Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S934963AbWKYNVj (ORCPT ); Sat, 25 Nov 2006 08:21:39 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S934965AbWKYNVj (ORCPT ); Sat, 25 Nov 2006 08:21:39 -0500 Received: from rwcrmhc15.comcast.net ([216.148.227.155]:15787 "EHLO rwcrmhc15.comcast.net") by vger.kernel.org with ESMTP id S934963AbWKYNVi (ORCPT ); Sat, 25 Nov 2006 08:21:38 -0500 Message-ID: <45684360.1060801@comcast.net> Date: Sat, 25 Nov 2006 08:21:36 -0500 From: Ed Sweetman User-Agent: Icedove 1.5.0.8 (X11/20061116) MIME-Version: 1.0 To: Gene Heskett CC: linux-kernel@vger.kernel.org, linux-usb-devel@lists.sourceforge.net Subject: Re: 2.6.19-rc5-mm2 : usb keeps resetting usb keyboard. References: <4567BB70.6080907@comcast.net> <200611242321.02776.gene.heskett@verizon.net> In-Reply-To: <200611242321.02776.gene.heskett@verizon.net> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 13911 Lines: 410 Gene Heskett wrote: > On Friday 24 November 2006 22:41, Ed Sweetman wrote: > >> I just upgraded from a ps2 keyboard to usb and have been getting these >> messages seemingly randomly, which also corresponds to whatever key i'm >> pressing at the time they occur to act like it's stuck down. >> >> usb 2-2: reset low speed USB device using ohci_hcd and address 3 >> usb 2-2: reset low speed USB device using ohci_hcd and address 3 >> usb 2-2: reset low speed USB device using ohci_hcd and address 3 >> usb 2-2: reset low speed USB device using ohci_hcd and address 3 >> usb 2-2: reset low speed USB device using ohci_hcd and address 3 >> usb 2-2: reset low speed USB device using ohci_hcd and address 3 >> usb 2-2: reset low speed USB device using ohci_hcd and address 3 >> >> (repeated a few hundred times ) >> >> > All the data below doesn't point to the culprit. > > I also have this, and I'd bet the common point is going to be an M$ > wireless mouse like I have. The mouse works ok as near as I can tell, so > I'm not sure of the exact cause. > > To verify, unplug the receiver for that mouse, wait 5secs, and plug it > back in, which if thats it should move the mouse, and the log message to > a higher number on the usb tree. > > Also, FWIW dear lkml readers, my logs have been contaminated with this > since about a year ago, running kernel.org kernels on an FC2 system, but > using the latest FC6 non-xen kernel. > I dont have a wireless usb mouse or any hardware from microsoft running. My usb mouse is a standard logitech that i've been using for a couple years. I haven't had these errors in my log before installing my usb keyboard. These are the only usb devices in the system. below is my lsusb -v. For what it's worth. Bus 002 Device 003: ID 046d:c00c Logitech, Inc. Optical Wheel Mouse Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x046d Logitech, Inc. idProduct 0xc00c Optical Wheel Mouse bcdDevice 6.10 iManufacturer 1 Logitech iProduct 2 USB Mouse iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Devices bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 2 Mouse iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 68 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Device Status: 0x0000 (Bus Powered) Bus 002 Device 002: ID 1267:0103 Logic3 / SpectraVideo plc Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x1267 Logic3 / SpectraVideo plc idProduct 0x0103 bcdDevice 1.01 iManufacturer 0 iProduct 0 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 59 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Devices bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 1 Keyboard iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 54 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Devices bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 52 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0003 1x 3 bytes bInterval 10 Device Status: 0x0000 (Bus Powered) Bus 002 Device 001: ID 0000:0000 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed hub bMaxPacketSize0 64 idVendor 0x0000 idProduct 0x0000 bcdDevice 2.06 iManufacturer 3 Linux 2.6.19-rc5-mm2 ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:02.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 11 bDescriptorType 41 nNbrPorts 10 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 0x00 PortPwrCtrlMask 0xff 0xff Hub Port Status: Port 1: 0000.0303 lowspeed power enable connect Port 2: 0000.0303 lowspeed power enable connect Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0100 power Port 6: 0000.0100 power Port 7: 0000.0100 power Port 8: 0000.0100 power Port 9: 0000.0100 power Port 10: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled Bus 001 Device 001: ID 0000:0000 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 1 Single TT bMaxPacketSize0 64 idVendor 0x0000 idProduct 0x0000 bcdDevice 2.06 iManufacturer 3 Linux 2.6.19-rc5-mm2 ehci_hcd iProduct 2 EHCI Host Controller iSerial 1 0000:00:02.1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 11 bDescriptorType 41 nNbrPorts 10 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 0x00 PortPwrCtrlMask 0xff 0xff Hub Port Status: Port 1: 0000.0000 Port 2: 0000.0000 Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0100 power Port 6: 0000.0100 power Port 7: 0000.0100 power Port 8: 0000.0100 power Port 9: 0000.0100 power Port 10: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled > >From an lsusb -v: > ---------- > Bus 002 Device 003: ID 045e:008c Microsoft Corp. Wireless Intellimouse > Explorer 2.0 > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 2.00 > bDeviceClass 0 (Defined at Interface level) > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 8 > idVendor 0x045e Microsoft Corp. > idProduct 0x008c Wireless Intellimouse Explorer 2.0 > bcdDevice 0.57 > iManufacturer 1 Microsoft > iProduct 2 Microsoft Wireless Optical Mouse 1.0A > iSerial 0 > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 34 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 0 > bmAttributes 0xa0 > Remote Wakeup > MaxPower 50mA > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 1 > bInterfaceClass 3 Human Interface Devices > bInterfaceSubClass 1 Boot Interface Subclass > bInterfaceProtocol 2 Mouse > iInterface 0 > HID Device Descriptor: > bLength 9 > bDescriptorType 33 > bcdHID 1.11 > bCountryCode 0 Not supported > bNumDescriptors 1 > bDescriptorType 34 Report > wDescriptorLength 209 > Report Descriptors: > ** UNAVAILABLE ** > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 EP 1 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x0008 1x 8 bytes > bInterval 10 > ------------------- > > How close am I in this suposition? > > - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/