Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Subject: Re: [PATCH v2 3/4] arm64: dts: ti: k3-am642-evm: Add pwm nodes
To:     Lokesh Vutla <lokeshvutla@ti.com>, Nishanth Menon <nm@ti.com>,
        <kristo@kernel.org>
CC:     Device Tree Mailing List <devicetree@vger.kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Linux ARM Mailing List <linux-arm-kernel@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>, Vignesh R <vigneshr@ti.com>
References: <20210721113625.17299-1-lokeshvutla@ti.com>
 <20210721113625.17299-4-lokeshvutla@ti.com>
From:   Grygorii Strashko <grygorii.strashko@ti.com>
Message-ID: <5f07d2a6-2b35-5222-cec4-dba083f23c9c@ti.com>
Date:   Wed, 21 Jul 2021 21:27:28 +0300
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101
 Thunderbird/78.11.0
MIME-Version: 1.0
In-Reply-To: <20210721113625.17299-4-lokeshvutla@ti.com>
Content-Type: text/plain; charset="utf-8"; format=flowed
Content-Language: en-US
Content-Transfer-Encoding: 7bit
Precedence: bulk


On 21/07/2021 14:36, Lokesh Vutla wrote:
> ecap0 can be configured to use pad ECAP0_IN_APWM_OUT (D18) which has a
> signal connected to Pin 1 of J12 on EVM. Add support for adding this
> pinmux so that pwm can be observed on pin 1 of Header J12
> 
> Also mark all un-used epwm and ecap pwm nodes as disabled.
> 
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> ---
>   arch/arm64/boot/dts/ti/k3-am642-evm.dts | 56 +++++++++++++++++++++++++
>   1 file changed, 56 insertions(+)
> 

Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>

-- 
Best regards,
grygorii