Date: Wed, 14 Nov 2001 01:04:37 +0100
From: Christoph Kampe <kernelml@kampe.net>
To: linux-kernel@vger.kernel.org
Subject: Re: usb-storage fails with datafab md2-usb (ide hdd on usb) on newer kernels >2.4.8
Message-ID: <20011114010437.B1174@kampe.net>
In-Reply-To: <20011114004123.A1174@kampe.net>
Mime-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <20011114004123.A1174@kampe.net>
User-Agent: Mutt/1.3.23i
Sender: linux-kernel-owner@vger.kernel.org

On Wed, Nov 14, 2001 at 12:41:23AM +0100, Christoph Kampe wrote:
... very much, but not the Problemdescription.

Hi again,
sorry i forget to write what went wrong with the DataFab Storage.

Actually, with 2.4.8 when i connect the usb-storage it loads all
necessary modules and a mount takes less then 1second.

With 2.4.15-pre4 it loads the three modules too but, it gives 
> kernel: usb-storage: *** thread sleeping.
> kernel: scsi: device set offline - not ready or command retry failed after 
>   bus reset: host 0 channel 0 id 0 lun 0
> kernel:  I/O error: dev 08:05, sector 0
in my log.
as i wrote in my last mail (last 10 lines)
a mount won?t work, takes some time and breaks with 
"I/O error:dev 08:05, sector 0"

I dont?t know exactly if it fails because of the usb-storage or the 
scsi_mod module.

Regards 
Christoph

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/