Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Amelie Delaunay <amelie.delaunay@foss.st.com>
To:     Heikki Krogerus <heikki.krogerus@linux.intel.com>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Saravana Kannan <saravanak@google.com>
CC:     <linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <linux-stm32@st-md-mailman.stormreply.com>,
        Amelie Delaunay <amelie.delaunay@foss.st.com>,
        Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Subject: [PATCH 1/2] usb: typec: stusb160x: register role switch before interrupt registration
Date:   Fri, 16 Jul 2021 14:07:17 +0200
Message-ID: <20210716120718.20398-2-amelie.delaunay@foss.st.com>
In-Reply-To: <20210716120718.20398-1-amelie.delaunay@foss.st.com>
References: <20210716120718.20398-1-amelie.delaunay@foss.st.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

During interrupt registration, attach state is checked. If attached, then
the Type-C state is updated with typec_set_xxx functions and role switch is
set with usb_role_switch_set_role().
If the usb_role_switch parameter is error or null, the function simply
returns 0.
So, to update usb_role_switch role if a device is attached before the irq
is registered, usb_role_switch must be registered before irq registration.

Fixes: da0cb6310094 ("usb: typec: add support for STUSB160x Type-C controller family")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
---
 drivers/usb/typec/stusb160x.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/typec/stusb160x.c b/drivers/usb/typec/stusb160x.c
index 6eaeba9b096e..3d3848e7c2c2 100644
--- a/drivers/usb/typec/stusb160x.c
+++ b/drivers/usb/typec/stusb160x.c
@@ -739,10 +739,6 @@ static int stusb160x_probe(struct i2c_client *client)
 	typec_set_pwr_opmode(chip->port, chip->pwr_opmode);
 
 	if (client->irq) {
-		ret = stusb160x_irq_init(chip, client->irq);
-		if (ret)
-			goto port_unregister;
-
 		chip->role_sw = fwnode_usb_role_switch_get(fwnode);
 		if (IS_ERR(chip->role_sw)) {
 			ret = PTR_ERR(chip->role_sw);
@@ -752,6 +748,10 @@ static int stusb160x_probe(struct i2c_client *client)
 					ret);
 			goto port_unregister;
 		}
+
+		ret = stusb160x_irq_init(chip, client->irq);
+		if (ret)
+			goto role_sw_put;
 	} else {
 		/*
 		 * If Source or Dual power role, need to enable VDD supply
@@ -775,6 +775,9 @@ static int stusb160x_probe(struct i2c_client *client)
 
 	return 0;
 
+role_sw_put:
+	if (chip->role_sw)
+		usb_role_switch_put(chip->role_sw);
 port_unregister:
 	typec_unregister_port(chip->port);
 all_reg_disable:
-- 
2.25.1