Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Anand Moon <linux.amoon@gmail.com>
To:     linux-phy@lists.infradead.org,
        linux-arm-kernel@lists.infradead.org,
        linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Cc:     Anand Moon <linux.amoon@gmail.com>,
        Matt Corallo <oc2udbzfd@mattcorallo.com>,
        Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
        Rob Herring <robh+dt@kernel.org>,
        Neil Armstrong <narmstrong@baylibre.com>,
        Kevin Hilman <khilman@baylibre.com>,
        Jerome Brunet <jbrunet@baylibre.com>,
        Kishon Vijay Abraham I <kishon@ti.com>,
        Vinod Koul <vkoul@kernel.org>,
        Emiliano Ingrassia <ingrassia@epigenesys.com>,
        Brian Kim <brian.kim@hardkernel.com>,
        devicetree@vger.kernel.org
Subject: [PATCHv2 2/4] arm64: dts: amlogic: odroidc2: Fix the chip enable signal for usb power
Date:   Fri, 16 Jul 2021 10:36:34 +0000
Message-Id: <20210716103651.1455-3-linux.amoon@gmail.com>
In-Reply-To: <20210716103651.1455-1-linux.amoon@gmail.com>
References: <20210716103651.1455-1-linux.amoon@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Fix the chip enable signal changing from Active High to Active Low
to enable input power to USB power. Also updated signal name as per
the shematics.

Fixes: 5a0803bd5ae2 ("ARM64: dts: meson-gxbb-odroidc2: Enable USB Nodes")

Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
New patch in this series
---
 arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 201596247fd9..3f4f16a5dedd 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -38,12 +38,11 @@ usb_otg_pwr: regulator-usb-pwrs {
 		regulator-max-microvolt = <5000000>;
 
 		/*
-		 * signal name from schematics: PWREN
+		 * signal name from schematics: PWREN - GPIOAO.BIT5
 		 */
-		gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
+		gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_LOW>;
 		/*
-		 * signal name from schematics: USB_POWER
+		 * signal name from schematics: USB_POWER - P5V0
 		 */
 		vin-supply = <&p5v0>;
 	};
-- 
2.32.0