Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Sender: Emil Renner Berthing <emil.renner.berthing@gmail.com>
From:   Emil Renner Berthing <kernel@esmil.dk>
To:     Lee Jones <lee.jones@linaro.org>, Rob Herring <robh+dt@kernel.org>,
        Sebastian Reichel <sebastian.reichel@collabora.com>
Cc:     Emil Renner Berthing <kernel@esmil.dk>, devicetree@vger.kernel.org,
        linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 4/4] mfd: tps65086: Add cell entry for reset driver
Date:   Tue, 27 Jul 2021 11:25:54 +0200
Message-Id: <20210727092554.1059305-5-kernel@esmil.dk>
In-Reply-To: <20210727092554.1059305-1-kernel@esmil.dk>
References: <20210727092554.1059305-1-kernel@esmil.dk>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The only way to reset the BeagleV Starlight v0.9 board[1] properly is to
tell the PMIC to reset itself which will then assert the external reset
lines of the SoC, USB hub and ethernet phy.

This adds an mfd cell entry for the reset driver doing just that.

[1] https://github.com/beagleboard/beaglev-starlight

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
---
 drivers/mfd/tps65086.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/mfd/tps65086.c b/drivers/mfd/tps65086.c
index cc3478ee9a64..3bd5728844a0 100644
--- a/drivers/mfd/tps65086.c
+++ b/drivers/mfd/tps65086.c
@@ -24,6 +24,7 @@
 static const struct mfd_cell tps65086_cells[] = {
 	{ .name = "tps65086-regulator", },
 	{ .name = "tps65086-gpio", },
+	{ .name = "tps65086-reset", },
 };
 
 static const struct regmap_range tps65086_yes_ranges[] = {
-- 
2.32.0