Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Rob Herring <robh@kernel.org>
To:     satya priya <skakit@codeaurora.org>
Cc:     linux-arm-msm@vger.kernel.org,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        kgunda@codeaurora.org, devicetree@vger.kernel.org,
        Rob Herring <robh+dt@kernel.org>, linux-gpio@vger.kernel.org,
        Andy Gross <agross@kernel.org>,
        Linus Walleij <linus.walleij@linaro.org>,
        linux-kernel@vger.kernel.org
In-Reply-To: <1626692855-10194-2-git-send-email-skakit@codeaurora.org>
References: <1626692855-10194-1-git-send-email-skakit@codeaurora.org> <1626692855-10194-2-git-send-email-skakit@codeaurora.org>
Subject: Re: [PATCH V6 1/2] dt-bindings: pinctrl: qcom-pmic-gpio: Convert qcom pmic gpio bindings to YAML
Date:   Mon, 19 Jul 2021 09:27:59 -0600
Message-Id: <1626708479.383201.1967261.nullmailer@robh.at.kernel.org>
Precedence: bulk

On Mon, 19 Jul 2021 16:37:34 +0530, satya priya wrote:
> Convert Qualcomm PMIC GPIO bindings from .txt to .yaml format.
> 
> Signed-off-by: satya priya <skakit@codeaurora.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
> Changes in V2:
>  - As per Rob's comments fixed bot erros.
>  - Moved this patch to end of the series so that other patches are not
>    blocked on this.
> 
> Changes in V3:
>  - As per Rob's comments, added maxItems for reg and interrupts.
>    Added reference of "pinmux-node.yaml" and "pincfg-node.yaml".
>    Made 'additionalProperties' as false.
> 
> Changes in V4:
>  - As per Rob's comments, added description for interrupts, defined
>    constraints for "qcom,drive-strength", dropped description for function
>    property.
> 
> Changes in RESEND V4:
>  - Rebased on linux-next and sent.
> 
> Changes in V5:
>  - Fixed Bjorn's comments on [1]
> 
>  [1] https://lore.kernel.org/patchwork/patch/1434144/
> 
> Changes in V6:
>  - As per Bjorn's comments, removed formatting for description, changed
>    node name to be more specific to qcom pmic, and fixed few other minor
>    things as suggested here [2].
> 
>  [2] https://lore.kernel.org/patchwork/patch/1452812/#1654560
> 
>  .../devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 288 ---------------------
>  .../bindings/pinctrl/qcom,pmic-gpio.yaml           | 259 ++++++++++++++++++
>  2 files changed, 259 insertions(+), 288 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mfd/qcom,pm8008.example.dt.yaml: gpio@c000: compatible: ['qcom,pm8008-gpio'] is too short
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mfd/qcom,pm8008.example.dt.yaml: gpio@c000: 'gpio-ranges' is a required property
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
\ndoc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1506906

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.