY_STATUS 0x1418 + +/** BIST Control and Status Register0 (for the Packet Memory) */ +#define REG_BIST0_CTRL 0x141c +#define BIST0_NOW 0x1 +#define BIST0_SRAM_FAIL 0x2 +#define BIST0_FUSE_FLAG 0x4 +#define REG_BIST1_CTRL 0x1420 +#define BIST1_NOW 0x1 +#define BIST1_SRAM_FAIL 0x2 +#define BIST1_FUSE_FLAG 0x4 + +/** MAC Control Register */ +#define REG_MAC_CTRL 0x1480 +#define MAC_CTRL_TX_EN 1 +#define MAC_CTRL_RX_EN 2 +#define MAC_CTRL_TX_FLOW 4 +#define MAC_CTRL_RX_FLOW 8 +#define MAC_CTRL_LOOPBACK 0x10 +#define MAC_CTRL_DUPLX 0x20 +#define MAC_CTRL_ADD_CRC 0x40 +#define MAC_CTRL_PAD 0x80 +#define MAC_CTRL_LENCHK 0x100 +#define MAC_CTRL_HUGE_EN 0x200 +#define MAC_CTRL_PRMLEN_SHIFT 10 +#define MAC_CTRL_PRMLEN_MASK 0xf +#define MAC_CTRL_RMV_VLAN 0x4000 +#define MAC_CTRL_PROMIS_EN 0x8000 +#define MAC_CTRL_TX_PAUSE 0x10000 +#define MAC_CTRL_SCNT 0x20000 +#define MAC_CTRL_SRST_TX 0x40000 +#define MAC_CTRL_TX_SIMURST 0x80000 +#define MAC_CTRL_SPEED_SHIFT 20 +#define MAC_CTRL_SPEED_MASK 0x300000 +#define MAC_CTRL_SPEED_1000 2 +#define MAC_CTRL_SPEED_10_100 1 +#define MAC_CTRL_DBG_TX_BKPRESURE 0x400000 +#define MAC_CTRL_TX_HUGE 0x800000 +#define MAC_CTRL_RX_CHKSUM_EN 0x1000000 +#define MAC_CTRL_MC_ALL_EN 0x2000000 +#define MAC_CTRL_BC_EN 0x4000000 +#define MAC_CTRL_DBG 0x8000000 + +/** MAC IPG/IFG Control Register */ +#define REG_MAC_IPG_IFG 0x1484 +#define MAC_IPG_IFG_IPGT_SHIFT 0 +#define MAC_IPG_IFG_IPGT_MASK 0x7f +#define MAC_IPG_IFG_MIFG_SHIFT 8 +#define MAC_IPG_IFG_MIFG_MASK 0xff +#define MAC_IPG_IFG_IPGR1_SHIFT 16 +#define MAC_IPG_IFG_IPGR1_MASK 0x7f +#define MAC_IPG_IFG_IPGR2_SHIFT 24 +#define MAC_IPG_IFG_IPGR2_MASK 0x7f + +/** MAC STATION ADDRESS */ +#define REG_MAC_STA_ADDR 0x1488 + +/** Hash table for multicast address */ +#define REG_RX_HASH_TABLE 0x1490 + +/** MAC Half-Duplex Control Register */ +#define REG_MAC_HALF_DUPLX_CTRL 0x1498 +#define MAC_HALF_DUPLX_CTRL_LCOL_SHIFT 0 +#define MAC_HALF_DUPLX_CTRL_LCOL_MASK 0x3ff +#define MAC_HALF_DUPLX_CTRL_RETRY_SHIFT 12 +#define MAC_HALF_DUPLX_CTRL_RETRY_MASK 0xf +#define MAC_HALF_DUPLX_CTRL_EXC_DEF_EN 0x10000 +#define MAC_HALF_DUPLX_CTRL_NO_BACK_C 0x20000 +#define MAC_HALF_DUPLX_CTRL_NO_BACK_P 0x40000 +#define MAC_HALF_DUPLX_CTRL_ABEBE 0x80000 +#define MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT 20 +#define MAC_HALF_DUPLX_CTRL_ABEBT_MASK 0xf +#define MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT 24 +#define MAC_HALF_DUPLX_CTRL_JAMIPG_MASK 0xf + +/** Maximum Frame Length Control Register */ +#define REG_MTU 0x149c + +/** Wake-On-Lan control register */ +#define REG_WOL_CTRL 0x14a0 +#define WOL_PATTERN_EN 0x00000001 +#define WOL_PATTERN_PME_EN 0x00000002 +#define WOL_MAGIC_EN 0x00000004 +#define WOL_MAGIC_PME_EN 0x00000008 +#define WOL_LINK_CHG_EN 0x00000010 +#define WOL_LINK_CHG_PME_EN 0x00000020 +#define WOL_PATTERN_ST 0x00000100 +#define WOL_MAGIC_ST 0x00000200 +#define WOL_LINKCHG_ST 0x00000400 +#define WOL_CLK_SWITCH_EN 0x00008000 +#define WOL_PT0_EN 0x00010000 +#define WOL_PT1_EN 0x00020000 +#define WOL_PT2_EN 0x00040000 +#define WOL_PT3_EN 0x00080000 +#define WOL_PT4_EN 0x00100000 +#define WOL_PT5_EN 0x00200000 +#define WOL_PT6_EN 0x00400000 + +/** WOL Length ( 2 DWORD ) */ +#define REG_WOL_PATTERN_LEN 0x14a4 +#define WOL_PT_LEN_MASK 0x7f +#define WOL_PT0_LEN_SHIFT 0 +#define WOL_PT1_LEN_SHIFT 8 +#define WOL_PT2_LEN_SHIFT 16 +#define WOL_PT3_LEN_SHIFT 24 +#define WOL_PT4_LEN_SHIFT 0 +#define WOL_PT5_LEN_SHIFT 8 +#define WOL_PT6_LEN_SHIFT 16 + +/** Internal SRAM Partition Register */ +#define REG_SRAM_RFD_ADDR 0x1500 +#define REG_SRAM_RFD_LEN (REG_SRAM_RFD_ADDR+ 4) +#define REG_SRAM_RRD_ADDR (REG_SRAM_RFD_ADDR+ 8) +#define REG_SRAM_RRD_LEN (REG_SRAM_RFD_ADDR+12) +#define REG_SRAM_TPD_ADDR (REG_SRAM_RFD_ADDR+16) +#define REG_SRAM_TPD_LEN (REG_SRAM_RFD_ADDR+20) +#define REG_SRAM_TRD_ADDR (REG_SRAM_RFD_ADDR+24) +#define REG_SRAM_TRD_LEN (REG_SRAM_RFD_ADDR+28) +#define REG_SRAM_RXF_ADDR (REG_SRAM_RFD_ADDR+32) +#define REG_SRAM_RXF_LEN (REG_SRAM_RFD_ADDR+36) +#define REG_SRAM_TXF_ADDR (REG_SRAM_RFD_ADDR+40) +#define REG_SRAM_TXF_LEN (REG_SRAM_RFD_ADDR+44) +#define REG_SRAM_TCPH_PATH_ADDR (REG_SRAM_RFD_ADDR+48) +#define SRAM_TCPH_ADDR_MASK 0x0fff +#define SRAM_TCPH_ADDR_SHIFT 0 +#define SRAM_PATH_ADDR_MASK 0x0fff +#define SRAM_PATH_ADDR_SHIFT 16 + +/** Load Ptr Register */ +#define REG_LOAD_PTR (REG_SRAM_RFD_ADDR+52) + +/** Descriptor Control register */ +#define REG_DESC_BASE_ADDR_HI 0x1540 +#define REG_DESC_RFD_ADDR_LO (REG_DESC_BASE_ADDR_HI+4) +#define REG_DESC_RRD_ADDR_LO (REG_DESC_BASE_ADDR_HI+8) +#define REG_DESC_TPD_ADDR_LO (REG_DESC_BASE_ADDR_HI+12) +#define REG_DESC_CMB_ADDR_LO (REG_DESC_BASE_ADDR_HI+16) +#define REG_DESC_SMB_ADDR_LO (REG_DESC_BASE_ADDR_HI+20) +#define REG_DESC_RFD_RRD_RING_SIZE (REG_DESC_BASE_ADDR_HI+24) +#define DESC_RFD_RING_SIZE_MASK 0x7ff +#define DESC_RFD_RING_SIZE_SHIFT 0 +#define DESC_RRD_RING_SIZE_MASK 0x7ff +#define DESC_RRD_RING_SIZE_SHIFT 16 +#define REG_DESC_TPD_RING_SIZE (REG_DESC_BASE_ADDR_HI+28) +#define DESC_TPD_RING_SIZE_MASK 0x3ff +#define DESC_TPD_RING_SIZE_SHIFT 0 + +/** TXQ Control Register */ +#define REG_TXQ_CTRL 0x1580 +#define TXQ_CTRL_TPD_BURST_NUM_SHIFT 0 +#define TXQ_CTRL_TPD_BURST_NUM_MASK 0x1f +#define TXQ_CTRL_EN 0x20 +#define TXQ_CTRL_ENH_MODE 0x40 +#define TXQ_CTRL_TPD_FETCH_TH_SHIFT 8 +#define TXQ_CTRL_TPD_FETCH_TH_MASK 0x3f +#define TXQ_CTRL_TXF_BURST_NUM_SHIFT 16 +#define TXQ_CTRL_TXF_BURST_NUM_MASK 0xffff + +/** Jumbo packet Threshold for task offload */ +#define REG_TX_JUMBO_TASK_TH_TPD_IPG 0x1584 +#define TX_JUMBO_TASK_TH_MASK 0x7ff +#define TX_JUMBO_TASK_TH_SHIFT 0 +#define TX_TPD_MIN_IPG_MASK 0x1f +#define TX_TPD_MIN_IPG_SHIFT 16 + +/** RXQ Control Register */ +#define REG_RXQ_CTRL 0x15a0 +#define RXQ_CTRL_RFD_BURST_NUM_SHIFT 0 +#define RXQ_CTRL_RFD_BURST_NUM_MASK 0xff +#define RXQ_CTRL_RRD_BURST_THRESH_SHIFT 8 +#define RXQ_CTRL_RRD_BURST_THRESH_MASK 0xff +#define RXQ_CTRL_RFD_PREF_MIN_IPG_SHIFT 16 +#define RXQ_CTRL_RFD_PREF_MIN_IPG_MASK 0x1f +#define RXQ_CTRL_CUT_THRU_EN 0x40000000 +#define RXQ_CTRL_EN 0x80000000 + +/** Rx jumbo packet threshold and rrd retirement timer */ +#define REG_RXQ_JMBOSZ_RRDTIM (REG_RXQ_CTRL+ 4) +#define RXQ_JMBOSZ_TH_MASK 0x7ff +#define RXQ_JMBOSZ_TH_SHIFT 0 +#define RXQ_JMBO_LKAH_MASK 0xf +#define RXQ_JMBO_LKAH_SHIFT 11 +#define RXQ_RRD_TIMER_MASK 0xffff +#define RXQ_RRD_TIMER_SHIFT 16 + +/** RFD flow control register */ +#define REG_RXQ_RXF_PAUSE_THRESH (REG_RXQ_CTRL+ 8) +#define RXQ_RXF_PAUSE_TH_HI_SHIFT 16 +#define RXQ_RXF_PAUSE_TH_HI_MASK 0xfff +#define RXQ_RXF_PAUSE_TH_LO_SHIFT 0 +#define RXQ_RXF_PAUSE_TH_LO_MASK 0xfff + +/** RRD flow control register */ +#define REG_RXQ_RRD_PAUSE_THRESH (REG_RXQ_CTRL+12) +#define RXQ_RRD_PAUSE_TH_HI_SHIFT 0 +#define RXQ_RRD_PAUSE_TH_HI_MASK 0xfff +#define RXQ_RRD_PAUSE_TH_LO_SHIFT 16 +#define RXQ_RRD_PAUSE_TH_LO_MASK 0xfff + +/** DMA Engine Control Register */ +#define REG_DMA_CTRL 0x15c0 +#define DMA_CTRL_DMAR_IN_ORDER 0x1 +#define DMA_CTRL_DMAR_ENH_ORDER 0x2 +#define DMA_CTRL_DMAR_OUT_ORDER 0x4 +#define DMA_CTRL_RCB_VALUE 0x8 +#define DMA_CTRL_DMAR_BURST_LEN_SHIFT 4 +#define DMA_CTRL_DMAR_BURST_LEN_MASK 7 +#define DMA_CTRL_DMAW_BURST_LEN_SHIFT 7 +#define DMA_CTRL_DMAW_BURST_LEN_MASK 7 +#define DMA_CTRL_DMAR_EN 0x400 +#define DMA_CTRL_DMAW_EN 0x800 + +/** CMB/SMB Control Register */ +#define REG_CSMB_CTRL 0x15d0 +#define CSMB_CTRL_CMB_NOW 1 +#define CSMB_CTRL_SMB_NOW 2 +#define CSMB_CTRL_CMB_EN 4 +#define CSMB_CTRL_SMB_EN 8 + +/** CMB DMA Write Threshold Register */ +#define REG_CMB_WRITE_TH (REG_CSMB_CTRL+ 4) +#define CMB_RRD_TH_SHIFT 0 +#define CMB_RRD_TH_MASK 0x7ff +#define CMB_TPD_TH_SHIFT 16 +#define CMB_TPD_TH_MASK 0x7ff + +/** RX/TX count-down timer to trigger CMB-write. 2us resolution. */ +#define REG_CMB_WRITE_TIMER (REG_CSMB_CTRL+ 8) +#define CMB_RX_TM_SHIFT 0 +#define CMB_RX_TM_MASK 0xffff +#define CMB_TX_TM_SHIFT 16 +#define CMB_TX_TM_MASK 0xffff + +/** Number of packet received since last CMB write */ +#define REG_CMB_RX_PKT_CNT (REG_CSMB_CTRL+12) + +/** Number of packet transmitted since last CMB write */ +#define REG_CMB_TX_PKT_CNT (REG_CSMB_CTRL+16) + +/** SMB auto DMA timer register */ +#define REG_SMB_TIMER (REG_CSMB_CTRL+20) + +/** Mailbox Register */ +#define REG_MAILBOX 0x15f0 +#define MB_RFD_PROD_INDX_SHIFT 0 +#define MB_RFD_PROD_INDX_MASK 0x7ff +#define MB_RRD_CONS_INDX_SHIFT 11 +#define MB_RRD_CONS_INDX_MASK 0x7ff +#define MB_TPD_PROD_INDX_SHIFT 22 +#define MB_TPD_PROD_INDX_MASK 0x3ff + +/** Interrupt Status Register */ +#define REG_ISR 0x1600 +#define ISR_SMB 1 +#define ISR_TIMER 2 +#define ISR_MANUAL 4 +#define ISR_RXF_OV 8 +#define ISR_RFD_UNRUN 0x10 +#define ISR_RRD_OV 0x20 +#define ISR_TXF_UNRUN 0x40 +#define ISR_LINK 0x80 +#define ISR_HOST_RFD_UNRUN 0x100 +#define ISR_HOST_RRD_OV 0x200 +#define ISR_DMAR_TO_RST 0x400 +#define ISR_DMAW_TO_RST 0x800 +#define ISR_GPHY 0x1000 +#define ISR_RX_PKT 0x10000 +#define ISR_TX_PKT 0x20000 +#define ISR_TX_DMA 0x40000 +#define ISR_RX_DMA 0x80000 +#define ISR_CMB_RX 0x100000 +#define ISR_CMB_TX 0x200000 +#define ISR_MAC_RX 0x400000 +#define ISR_MAC_TX 0x800000 +#define ISR_UR_DETECTED 0x1000000 +#define ISR_FERR_DETECTED 0x2000000 +#define ISR_NFERR_DETECTED 0x4000000 +#define ISR_CERR_DETECTED 0x8000000 +#define ISR_PHY_LINKDOWN 0x10000000 +#define ISR_DIS_SMB 0x20000000 +#define ISR_DIS_DMA 0x40000000 +#define ISR_DIS_INT 0x80000000 + +/** Interrupt Mask Register */ +#define REG_IMR 0x1604 + +/** Normal Interrupt mask */ +#define IMR_NORMAL_MASK (\ + ISR_SMB |\ + ISR_GPHY |\ + ISR_PHY_LINKDOWN|\ + ISR_DMAR_TO_RST |\ + ISR_DMAW_TO_RST |\ + ISR_CMB_TX |\ + ISR_CMB_RX ) + +/** Debug Interrupt Mask (enable all interrupt) */ +#define IMR_DEBUG_MASK (\ + ISR_SMB |\ + ISR_TIMER |\ + ISR_MANUAL |\ + ISR_RXF_OV |\ + ISR_RFD_UNRUN |\ + ISR_RRD_OV |\ + ISR_TXF_UNRUN |\ + ISR_LINK |\ + ISR_CMB_TX |\ + ISR_CMB_RX |\ + ISR_RX_PKT |\ + ISR_TX_PKT |\ + ISR_MAC_RX |\ + ISR_MAC_TX ) + +/** Interrupt Status Register */ +#define REG_RFD_RRD_IDX 0x1800 +#define REG_TPD_IDX 0x1804 + +/** MII definition + * PHY Common Register */ +#define MII_BMCR 0x00 +#define MII_BMSR 0x01 +#define MII_PHYSID1 0x02 +#define MII_PHYSID2 0x03 +#define MII_ADVERTISE 0x04 +#define MII_LPA 0x05 +#define MII_EXPANSION 0x06 +#define MII_AT001_CR 0x09 +#define MII_AT001_SR 0x0A +#define MII_AT001_ESR 0x0F +#define MII_AT001_PSCR 0x10 +#define MII_AT001_PSSR 0x11 +#define MII_DCOUNTER 0x12 +#define MII_FCSCOUNTER 0x13 +#define MII_NWAYTEST 0x14 +#define MII_RERRCOUNTER 0x15 +#define MII_SREVISION 0x16 +#define MII_RESV1 0x17 +#define MII_LBRERROR 0x18 +#define MII_PHYADDR 0x19 +#define MII_RESV2 0x1a +#define MII_TPISTATUS 0x1b +#define MII_NCONFIG 0x1c + +/** PHY Control Register */ +#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */ +#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */ +#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ +#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ +#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */ +#define MII_CR_POWER_DOWN 0x0800 /* Power down */ +#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ +#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */ +#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ +#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ +#define MII_CR_SPEED_MASK 0x2040 +#define MII_CR_SPEED_1000 0x0040 +#define MII_CR_SPEED_100 0x2000 +#define MII_CR_SPEED_10 0x0000 + +/** PHY Status Register */ +#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */ +#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */ +#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */ +#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */ +#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */ +#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */ +#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */ +#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */ +#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */ +#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */ +#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */ +#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */ +#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */ +#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */ +#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */ + +/** Link partner ability register. */ +#define MII_LPA_SLCT 0x001f /* Same as advertise selector */ +#define MII_LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */ +#define MII_LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */ +#define MII_LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */ +#define MII_LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */ +#define MII_LPA_100BASE4 0x0200 /* 100BASE-T4 */ +#define MII_LPA_PAUSE 0x0400 /* PAUSE */ +#define MII_LPA_ASYPAUSE 0x0800 /* Asymmetrical PAUSE */ +#define MII_LPA_RFAULT 0x2000 /* Link partner faulted */ +#define MII_LPA_LPACK 0x4000 /* Link partner acked us */ +#define MII_LPA_NPAGE 0x8000 /* Next page bit */ + +/** Autoneg Advertisement Register */ +#define MII_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */ +#define MII_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */ +#define MII_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */ +#define MII_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */ +#define MII_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */ +#define MII_AR_100T4_CAPS 0x0200 /* 100T4 Capable */ +#define MII_AR_PAUSE 0x0400 /* Pause operation desired */ +#define MII_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */ +#define MII_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */ +#define MII_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */ +#define MII_AR_SPEED_MASK 0x01E0 +#define MII_AR_DEFAULT_CAP_MASK 0x0DE0 + +/** 1000BASE-T Control Register */ +#define MII_AT001_CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */ +#define MII_AT001_CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */ +#define MII_AT001_CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port, 0=DTE device */ +#define MII_AT001_CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master, 0=Configure PHY as Slave */ +#define MII_AT001_CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value, 0=Automatic Master/Slave config */ +#define MII_AT001_CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */ +#define MII_AT001_CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */ +#define MII_AT001_CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */ +#define MII_AT001_CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */ +#define MII_AT001_CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */ +#define MII_AT001_CR_1000T_SPEED_MASK 0x0300 +#define MII_AT001_CR_1000T_DEFAULT_CAP_MASK 0x0300 + +/** 1000BASE-T Status Register */ +#define MII_AT001_SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */ +#define MII_AT001_SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */ +#define MII_AT001_SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */ +#define MII_AT001_SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */ +#define MII_AT001_SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master, 0=Slave */ +#define MII_AT001_SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */ +#define MII_AT001_SR_1000T_REMOTE_RX_STATUS_SHIFT 12 +#define MII_AT001_SR_1000T_LOCAL_RX_STATUS_SHIFT 13 + +/** Extended Status Register */ +#define MII_AT001_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */ +#define MII_AT001_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */ +#define MII_AT001_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */ +#define MII_AT001_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */ + +/** AT001 PHY Specific Control Register */ +#define MII_AT001_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Function disabled */ +#define MII_AT001_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */ +#define MII_AT001_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */ +#define MII_AT001_PSCR_MAC_POWERDOWN 0x0008 +#define MII_AT001_PSCR_CLK125_DISABLE 0x0010 /* 1=CLK125 low, 0=CLK125 toggling */ +#define MII_AT001_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5, Manual MDI configuration */ +#define MII_AT001_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */ +#define MII_AT001_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover, 100BASE-TX/10BASE-T: MDI Mode */ +#define MII_AT001_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled all speeds. */ +#define MII_AT001_PSCR_10BT_EXT_DIST_ENABLE 0x0080 /* 1=Enable Extended 10BASE-T distance (Lower 10BASE-T RX Threshold), 0=Normal 10BASE-T RX Threshold */ +#define MII_AT001_PSCR_MII_5BIT_ENABLE 0x0100 /* 1=5-Bit interface in 100BASE-TX, 0=MII interface in 100BASE-TX */ +#define MII_AT001_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler disable */ +#define MII_AT001_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */ +#define MII_AT001_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */ +#define MII_AT001_PSCR_POLARITY_REVERSAL_SHIFT 1 +#define MII_AT001_PSCR_AUTO_X_MODE_SHIFT 5 +#define MII_AT001_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7 + +/** AT001 PHY Specific Status Register */ +#define MII_AT001_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */ +#define MII_AT001_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */ +#define MII_AT001_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */ +#define MII_AT001_PSSR_10MBS 0x0000 /* 00=10Mbs */ +#define MII_AT001_PSSR_100MBS 0x4000 /* 01=100Mbs */ +#define MII_AT001_PSSR_1000MBS 0x8000 /* 10=1000Mbs */ + +/** PCI Command Register Bit Definitions */ +#define PCI_REG_COMMAND 0x04 /* PCI Command Register */ +#define CMD_IO_SPACE 0x0001 +#define CMD_MEMORY_SPACE 0x0002 +#define CMD_BUS_MASTER 0x0004 + +/** Wake Up Filter Control */ +#define AT_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */ +#define AT_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */ +#define AT_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */ +#define AT_WUFC_MC 0x00000008 /* Multicast Wakeup Enable */ +#define AT_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */ + +/** Error Codes */ +#define AT_SUCCESS 0 +#define AT_ERR_EEPROM 1 +#define AT_ERR_PHY 2 +#define AT_ERR_CONFIG 3 +#define AT_ERR_PARAM 4 +#define AT_ERR_MAC_TYPE 5 +#define AT_ERR_PHY_TYPE 6 +#define AT_ERR_PHY_SPEED 7 +#define AT_ERR_PHY_RES 8 + +#define SPEED_0 0xffff +#define SPEED_10 10 +#define SPEED_100 100 +#define SPEED_1000 1000 +#define HALF_DUPLEX 1 +#define FULL_DUPLEX 2 + +#define MEDIA_TYPE_AUTO_SENSOR 0 +#define MEDIA_TYPE_1000M_FULL 1 +#define MEDIA_TYPE_100M_FULL 2 +#define MEDIA_TYPE_100M_HALF 3 +#define MEDIA_TYPE_10M_FULL 4 +#define MEDIA_TYPE_10M_HALF 5 + +#define ADVERTISE_10_HALF 0x0001 +#define ADVERTISE_10_FULL 0x0002 +#define ADVERTISE_100_HALF 0x0004 +#define ADVERTISE_100_FULL 0x0008 +#define ADVERTISE_1000_HALF 0x0010 +#define ADVERTISE_1000_FULL 0x0020 +#define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x002F /* Everything but 1000-Half */ +#define AUTONEG_ADVERTISE_10_100_ALL 0x000F /* All 10/100 speeds */ +#define AUTONEG_ADVERTISE_10_ALL 0x0003 /* 10Mbps Full & Half speeds */ + +/** The size (in bytes) of a ethernet packet */ +#define ENET_HEADER_SIZE 14 +#define MAXIMUM_ETHERNET_FRAME_SIZE 1518 /* with FCS */ +#define MINIMUM_ETHERNET_FRAME_SIZE 64 /* with FCS */ +#define ETHERNET_FCS_SIZE 4 +#define MAX_JUMBO_FRAME_SIZE 0x2800 + +#define PHY_AUTO_NEG_TIME 45 /* 4.5 Seconds */ +#define PHY_FORCE_TIME 20 /* 2.0 Seconds */ + +/** For checksumming , the sum of all words in the EEPROM should equal 0xBABA */ +#define EEPROM_SUM 0xBABA +#define NODE_ADDRESS_SIZE 6 + +/** Statistics counters collected by the MAC */ +struct stats_msg_block { + /* rx */ + u32 rx_ok; /* The number of good packet received. */ + u32 rx_bcast; /* The number of good broadcast packet received. */ + u32 rx_mcast; /* The number of good multicast packet received. */ + u32 rx_pause; /* The number of Pause packet received. */ + u32 rx_ctrl; /* The number of Control packet received other than Pause frame. */ + u32 rx_fcs_err; /* The number of packets with bad FCS. */ + u32 rx_len_err; /* The number of packets with mismatch of length field and actual size. */ + u32 rx_byte_cnt; /* The number of bytes of good packet received. FCS is NOT included. */ + u32 rx_runt; /* The number of packets received that are less than 64 byte long and with good FCS. */ + u32 rx_frag; /* The number of packets received that are less than 64 byte long and with bad FCS. */ + u32 rx_sz_64; /* The number of good and bad packets received that are 64 byte long. */ + u32 rx_sz_65_127; /* The number of good and bad packets received that are between 65 and 127-byte long. */ + u32 rx_sz_128_255; /* The number of good and bad packets received that are between 128 and 255-byte long. */ + u32 rx_sz_256_511; /* The number of good and bad packets received that are between 256 and 511-byte long. */ + u32 rx_sz_512_1023; /* The number of good and bad packets received that are between 512 and 1023-byte long. */ + u32 rx_sz_1024_1518; /* The number of good and bad packets received that are between 1024 and 1518-byte long. */ + u32 rx_sz_1519_max; /* The number of good and bad packets received that are between 1519-byte and MTU. */ + u32 rx_sz_ov; /* The number of good and bad packets received that are more than MTU size šC truncated by Selene. */ + u32 rx_rxf_ov; /* The number of frame dropped due to occurrence of RX FIFO overflow. */ + u32 rx_rrd_ov; /* The number of frame dropped due to occurrence of RRD overflow. */ + u32 rx_align_err; /* Alignment Error */ + u32 rx_bcast_byte_cnt; /* The byte count of broadcast packet received, excluding FCS. */ + u32 rx_mcast_byte_cnt; /* The byte count of multicast packet received, excluding FCS. */ + u32 rx_err_addr; /* The number of packets dropped due to address filtering. */ + + /* tx */ + u32 tx_ok; /* The number of good packet transmitted. */ + u32 tx_bcast; /* The number of good broadcast packet transmitted. */ + u32 tx_mcast; /* The number of good multicast packet transmitted. */ + u32 tx_pause; /* The number of Pause packet transmitted. */ + u32 tx_exc_defer; /* The number of packets transmitted with excessive deferral. */ + u32 tx_ctrl; /* The number of packets transmitted is a control frame, excluding Pause frame. */ + u32 tx_defer; /* The number of packets transmitted that is deferred. */ + u32 tx_byte_cnt; /* The number of bytes of data transmitted. FCS is NOT included. */ + u32 tx_sz_64; /* The number of good and bad packets transmitted that are 64 byte long. */ + u32 tx_sz_65_127; /* The number of good and bad packets transmitted that are between 65 and 127-byte long. */ + u32 tx_sz_128_255; /* The number of good and bad packets transmitted that are between 128 and 255-byte long. */ + u32 tx_sz_256_511; /* The number of good and bad packets transmitted that are between 256 and 511-byte long. */ + u32 tx_sz_512_1023; /* The number of good and bad packets transmitted that are between 512 and 1023-byte long. */ + u32 tx_sz_1024_1518; /* The number of good and bad packets transmitted that are between 1024 and 1518-byte long. */ + u32 tx_sz_1519_max; /* The number of good and bad packets transmitted that are between 1519-byte and MTU. */ + u32 tx_1_col; /* The number of packets subsequently transmitted successfully with a single prior collision. */ + u32 tx_2_col; /* The number of packets subsequently transmitted successfully with multiple prior collisions. */ + u32 tx_late_col; /* The number of packets transmitted with late collisions. */ + u32 tx_abort_col; /* The number of transmit packets aborted due to excessive collisions. */ + u32 tx_underrun; /* The number of transmit packets aborted due to transmit FIFO underrun, or TRD FIFO underrun */ + u32 tx_rd_eop; /* The number of times that read beyond the EOP into the next frame area when TRD was not written timely */ + u32 tx_len_err; /* The number of transmit packets with length field does NOT match the actual frame size. */ + u32 tx_trunc; /* The number of transmit packets truncated due to size exceeding MTU. */ + u32 tx_bcast_byte; /* The byte count of broadcast packet transmitted, excluding FCS. */ + u32 tx_mcast_byte; /* The byte count of multicast packet transmitted, excluding FCS. */ + u32 smb_updated; /* 1: SMB Updated. This is used by software as the indication of the statistics update. + * Software should clear this bit as soon as retrieving the statistics information. */ +} _AT_ATTRIB_PACK_; + +/** Coalescing Message Block */ +struct coals_msg_block { + u32 int_stats; /* interrupt status */ + u16 rrd_prod_idx; /* TRD Producer Index. */ + u16 rfd_cons_idx; /* RFD Consumer Index. */ + u16 update; /* Selene sets this bit every time it DMA the CMB to host memory. + * Software supposes to clear this bit when CMB information is processed. */ + u16 tpd_cons_idx; /* TPD Consumer Index. */ +} _AT_ATTRIB_PACK_; + +/** RRD descriptor */ +struct rx_return_desc { + u8 num_buf; /* Number of RFD buffers used by the received packet */ + u8 resved; + u16 buf_indx; /* RFD Index of the first buffer */ + union { + u32 valid; + struct { + u16 rx_chksum; + u16 pkt_size; + } xsum_sz; + } xsz; + + u16 pkt_flg; /* Packet flags */ + u16 err_flg; /* Error flags */ + u16 resved2; + u16 vlan_tag; /* VLAN TAG */ +} _AT_ATTRIB_PACK_; + +#define PACKET_FLAG_ETH_TYPE 0x0080 +#define PACKET_FLAG_VLAN_INS 0x0100 +#define PACKET_FLAG_ERR 0x0200 +#define PACKET_FLAG_IPV4 0x0400 +#define PACKET_FLAG_UDP 0x0800 +#define PACKET_FLAG_TCP 0x1000 +#define PACKET_FLAG_BCAST 0x2000 +#define PACKET_FLAG_MCAST 0x4000 +#define PACKET_FLAG_PAUSE 0x8000 + +#define ERR_FLAG_CRC 0x0001 +#define ERR_FLAG_CODE 0x0002 +#define ERR_FLAG_DRIBBLE 0x0004 +#define ERR_FLAG_RUNT 0x0008 +#define ERR_FLAG_OV 0x0010 +#define ERR_FLAG_TRUNC 0x0020 +#define ERR_FLAG_IP_CHKSUM 0x0040 +#define ERR_FLAG_L4_CHKSUM 0x0080 +#define ERR_FLAG_LEN 0x0100 +#define ERR_FLAG_DES_ADDR 0x0200 + +/** RFD descriptor */ +struct rx_free_desc { + __le64 buffer_addr; /* Address of the descriptor's data buffer */ + __le16 buf_len; /* Size of the receive buffer in host memory, in byte */ + u16 coalese; /* Update consumer index to host after the reception of this frame */ +} _AT_ATTRIB_PACK_; + +/** TPD descriptor */ +struct tso_param { + unsigned buf_len:14; + unsigned dma_int:1; + unsigned pkt_int:1; + u16 valan_tag; + unsigned eop:1; + /* command */ + unsigned coalese:1; + unsigned ins_vlag:1; + unsigned custom_chksum:1; + unsigned segment:1; + unsigned ip_chksum:1; + unsigned tcp_chksum:1; + unsigned udp_chksum:1; + /* packet state */ + unsigned vlan_tagged:1; + unsigned eth_type:1; + unsigned iphl:4; + unsigned tcp_hdrlen:4; + unsigned hdr_flg:1; + unsigned mss:13; +} _AT_ATTRIB_PACK_; + +struct csum_param { + unsigned buf_len:14; + unsigned dma_int:1; + unsigned pkt_int:1; + u16 valan_tag; + unsigned eop:1; + /* command */ + unsigned coalese:1; + unsigned ins_vlag:1; + unsigned custom_chksum:1; + unsigned segment:1; + unsigned ip_chksum:1; + unsigned tcp_chksum:1; + unsigned udp_chksum:1; + /* packet state */ + unsigned vlan_tagged:1; + unsigned eth_type:1; + unsigned iphl:4; + unsigned:2; + unsigned payload_offset:8; + unsigned xsum_offset:8; +} _AT_ATTRIB_PACK_; + +union tpd_descr { + u64 data; + struct csum_param csum; + struct tso_param tso; +} _AT_ATTRIB_PACK_; + +struct tx_packet_desc { + __le64 buffer_addr; + union tpd_descr desc; +} _AT_ATTRIB_PACK_; + +/** DMA Order Settings */ +enum at_dma_order { + at_dma_ord_in = 1, + at_dma_ord_enh = 2, + at_dma_ord_out = 4 +}; + +enum at_dma_rcb { + at_rcb_64 = 0, + at_rcb_128 = 1 +}; + +enum at_dma_req_block { + at_dma_req_128 = 0, + at_dma_req_256 = 1, + at_dma_req_512 = 2, + at_dam_req_1024 = 3, + at_dam_req_2048 = 4, + at_dma_req_4096 = 5 +}; + +/* UNUSED - jkc 20061118 +enum at_speed_duplex_type { + at_10_half = 0, + at_10_full = 1, + at_100_half = 2, + at_100_full = 3 +}; +*/ + +struct spi_flash_dev { + const char *manu_name; /* manufacturer id */ + /* op-code */ + u8 cmd_wrsr; + u8 cmd_read; + u8 cmd_program; + u8 cmd_wren; + u8 cmd_wrdi; + u8 cmd_rdsr; + u8 cmd_rdid; + u8 cmd_sector_erase; + u8 cmd_chip_erase; +}; + +/** Structure containing variables used by the shared code */ +struct at_hw { + u8 __iomem *hw_addr; + void *back; + + enum at_dma_order dma_ord; + enum at_dma_rcb rcb_value; + enum at_dma_req_block dmar_block; + enum at_dma_req_block dmaw_block; + + u8 preamble_len; + u8 max_retry; /* Retransmission maximum , afterwards the packet will be discarded. */ + u8 jam_ipg; /* IPG to start JAM for collision based flow control in half-duplex mode. In unit of 8-bit time. */ + u8 ipgt; /* Desired back to back inter-packet gap. The default is 96-bit time. */ + u8 min_ifg; /* Minimum number of IFG to enforce in between RX frames. Frame gap below such IFP is dropped. */ + u8 ipgr1; /* 64bit Carrier-Sense window */ + u8 ipgr2; /* 96-bit IPG window */ + + u8 tpd_burst; /* Number of TPD to prefetch in a cache-aligned burst. Each TPD is 16-byte in length. */ + u8 rfd_burst; /* Number of RFD to prefetch in a cache-aligned burst. Each RFD is 12-byte in length. */ + u8 rfd_fetch_gap; + u8 rrd_burst; /* Threshold of number of RRDs can be retired in a burst. Each RRD is 16-byte in length. */ + u8 tpd_fetch_th; + u8 tpd_fetch_gap; + u16 tx_jumbo_task_th; + u16 txf_burst; /* Number of data byte to read in a cache-aligned burst. Each SRAM entry is 8-byte in length. */ + u16 rx_jumbo_th; /* Jumbo packet size for non-VLAN packet. VLAN packet should add 4-byte */ + u16 rx_jumbo_lkah; + u16 rrd_ret_timer; /* RRD retirement timer. Decrement by 1 after every 512ns passes. */ + u16 lcol; /* Collision Window */ + + u16 cmb_tpd; + u16 cmb_rrd; + u16 cmb_rx_timer; + u16 cmb_tx_timer; + u32 smb_timer; + u16 media_type; + u16 autoneg_advertised; + u16 pci_cmd_word; + + u16 mii_autoneg_adv_reg; + u16 mii_1000t_ctrl_reg; + + u32 mem_rang; + u32 txcw; + u32 max_frame_size; + u32 min_frame_size; + u32 mc_filter_type; + u32 num_mc_addrs; + u32 collision_delta; + u32 tx_packet_delta; + u16 phy_spd_default; + + u16 dev_rev; + u16 device_id; + u16 vendor_id; + u16 subsystem_id; + u16 subsystem_vendor_id; + u8 revision_id; + + /* spi flash */ + u8 flash_vendor; + + u8 dma_fairness; + u8 mac_addr[NODE_ADDRESS_SIZE]; + u8 perm_mac_addr[NODE_ADDRESS_SIZE]; + + /* bool phy_preamble_sup; */ + bool phy_configured; +}; + +#endif /* _ATL1_HW_H_ */ diff --git a/drivers/net/atl1/atl1_osdep.h b/drivers/net/atl1/atl1_osdep.h new file mode 100644 index 0000000..8e0c097 --- /dev/null +++ b/drivers/net/atl1/atl1_osdep.h @@ -0,0 +1,78 @@ +/** atl1_osdep.h + +Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. +Copyright(c) 2006 Chris Snook +Copyright(c) 2006 Jay Cliburn + +Derived from Intel e1000 driver +Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + +This program is free software; you can redistribute it and/or modify it +under the terms of the GNU General Public License as published by the Free +Software Foundation; either version 2 of the License, or (at your option) +any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT +ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +more details. + +You should have received a copy of the GNU General Public License along with +this program; if not, write to the Free Software Foundation, Inc., 59 +Temple Place - Suite 330, Boston, MA 02111-1307, USA. +*/ + +#ifndef _ATL1_OSDEP_H_ +#define _ATL1_OSDEP_H_ + +#include +#include +#include +#include +#include +#include + +#define usec_delay(x) udelay(x) +#ifndef msec_delay +#define msec_delay(x) do { if(in_interrupt()) { \ + /* Don't mdelay in interrupt context!*/ \ + BUG(); \ + } else { \ + msleep(x); \ + }} while(0) +/* Some workarounds require millisecond delays and are run during interrupt + * context. Most notably, when establishing link, the phy may need tweaking + * but cannot process phy register reads/writes faster than millisecond + * intervals...and we establish link due to a "link status change" interrupt. + */ +#define msec_delay_irq(x) mdelay(x) +#endif + +#define PCI_COMMAND_REGISTER PCI_COMMAND +#define CMD_MEM_WRT_INVALIDATE PCI_COMMAND_INVALIDATE + +#define AT_WRITE_REG(a, reg, value) ( \ + writel((value), ((a)->hw_addr + reg))) + +#define AT_READ_REG(a, reg) ( \ + readl((a)->hw_addr + reg )) + +#define AT_WRITE_REGB(a, reg, value) (\ + writeb((value), ((a)->hw_addr + reg))) + +#define AT_READ_REGB(a, reg) (\ + readb((a)->hw_addr + reg)) + +#define AT_WRITE_REGW(a, reg, value) (\ + writew((value), ((a)->hw_addr + reg))) + +#define AT_READ_REGW(a, reg) (\ + readw((a)->hw_addr + reg)) + +#define AT_WRITE_REG_ARRAY(a, reg, offset, value) ( \ + writel((value), (((a)->hw_addr + reg) + ((offset) << 2)))) + +#define AT_READ_REG_ARRAY(a, reg, offset) ( \ + readl(((a)->hw_addr + reg) + ((offset) << 2))) + +#endif /* _ATL1_OSDEP_H_ */ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/