Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
MIME-Version: 1.0
References: <1626430843-23823-1-git-send-email-dillon.minfei@gmail.com>
 <1626430843-23823-2-git-send-email-dillon.minfei@gmail.com>
 <CACRpkdbkOY08THPsPHfOOMeToHGXZvN2DBoKG9+WHeke9jypzQ@mail.gmail.com> <CAL9mu0JufzC_2p+X0PHdEpuYUqCNJ6XoT+f18oEsRa5Wm7wS3g@mail.gmail.com>
In-Reply-To: <CAL9mu0JufzC_2p+X0PHdEpuYUqCNJ6XoT+f18oEsRa5Wm7wS3g@mail.gmail.com>
From:   Dillon Min <dillon.minfei@gmail.com>
Date:   Wed, 21 Jul 2021 16:08:38 +0800
Message-ID: <CAL9mu0KGndejkS5joUGqTSfCASWCZeAmDpsCawPZhginFCE-Ow@mail.gmail.com>
Subject: Fwd: [PATCH 1/2] dt-bindings: display: panel: Add ilitek ili9341
 panel bindings
To:     Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@vger.kernel.org>
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

Hi Linus,

Thanks for your detailed reply.

On Sun, 18 Jul 2021 at 08:17, Linus Walleij <linus.walleij@linaro.org> wrote:
>
> Hi Dillon,
>
> thanks for your patch!
>
> On Fri, Jul 16, 2021 at 12:20 PM <dillon.minfei@gmail.com> wrote:
>
> > From: Dillon Min <dillon.minfei@gmail.com>
> >
> > Add documentation for "ilitek,ili9341" panel.
> >
> > Signed-off-by: Dillon Min <dillon.minfei@gmail.com>
>
> > +  dc-gpios:
> > +    maxItems: 1
> > +    description: Display data/command selection (D/CX)
>
> This is a DBI feature so mention in the description that this is a
> DBI panel.


Okay, I will add the DBI panel to v2.

>
>
> > +  spi-3wire: true
> > +
> > +  spi-max-frequency:
> > +    const: 10000000
> > +
> > +  port: true
> > +
> > +additionalProperties: false
>
> Please add regulator supplies for the power lines, it's fine
> not to implement code handling them in the driver but they
> should be in the bindings.
>
> For the ili9341 it should be
>
>   vci-supply:
>     description: Analog voltage supply (2.5 .. 3.3V)
>
>   vddi-supply:
>     description: Voltage supply for interface logic (1.65 .. 3.3 V)
>
>   vddi-led-supply:
>     description: Voltage supply for the LED driver (1.65 .. 3.3 V)
>

Thanks so much, I will add it to v2.

>
> Yours,
> Linus Walleij