Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
MIME-Version: 1.0
References: <20210721235526.10588-1-msbroadf@gmail.com> <7b02cb66-d672-ae95-01ea-c6015725e1ac@linuxfoundation.org>
 <CALdjXpA4_eXen6RjhsEBYt8CQs-2gzwYs9h9q0Z2LKZ=rXVp+Q@mail.gmail.com> <ad07410b-05d6-6a12-13df-14e31cbf50ff@linuxfoundation.org>
In-Reply-To: <ad07410b-05d6-6a12-13df-14e31cbf50ff@linuxfoundation.org>
From:   Michael <msbroadf@gmail.com>
Date:   Sat, 24 Jul 2021 09:58:54 +1000
Message-ID: <CALdjXpBPRraC8xxORgE3SXw4xFnTW-Y6rLbcS+Cx0xYq3+aBeQ@mail.gmail.com>
Subject: Re: [PATCH v2] vhci_hcd: USB port can get stuck in the disabled state
To:     Shuah Khan <skhan@linuxfoundation.org>
Cc:     valentina.manea.m@gmail.com, shuah@kernel.org,
        gregkh@linuxfoundation.org, linux-usb@vger.kernel.org,
        linux-kernel@vger.kernel.org
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

Here is the lsusb on the client when the device fails to attach
---------------------------------------
michael@ubuntu:~$ lsusb
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


Here is the lsusb on the host before use
-----------------------------------------------------
pi@raspberrypi:~ $ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 045e:02e6 Microsoft Corp. Wireless XBox Controller Dongle
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

On Sat, 24 Jul 2021 at 02:29, Shuah Khan <skhan@linuxfoundation.org> wrote:
>
> On 7/21/21 8:27 PM, Michael wrote:
> > You can pass through any bluetooth dongle (or xbox wireless dongle) through usbip and it will cause this issue.
> >
> > For example, here is one of my customers https://www.virtualhere.com/comment/9432#comment-9432 <https://www.virtualhere.com/comment/9432#comment-9432> with the issue.
> >
> > The device is in the VDEV_ST_USED state when a reset occurs and so its never re-enabled
> >
> > Furthermore there is a bug in the line pr_err("vhci_device speed not set\n");
> > (L479) because resetting a full-speed device is not an error.
> >
>
> Can you provide me the full demsg from host and client including the part
> where device is attached? I assume usbip tools from Linux sources are used?
>
> Also send me lsusb output on host and client
>
> thanks,
> -- Shuah