Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Stefan Riedmueller <s.riedmueller@phytec.de>
To:     Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
        Mauro Carvalho Chehab <mchehab@kernel.org>,
        Rob Herring <robh+dt@kernel.org>
Cc:     Stefan Riedmueller <s.riedmueller@phytec.de>,
        Rob Herring <robh@kernel.org>,
        Sakari Ailus <sakari.ailus@linux.intel.com>,
        linux-media@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: [PATCH v7 6/6] media: dt-bindings: mt9p031: Add missing required properties
Date:   Mon, 26 Jul 2021 09:35:18 +0200
Message-Id: <20210726073518.2167398-7-s.riedmueller@phytec.de>
In-Reply-To: <20210726073518.2167398-1-s.riedmueller@phytec.de>
References: <20210726073518.2167398-1-s.riedmueller@phytec.de>
MIME-Version: 1.0
Content-Transfer-Encoding: quoted-printable
Precedence: bulk

Add missing required clocks and supply regulator properties for the
sensor input clock and vdd, vdd=5Fio and vaa supply regulators.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/media/i2c/aptina,mt9p031.yaml    | 22 +++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yam=
l b/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
index bc0e8e5194e8..c2ba78116dbb 100644
--- a/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
@@ -24,6 +24,18 @@ properties:
     description: I2C device address
     maxItems: 1
=20
+  clocks:
+    maxItems: 1
+
+  vdd-supply:
+    description: Digital supply voltage, 1.8 V
+
+  vdd=5Fio-supply:
+    description: I/O supply voltage, 1.8 or 2.8 V
+
+  vaa-supply:
+    description: Analog supply voltage, 2.8 V
+
   reset-gpios:
     maxItems: 1
     description: Chip reset GPIO
@@ -59,6 +71,10 @@ properties:
 required:
   - compatible
   - reg
+  - clocks
+  - vdd-supply
+  - vdd=5Fio-supply
+  - vaa-supply
   - port
=20
 additionalProperties: false
@@ -74,6 +90,12 @@ examples:
             reg =3D <0x5d>;
             reset-gpios =3D <&gpio=5Fsensor 0 0>;
=20
+            clocks =3D <&sensor=5Fclk>;
+
+            vdd-supply =3D <&reg=5Fvdd>;
+            vdd=5Fio-supply =3D <&reg=5Fvdd=5Fio>;
+            vaa-supply =3D <&reg=5Fvaa>;
+
             port {
                 mt9p031=5F1: endpoint {
                     input-clock-frequency =3D <6000000>;
--=20
2.25.1