Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Mark Brown <broonie@kernel.org>
To:     Vincent Pelletier <plr.vincent@gmail.com>,
        Support Opensource <support.opensource@diasemi.com>,
        Liam Girdwood <lgirdwood@gmail.com>,
        linux-kernel@vger.kernel.org
Cc:     Mark Brown <broonie@kernel.org>
Subject: Re: [PATCH v6] regulator: da9063: Add support for full-current mode.
Date:   Thu, 15 Jul 2021 20:54:01 +0100
Message-Id: <162637868447.27563.13293081169063391335.b4-ty@kernel.org>
In-Reply-To: <824518e6391b783a12eba9ff0527f06607a34bfb.1626160826.git.plr.vincent@gmail.com>
References: <824518e6391b783a12eba9ff0527f06607a34bfb.1626160826.git.plr.vincent@gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 8bit
Precedence: bulk

On Tue, 13 Jul 2021 07:20:31 +0000, Vincent Pelletier wrote:
> In addition to the ability of merging some power outputs, this chip has
> an overdrive mode.
> BCORE1, BCORE2 and BPRO have this ability, in which case the legal
> current draw is increased from 2 amps to 2.5 amps (at the expense of
> a quiescent current increase), and the configurable current limits
> are doubled.
> If a current higher than maximum half-current mode is requested, enable
> overdrive, and scale the current limit down.
> Symmetrically, scale the current limit up when querying a overdrive-enabled
> regulator.

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[1/1] regulator: da9063: Add support for full-current mode.
      commit: 541ee8f640327f951e7039278057827322231ab0

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark