Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
To:     Linus Walleij <linus.walleij@linaro.org>,
        Bartosz Golaszewski <bgolaszewski@baylibre.com>,
        Lee Jones <lee.jones@linaro.org>
Cc:     Andrew Lunn <andrew@lunn.ch>,
        Andy Shevchenko <andy.shevchenko@gmail.com>,
        linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
        Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Subject: [PATCH v3 2/7] mfd: tqmx86: clear GPIO IRQ resource when no IRQ is set
Date:   Fri, 16 Jul 2021 12:00:48 +0200
Message-Id: <65f9787ebd6725e90fad9ea7f936ee0d5712da94.1626429286.git.matthias.schiffer@ew.tq-group.com>
In-Reply-To: <cover.1626429286.git.matthias.schiffer@ew.tq-group.com>
References: <cover.1626429286.git.matthias.schiffer@ew.tq-group.com>
In-Reply-To: <cover.1626429286.git.matthias.schiffer@ew.tq-group.com>
References: <cover.1626429286.git.matthias.schiffer@ew.tq-group.com>
Precedence: bulk

The driver was registering IRQ 0 when no IRQ was set. This leads to
warnings with newer kernels.

Clear the resource flags, so no resource is registered at all in this
case.

Fixes: 2f17dd34ffed ("mfd: tqmx86: IO controller with I2C, Wachdog and GPIO")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---

v2: add Fixes line
v3: no changes

 drivers/mfd/tqmx86.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/mfd/tqmx86.c b/drivers/mfd/tqmx86.c
index ddddf08b6a4c..732013f40e4e 100644
--- a/drivers/mfd/tqmx86.c
+++ b/drivers/mfd/tqmx86.c
@@ -209,6 +209,8 @@ static int tqmx86_probe(struct platform_device *pdev)
 
 		/* Assumes the IRQ resource is first. */
 		tqmx_gpio_resources[0].start = gpio_irq;
+	} else {
+		tqmx_gpio_resources[0].flags = 0;
 	}
 
 	ocores_platfom_data.clock_khz = tqmx86_board_id_to_clk_rate(board_id);
-- 
2.17.1