Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Jernej Skrabec <jernej.skrabec@gmail.com>
To:     mripard@kernel.org, wens@csie.org
Cc:     robh+dt@kernel.org, jernej.skrabec@gmail.com,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: [PATCH v2 0/3] arm64: dts: allwinner: h6: tanix-tx6: Enable eMMC
Date:   Thu, 22 Jul 2021 18:12:17 +0200
Message-Id: <20210722161220.51181-1-jernej.skrabec@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Tanix TX6 box has a 32 GB eMMC module. With changes in this series, I
get following figures with hdparm -tT:

/dev/mmcblk2:
 Timing cached reads:   1638 MB in  2.00 seconds = 818.44 MB/sec
 Timing buffered disk reads: 376 MB in  3.01 seconds = 124.74 MB/sec

First patch fixes regulator node names. Second patch sets proper power
supplies to GPIO banks and third adds eMMC support.

Please take a look.

Best regards,
Jernej Skrabec

Changes from v1:
- added patch 1 (fixing regulator node names with "regulator-" prefix)
- fixed regulator node name in patch 2 (adding "regulator-" prefix)

Jernej Skrabec (3):
  arm64: dts: allwinner: h6: tanix-tx6: Fix regulator node names
  arm64: dts: allwinner: h6: tanix-tx6: Add PIO power supplies
  arm64: dts: allwinner: h6: tanix-tx6: enable emmc

 .../dts/allwinner/sun50i-h6-tanix-tx6.dts     | 27 +++++++++++++++++--
 1 file changed, 25 insertions(+), 2 deletions(-)

-- 
2.32.0